Electric Scooter Extended Range Battery Pack 3d model
Warning. This content is not moderated and could be offensive.
weapons
3dmdb logo
GrabCAD
Electric Scooter Extended Range Battery Pack

Electric Scooter Extended Range Battery Pack

by GrabCAD
Last crawled date: 2 years ago
This is a CAD model of my newly designed scooter battery packs. I will be using two of these packs and a custom controller for my brushless 3-phase hub-motor based scooter. Each battery pack is setup in a 8s6p configuration (8 series, 6 parallel), for 48 cells in total. Every 26650 cell has a capacity of ~2.5ah each, with a 3.3v nominal voltage. 26.4v*15ah=396wh, making each pack 396wh. The 2 packs will be in series, giving an overall scooter battery capacity of 16s6p, or 792wh.
The top & bottom plates are clear acrylic, the black cell holder is polycarbonate plastic, the standoffs are plastic, and the hardware is plastic. This is a lot of energy, so care was taken to use non-conductive materials whenever possible. Silicon was used between the cell terminals and the clear acrylic outer sheet. I used Anderson SB50 connectors in the final iteration of the battery wiring design, and surrounded the battery in 1/8in rubber sheet.

The CAD for the nuts and bolts are from mcmastercarr:
https://www.mcmaster.com/#96367a671/=16l2r8t
https://www.mcmaster.com/#90387A332

Let me know what you think of it. I hope you enjoy it!

Tags