Cults
Easy exchange filament extruder
by Cults
Last crawled date: 6 years, 1 month ago
For a new printer I needed an extruder setup.
Because I print with ABS a lot this one is designed to do just that (but it also works with other filaments).
With ABS printing you do not want to have airflow passing the printed parts.
Therefor the air is inhaled from above. Then passed through to the Hot-end and then back out at the top. The same airflow construction is also made for de motor. This way the printed part never gets cooled by these 2 fans. For the dimensions of these snail house fans, see picture.
Also I wanted an extruder on which changing filament is easy. On most extruders you can’t see the filament wire and that can make it hard to change filament. If you run out of filament due the print, you are in big trouble. Therefor I made this one in such a way that you can always see the filament wire.
Because I have 3 different sizes of Filament (1.75mm, 2.85mm & 3mm) this extruder can use them all.
To do this I have made an exchangeable filament wire gide. For the 1.75 mm filament I also need to put in a Teflon tube because the hot-end is made for 3mm wire. (I can recommend the Teflon tube anyways because the filament go’s in much smoother). The filament gide is also adjustable so you can gide you filament perfectly. In the photos you do not see this gide because that is still the proto type. On that model the 3mm gide is fixed to the body. Not so smart, because you can’t adjust anything anymore. Also I broke it :-) . As a lose part you can just print it out again. The gide is mounted using a washer, M3 nut and 10mm bolt.
The little filament driver (11mm diameter) is mounted on an M8x50mm bolt I had lying around. On the lathe I turned the end of this M8 bolt down to 5mm so the driver can be mounted on it. See pictures.
The Hot-end is a cheap Chinese one I do not even know the name of, but it works very good. For the dimensions of this Hot-end see pictures.
The stepper motor is a Nema 17 x 47mm. I recommend a strong motor for this if you want to use 2.85 & 3mm filament wire. In the picture you see a 42BYGHW811, but I use an SL42S247A at the moment (a bit more torque). As a driver I still use an A9844 with heavy cooling and heat sink.
For the main body I had to add support material. See picture about the removal of the support material. All other parts can be printed without support. I have printed all parts in PET-G 0.2mm resolution and a 0.4 nozzle
You also need:
3x bearing 608z
1x 11mm driver
1X M8 x 50mm bolt or something similar
1x hot-end
2x snail house fan
1X spring (optional, depending on filament material)
1X nema 17 stepper
1x kapton tape
12X M3 nut
4X M3 x6mm bolt
9X M3 x 10 mm bolt
3X M3 x20mm bolt
9X M3 washer (optional)
1X M3 big washer for filament gide
8X M4 nut
5X M4 x20mm bolt
1X M4 x40mm bolt
5X M4 washer (optional)
After assembly it is wise to put katon tape on the bottom to protect the plastic from all the heat.
This way the plastic holds longer
Because I print with ABS a lot this one is designed to do just that (but it also works with other filaments).
With ABS printing you do not want to have airflow passing the printed parts.
Therefor the air is inhaled from above. Then passed through to the Hot-end and then back out at the top. The same airflow construction is also made for de motor. This way the printed part never gets cooled by these 2 fans. For the dimensions of these snail house fans, see picture.
Also I wanted an extruder on which changing filament is easy. On most extruders you can’t see the filament wire and that can make it hard to change filament. If you run out of filament due the print, you are in big trouble. Therefor I made this one in such a way that you can always see the filament wire.
Because I have 3 different sizes of Filament (1.75mm, 2.85mm & 3mm) this extruder can use them all.
To do this I have made an exchangeable filament wire gide. For the 1.75 mm filament I also need to put in a Teflon tube because the hot-end is made for 3mm wire. (I can recommend the Teflon tube anyways because the filament go’s in much smoother). The filament gide is also adjustable so you can gide you filament perfectly. In the photos you do not see this gide because that is still the proto type. On that model the 3mm gide is fixed to the body. Not so smart, because you can’t adjust anything anymore. Also I broke it :-) . As a lose part you can just print it out again. The gide is mounted using a washer, M3 nut and 10mm bolt.
The little filament driver (11mm diameter) is mounted on an M8x50mm bolt I had lying around. On the lathe I turned the end of this M8 bolt down to 5mm so the driver can be mounted on it. See pictures.
The Hot-end is a cheap Chinese one I do not even know the name of, but it works very good. For the dimensions of this Hot-end see pictures.
The stepper motor is a Nema 17 x 47mm. I recommend a strong motor for this if you want to use 2.85 & 3mm filament wire. In the picture you see a 42BYGHW811, but I use an SL42S247A at the moment (a bit more torque). As a driver I still use an A9844 with heavy cooling and heat sink.
For the main body I had to add support material. See picture about the removal of the support material. All other parts can be printed without support. I have printed all parts in PET-G 0.2mm resolution and a 0.4 nozzle
You also need:
3x bearing 608z
1x 11mm driver
1X M8 x 50mm bolt or something similar
1x hot-end
2x snail house fan
1X spring (optional, depending on filament material)
1X nema 17 stepper
1x kapton tape
12X M3 nut
4X M3 x6mm bolt
9X M3 x 10 mm bolt
3X M3 x20mm bolt
9X M3 washer (optional)
1X M3 big washer for filament gide
8X M4 nut
5X M4 x20mm bolt
1X M4 x40mm bolt
5X M4 washer (optional)
After assembly it is wise to put katon tape on the bottom to protect the plastic from all the heat.
