Thingiverse
Electric outboard propeller by scobo
by Thingiverse
Last crawled date: 3 years ago
The propeller for my Bison electric outboard motor was getting a bit beaten up looking so I thought I'd have a go at making one with the 3d printer and 123D Design CAD software.
It's not an exact copy of the original but pretty close and fits very well.
It might also fit other makes of outboard as I've seen others with very similar looking props.
Update 8/7/2016 :-
Firtsly, apologies for taking so long to provide an update for this.
After testing version 1 on water, it turned out to be a little under powered due to the blades being too thin so I've made another version of the blades which are slightly thicker and so more rigid providing better thrust.
I've also produced a third version which can be printed as one whole piece if you have a 200x200mm bed.
This version was made with the same center piece (or prop head) I drew with CAD software but the blades were produced using a 3D scanner to scan the original blades. The 3D scan is extremely accurate so the blades on this version are pretty much a perfect copy of the Bison prop blades.
The blades were then merged with the center piece in 123D Design to produce a final STL file of the whole prop.
If you attempt to print this version, you will of course need supports and I'd recomment at least 20% infill.
I did try scanning the whole prop but there was a bit too much detail in the center piece to get a usable model.
Update 16/8/2016 :-
Some minor tweaking of the whole prop version to get a better fit and less friction.
I would recommend this version if you have a large enough build plate as it is the closest to the original prop and provides much better thrust.
It's not an exact copy of the original but pretty close and fits very well.
It might also fit other makes of outboard as I've seen others with very similar looking props.
Update 8/7/2016 :-
Firtsly, apologies for taking so long to provide an update for this.
After testing version 1 on water, it turned out to be a little under powered due to the blades being too thin so I've made another version of the blades which are slightly thicker and so more rigid providing better thrust.
I've also produced a third version which can be printed as one whole piece if you have a 200x200mm bed.
This version was made with the same center piece (or prop head) I drew with CAD software but the blades were produced using a 3D scanner to scan the original blades. The 3D scan is extremely accurate so the blades on this version are pretty much a perfect copy of the Bison prop blades.
The blades were then merged with the center piece in 123D Design to produce a final STL file of the whole prop.
If you attempt to print this version, you will of course need supports and I'd recomment at least 20% infill.
I did try scanning the whole prop but there was a bit too much detail in the center piece to get a usable model.
Update 16/8/2016 :-
Some minor tweaking of the whole prop version to get a better fit and less friction.
I would recommend this version if you have a large enough build plate as it is the closest to the original prop and provides much better thrust.
Similar models
thingiverse
free
Propeller 5 bladed by ReneeCelDesign
...tem to be pushed.
the propeller weights 3.5grams and at an rpm of aprox 20,000 produces 82 grams of thrust.
thanks,
reneecel
thingiverse
free
Lynxmotion Crazy2Fly Quadcopter Feet + Prop Guards by dmerand
...te 2015.07.27: i added a 6" prop version that's much sturdier, using fillets and rounded edges which adds some strength.
3dwarehouse
free
4 blade propeller
...4 blade propeller
3dwarehouse
couldn't find a decent prop in warehouse, so i made one for you. enjoy #4_blade #propeller
cg_trader
free
4 Blade Propeller
...ase give me a like if you would
thanks stephanie :) plane planes parts propeller 4blade free aircraft airplane part aircraft part
thingiverse
free
Assassins Creed Modern Blade by smelslikfish
...ternal mechanisms so you need to add something yourself.
happy to add something at a later stage if i get feedback on this model.
grabcad
free
DJI Inspire 1 Propeller
...
it is really hard to get the curve of the blade. i will try to use 3d scanner to scan one later.
i will keep update.
thank you.
thingiverse
free
2 Inch Tri Prop Storage Container by ApacheA117
...s for my beta85, will fit most 2" props.
also haven't had much luck with it but i'll include the vase mode versions.
thingiverse
free
Predator PDL Propeller
...y enjoy it.
this file includes the complete version as well as a split version in case the prop won't fit on your print bed.
thingiverse
free
3D Printed Outboard Propeller by ecoprinter
...ropellers this one has an real airfoil for really good efficiency.
in my little test the 3d printed propeller held up perfectly.
grabcad
free
65mm Prop
...65mm prop
grabcad
65mm press-fit bi-blade propeller with a 1.5mm center hole
Scobo
thingiverse
free
Vanity smurf 3d scan by scobo
...vanity smurf 3d scan by scobo
thingiverse
scanned with the einscan-s 3d scanner.
thingiverse
free
Darth Vader 3D scan by scobo
...darth vader 3d scan by scobo
thingiverse
scanned with the afinia es360 3d scanner (aka einscan s).
thingiverse
free
Ram's horn 3d scan by scobo
...ram's horn 3d scan by scobo
thingiverse
found this while out hill walking yesterday.
scanned with the eiscan-s 3d scanner.
thingiverse
free
Banana 3D scan by scobo
....... it's a banana !
