Thingiverse
Eleanor 5" Acro Quad by dafes
by Thingiverse
Last crawled date: 3 years ago
This is my version of an 5" Acro Quad.
It is designed for the following components:
-Naze32 FunFly Controller (without mag and baro)
-KISS ESC
-DYS 1806 Motors
Some infos can be found here:https://dafes.wordpress.com/2015/01/13/5-acro-quad/
NOTE: The Screw Holes are 3,5mm for printing and use with M3 Screws. Maybe you should use smaller holes for milling
It is designed for the following components:
-Naze32 FunFly Controller (without mag and baro)
-KISS ESC
-DYS 1806 Motors
Some infos can be found here:https://dafes.wordpress.com/2015/01/13/5-acro-quad/
NOTE: The Screw Holes are 3,5mm for printing and use with M3 Screws. Maybe you should use smaller holes for milling
Similar models
thingiverse
free
Simple Shelf by BlandPasta
...shelf by blandpasta
thingiverse
5/4" x 8" piece of wood, and #8 x 2" screws used. part has pilot hole for screws.
thingiverse
free
6mm Spacers (5mm hole) by ship13
... the openbuilds acro system. the hole is for 5mm screw or bolt and is 6mm tall.
printed on the m3d and i used a raft to print it.
thingiverse
free
Mini Quad - 130mm Frame by daPhoosa
... 12mm circle
flight controller holes are 30.5mm square (for ~36mm flight controllers)
use 1304 motors with 3" diameter props
thingiverse
free
Backpack hanger for quads by phaseshift
...e it needed about a 10mm screw. the holes are tight, you might want to drill with a 1/8" drill bit before to make it easier.
thingiverse
free
Quad legs and battery holder by Drevious
... m3 screws. if you want "shocks" then use longer screws, 35-40mm and put springs between the legs and the motor mounts.
thingiverse
free
Drone Hanger - 3"/5" size by Dr_One_aka_Layer_Man
...;, 4" 5" and probably even 6" quads.
two options, one to glue to the wall and one with the hole to screw it.
enjoy
thingiverse
free
1-Gang Plate for Ubiquiti G3 Flex Professional Wall Mount by darklis
...uot; screws for the plate mount holes.
the grommet hole accommodates up to a 5/8" od grommet. i used 5/8" od grommets.
thingiverse
free
Pipe Joiner With Screw Holes by ShuttleSpace
...t joiner. made as 2" accessory. could be shrunk for smaller stock. screw holes are tapered a bit, 5/8" screw will work
thingiverse
free
Under Shelf Mount for Wire Basket by Thebigkahune
... sized for a #8 flat head screw. used .5" screws in the photo for attaching to .75" shelf. pre-drilling is recommended.
thingiverse
free
Bearing Mount by LabRecon
...t; od and 0.195" thickness) to a surface. the holes are meant to accept #4 screws. a set screw hole is provided if needed.
Eleanor
thingiverse
free
Eleanor by MarymountK
...eleanor by marymountk
thingiverse
aubie
thingiverse
free
Eleanor from the Chippettes by Peter3dmaker
...eleanor from the chippettes by peter3dmaker
thingiverse
eleanor from the chippettes
thingiverse
free
Eleanor Final by MarymountK
...eleanor final by marymountk
thingiverse
aubie
thingiverse
free
1967 Ford Mustan Eleanor by Mooffyman13
...1967 ford mustan eleanor by mooffyman13
thingiverse
1967 ford mustan eleanor
thingiverse
free
Ford Mustang Eleanor by stunner2211
...+++do you need some spare parts like mirrors, spoilers etc.?
check out the optimized designs here. maybe something will help you.
thingiverse
free
Cool Toy Car for The Stig by Chalter
...about a stig little people driving around in the eleanor ...
thingiverse
free
Mobius Penrose-like (triangular cross-section) by kippbits
...bixby barbara cesar cleopatra cortana darwin dragonfire dorothy ebenezar eleanor fidel freya george guinevere hansel helen isaac isabel jeeves...
thingiverse
free
Tomb cover for Gaston de la Foix by GeoffreyMarchal
...grandparents were gaston iv of foix-grailly and queen regnant eleanor of navarre. his maternal grandparents were charles, duke of...
thingiverse
free
EagleCub by factlearning
...eaglecub by factlearning thingiverse eleanor used sculptgl to mix together the mesh of a...
