Easy Rain Guage by cdamet23

Last crawled date: 3 years ago

This is an easily printed piece to a simple hygrometer. Materials needed are small storage tubes from Hobby Lobby, hot glue, and this piece. To fully assemble, take the cap off of the storage tube and mark the side every five millimeters. Cut down the base of the storage tube until it is almost flat. Then, fill the small indent in the base with hot glue, fit the tube into the clip, and slide down until it touches the hot glue. To get the hot glue to dry faster, you can fill the tube with water once it is in position.
Materials:
http://www.hobbylobby.com/Beads-Jewelry/Storage-Organization/Organizers/Medium-Clear-Plastic-Storage-Tubes/p/9504