3d scanned with the afinia es360 scanner (aka einscan-s).
it even captured the label stuck to the skin !
thingiverse
free
Radiator valve cap by scobo
...d with 0% infill and no top solid layers in order to print it hollow.
i used the afinia es360 3d scanner to copy an original cap.
thingiverse
free
Baby meerkat model 3d scan by scobo
...l 3d scan by scobo
thingiverse
another scan from the afinia es360 (aka einscan-s) 3d scanner.
the model measures 54mm in height.
thingiverse
free
Pine cone 3D scan by scobo
...nner.
the 3d printed one in the pictures was printed on my davinci 1.0 with fillamentum timberfill which is wood-based filament.
thingiverse
free
VR headset magnetic switch by scobo
... i made this finger friendly switch for a vr headset.
you need two 12x3mm magnets glued in place.
should work with most headsets.
thingiverse
free
Vaccum cleaner crevice tool by scobo
...t the supplied nozzle couldn't fit.
it will probably fit other makes of cleaner with some scaling.
designed with 123d design.
thingiverse
free
Tree frog for SLA/DLP printers by scobo
...drainage holes.
no supports required.
the one in the pictures above was printed on the anycubic photon at 0.025mm layer height.
Outboard
3d_export
$10
Outboard Motor Yamaha 40HP 3D Model
...ngine motor yamaha marine yachting boating sailing two-stroke 40hp
outboard motor yamaha 40hp 3d model southdesign 32724 3dexport
turbosquid
$89
17 ft sportboat w outboard
... 17 ft sportboat w outboard for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1664838)
turbosquid
$89
catamaran speed boat w outboard
...maran speed boat w outboard for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1662240)
turbosquid
$80
Outboard boat engine
...ty free 3d model motor boat for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1226768)
3d_export
$49
Portable Outboard Boat Motor With Tiller
... 27.66" x 31.58"<br>- model parts: 64<br>- material count: 2<br>- xform: yes<br>- boxtrick: yes
3d_export
$38
Boat 3D Model
...boat 3d model 3dexport boat oars rowboat fishing outboard boat 3d model yngvar78 53263...
3d_export
$49
Portable Outboard Boat Motor With Folded Tiller
... 16.98" x 31.58"<br>- model parts: 64<br>- material count: 2<br>- xform: yes<br>- boxtrick: yes
3d_export
$49
Portable Outboard Boat Motor With Tiller Used
... 27.66" x 31.58"<br>- model parts: 64<br>- material count: 2<br>- xform: yes<br>- boxtrick: yes
3d_export
$69
Inflatable Boat 02 Camouflage With Outboard Boat Motor
... 118.58" x 47.37"<br>- model parts: 131<br>- material count: 6<br>- xform: no<br>- boxtrick: no
3d_export
$69
Inflatable Boat 03 Black With Outboard Boat Motor
...x 132.5" x 37.89"<br>- model parts: 107<br>- material count: 6<br>- xform: no<br>- boxtrick: no
Propeller
design_connected
$11
Propeller
...propeller
designconnected
serien propeller pendant lights computer generated 3d model. designed by yaacov kaufman.
turbosquid
$15
propeller
...d
royalty free 3d model propeller for download as ma and max on turbosquid: 3d models for games, architecture, videos. (1401805)
turbosquid
$7
propeller
...
royalty free 3d model propeller for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1557413)
turbosquid
free
Propeller
...id
free 3d model propeller for download as skp, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1619462)
3d_export
$10
helicopter propeller
...helicopter propeller
3dexport
helicopter propeller
3d_export
free
propeller
...propeller
3dexport
turbosquid
$6
propeller
...y free 3d model propeller for download as ige, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1313738)
3d_export
free
aircraft propeller
...aircraft propeller
3dexport
a low poly aircraft propeller
turbosquid
$15
Propeller
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Propeller
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Electric
3d_export
$5
Electric pole
...electric pole
3dexport
electric pole for street, electricity line
3ddd
$1
electric mixer
...electric mixer
3ddd
electric mixer , миксер
electric mixer
3ddd
$1
electrical installation
...electrical installation
3ddd
electrical installation , розетка
electrical installation
turbosquid
$19
The electric water heater electric
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Electrical Outlet electric splitter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$20
Electric Guitar
...electric guitar
3docean
electric electric guitar guitar music music instrument
model of a electric guitar created in maya.
3d_ocean
$12
Electric Shaver
...electric shaver
3docean
electric electric shaver hair removal personal care shaver shaving
electric shaver created in 3ds max.
3ddd
$1
electrical switch
...h
3ddd
electrical , розетка
electrical switch from bticino company
series livinglight
3d_export
$7
Electric Conveyor
...electric conveyor
3dexport
electric conveyor
3d_export
$5
electric drums
...electric drums
3dexport
electric drums