Dafes
thingiverse
free
RigidBot Caliber Holder by dafes
...rigidbot caliber holder by dafes
thingiverse
caliber holder for the rigidbot frame
thingiverse
free
BLN-1 Cover by dafes
...bln-1 cover by dafes
thingiverse
cover for olympus bln-1 battery
thingiverse
free
RigidBot Ikea Jansjo Holder by dafes
...rigidbot ikea jansjo holder by dafes
thingiverse
holder for the ikea jansjo lamp.
thingiverse
free
RigidBot Z-Axis Support by dafes
...rigidbot z-axis support by dafes
thingiverse
support structure for the z-axis upgraded rigidbot.
thingiverse
free
DN HT50 Flansh by DaFed
...dn ht50 flansh by dafed
thingiverse
simple flansh for ht dn50 pipes. an inner rim stops the pipe from being pushed in to far.
thingiverse
free
FC Mounting Plate 30.5mm by dafes
...fc mounting plate 30.5mm by dafes
thingiverse
mounting plate for flightcontroller (30,5mm x 30,5 mm)
like naze32 or cc3d
thingiverse
free
Trifecta FatShark 600TVL Mount by dafes
...unt for quanum trifecta.http://www.hobbyking.com/hobbyking/store/__68596__quanum_trifecta_mini_foldable_tricopter_frame_kit_.html
thingiverse
free
HP Microserver Gen8 faceplate by dafes
...ate by dafes
thingiverse
this is a faceplate for a 9,5mm caddy for a 2,5" ssd or hd like http://www.amazon.de/dp/b00g4uzekg
thingiverse
free
Ikea Dioder Clip optimized for RigidBot by dafes
...idbot by dafes
thingiverse
modified version of:http://www.thingiverse.com/thing:402676
this fits slightly better the dioder bar.
thingiverse
free
SpiderHex GPS Holder by dafes
...
and the following gps module:http://www.banggood.com/ublox-neo-6m-gps-hmc5883l-ardupilot-apm-26-compass-module-fpv-p-928633.html
Acro
thingiverse
free
OpenBuilds ACRO Plates by ThothLoki
...for this thing will be donated directly to www.benboxlaser.us to continue that awesome community. https://www.paypal.me/thothloki
thingiverse
free
ACRO SYSTEMS DRAG CHAIN SYSTEM by dragonfire81m
...acro systems drag chain system by dragonfire81m
thingiverse
chain link mounting system for acro system openbuilds
thingiverse
free
Di-Acro 7.5mm Radius Finger by jeffreydreid
...di-acro 7.5mm radius finger by jeffreydreid
thingiverse
7.5mm radius finger for di-acro finger break
thingiverse
free
Laser Protector OpenBuild Acro
...openbuild acro chassis.
just add a plexiglass 60x60 of the right color regarding your laser.
you will need 2x 3mm screw and bolt.
thingiverse
free
ACRO P1 Mount For P90 by YSHTT
...acro p1 mount for p90 by yshtt
thingiverse
thingiverse
free
Trio Gym Acro by Galez
...trio gym acro by galez
thingiverse
pyramide trio chaise gymnastique acrobatique
thingiverse
free
Soporte GoPro GB Acro 25º by GBFrames
...soporte gopro gb acro 25º by gbframes
thingiverse
soporte de 25º para la gopro session para el gb acro.
thingiverse
free
Pargliding Acro Handle by theocerbo
...pargliding acro handle by theocerbo
thingiverse
this handle is ment to improve pilot accuracy with his glider
thingiverse
free
GB Acro RX antenna mount by GBFrames
...gb acro rx antenna mount by gbframes
thingiverse
soporte de antenas de rx para el gb acro en posición óptima para freestyle.
thingiverse
free
QKK Nibbio Acro plastic parts by Quadkiller
...ibbio acro drones: https://armattanproductions.com/pages/kit_detail/1114https://www.armattanproductions.com/pages/kit_detail/1264
Quad
thingiverse
free
Quad Hanger
...quad hanger
thingiverse
this is a quad hanger to hang quads on a wall or in a closet or from any place you can think of
thingiverse
free
Wild Quads Quad Wall Mount by ej908
...wild quads quad wall mount by ej908
thingiverse
wild quads for billy wild
thingiverse
free
Quad Battery Box for Fusion Quad, requires Quad body with battery box knockouts by gustofusion
...battery box knockouts by gustofusion
thingiverse
quad battery box for fusion quad, requires quad body with battery box knockouts
thingiverse
free
Quad Bot by chula9500
...quad bot by chula9500
thingiverse
the villain quad bot is a mix of a stinging bee and a quad-copter!
thingiverse
free
120mm Quad Frame for Picnic Quads Motor Mounds by alexanderjjones
...120mm quad frame for picnic quads motor mounds by alexanderjjones
thingiverse
120mm quad frame for picnic quads motor mounds
thingiverse
free
Support quad by Arnaud29
...support quad by arnaud29
thingiverse
support pour quad
thingiverse
free
small quad by ebaera
...small quad by ebaera
thingiverse
small quad parts
thingiverse
free
Quad Copter by gabetz89
...ant the story behind the construction of this quad visit https://sites.google.com/site/betzmobileengineering/projects/quad-copter
thingiverse
free
Quad Copter Motor Mount for Fusion Quad by gustofusion
...otor mount for the fusion quad intended for use with 1/4 inch dowel rod booms or 1/4 inch boom material fits the fusion quad base
thingiverse
free
Celtic Quad
...celtic quad
thingiverse
created to attach to a greetings card.
5
thingiverse
free
5 X 5 CUP by TWard891
...5 x 5 cup by tward891
thingiverse
just my design 5 inch x 5 inch cup. super simple
thingiverse
free
Tri-Ominos gamepiece 5-5-5 by daveboschma
... i filled with correction fluid to make them white.
printed upside down, with raft to make it not curl up on the sharp corners...
thingiverse
free
2"5 or 3"5 to 5"25 adapter by Claymore
...ndard specifications.
the source file is an openscad file avalaible on github
in order to execute it you need these prerequisited
thingiverse
free
5
... the chonkster_yt mystery started on the place where its ending. congratulations. you will find me at roblox: 958 578 774 224 000
thingiverse
free
![[5]cycloparaphenylene](/t/4912483.jpg)
[5]cycloparaphenylene
...[5]cycloparaphenylene
thingiverse
this model is a licorice representation of the molecule [5]cycloparaphenylene.
thingiverse
free
Ender-5
...ngiverse
3d model of ender-5.
attention: there are some changes in later versions on ender-5, so use this 3d model with caution.
thingiverse
free
Werkzeugleiste 5 / Toolbar 5 by CBiker
...werkzeugleiste 5 / toolbar 5 by cbiker
thingiverse
werkzeughalter fuer kugelschreiber und marker.
thingiverse
free
5 + 5 Cart holder for GBA and DS by Adrien5567
...5 + 5 cart holder for gba and ds by adrien5567
thingiverse
5 + 5 cart holder for gba and ds
thingiverse
free
Mookie 5 Session 5 mount by MykoB
...ount by mykob
thingiverse
session 5 mount for my frame mookie 5. mount width is 21mm. mount can be set to 20, 30 and 40 degrees.
thingiverse
free
ventilador doble ender 3, 5, 5 pro, 5 plus by johnkiu
...ventilador doble ender 3, 5, 5 pro, 5 plus by johnkiu
thingiverse
https://www.thingiverse.com/thing:4441076