This way the plastic holds longer
Similar models
cults
free
Geared Extruder 2
...s
1x m8 bolt for the driver gear. see picture for the dimensions
1x filament driver gear
3x bearing 608z
1x nema 17 stepper motor
cults
free
BIG DIY 3D Printer
...11mm driver 1x m8 x 50mm bolt or something similar 1x hot-end 2x snail house fan 1x spring (optional,...
cults
free
Geared Extruder
... . for 2,85mm & 3mm filament the holes need to bored out to the correct size.
if you have any questions feel free to ask
cults
free
Hot End mod 3 Anet A6
...he extruder is not depicted. also 2 m3x 20mm bolts that mount into the stepper motor is not shown…. time is a killer i guess :-)
cults
free
Hot End repair holder
...o need 2x m3x10mm and nuts. if you use the little bracket to hold the arduino in place, you also need a little “wood like” screw.
cults
free
Mini-Valve for easy tightening guidler on a Greg's Wade extruder (Allen-hex-bolts cap)
...x filament-jam, i decided to do this little helper, so i could easy screw\unscrew bolts with my bare hands.
fits to any m3 bolt.
cults
free
DIY SUITCASE PARTS
...t screen of cura.
if you think i have missed a part that’s necessary, please let me know. :-)
printed in pet-g resolution 0.2mm
cults
free
Toilet Roll Storage Cloud
...closed edges. if you manage to print one all the way to completion please upload i would love to see it! :-)
thanks for looking!
cults
free
Bearing Mechanism Lamp
...ot, for the file size would be to big.
i have also included a lot of pictures if you do not wish to download the video and files
cults
free
Nema 17 Universal Motor Cooler
... are 2 nema17 motor sizes: see picture
the snail house fan works in opposite direction :-) that was easier :-)
printed in pet-g
85Mm
cults
free
Viking Warrior
...made in 3dstudio max and mudbox. model is approx. 85mm high....
cults
free
Oval Button Box
...no cutouts. the overall size is 120mm wide by 85mm deep by about 85mm tall. each version is packaged...
cults
free
Container with Secret Bill Pocket
...for my nephew. no supports needed. max bill size: 85mm x...
cults
$1
ZOO entry for children
...provided for this purpose. the overhang measures 230mm wide, 85mm high and 40mm deep. the pillar measures 40mm wide,...
cults
free
Geometric planters v2
...suitable for plants with a maximum upper width of 85mm the plant itself can be 70mm long. the model...
cults
free
ThriftStore Angel--Digitized!! Resculpt
...version and a small one, about 3 1/4" or 85mm and a small one with a torus meant as...
cults
free
BIG DIY 3D Printer
...1x end switch 16x m8 bolt or threaded rod 85mm and nuts 2x spindle 8mm and spindle nut or...
cults
$10
Hot Rod
...75mm by 14mm wide ( white wall) rear wheel dia.85mm by 19mm wide (white wall) if you decide to...
Exchange
cults
free
Celtic Love Knot Pendant
...interlaced knots. lovers exchanged these knots just as couples exchange rings these...
cults
$12
Amoeba Handguard for Am-013, 014 & 015
...hardball paintball rail pickatinney amoeba handguard, that can be exchange with the original. fits over the upper. and will...
cults
free
iPhone 6, 6S and 6+ wall dock
...it the ability to slide on and off in exchange with other wall cleat products. an easy solution to...
cults
free
Speedy Red Midi Wing
...have to glue anything. this way you can allways exchange a part if necessary. yet i had no chance...
cults
free
Propane Tank Valve Wrench
...of grilling and where i live everything is tank exchange. you get an inspected tank every time, which is...
cults
free
Starfish Charm! (I.e.
...are three different models of stars and you can exchange them! visit our page for more bookmarks and super...
cults
free
Day 25: The friction sled
...mountains they lacked from the beginning of winter; in exchange reindeer undertook to accompany santa in all his gifts...
cults
free
Day 20: The tree snowflake
...regions of lapland. the angel then explained that in exchange for the winter, 8 reindeer were present here some...
cults
free
Filament Sensor Case & Setup Info/Settings
...used immediately after print interrupt before move to filament exchange position #define filament_change_unload_feedrate 10 // unload filament feedrate in...
75Mm
cults
free
75mm bowl tripod-head lock handle
...5mm pitch), typical of tripods like libec (on which it was modeled) etc...
the hole in the centre of the washer is 13mm diameter.
cults
$1
Tripod 65mm to 75mm bowl adapter/spacer
... head (a print for a test part is included).
(successful pairings: the th-650 head and vinten 75mm legs via only the v2 spacer).
cults
free
smartphone support
...smartphone holder that can accommodate a phone up to 75mm wide and up to 12mm...
cults
free
Clip bag 75 and 95mm
...you to close a bag. the clamping plate is 75mm the profile is openwork. this drawing is to be...
cults
$1
doorknob for furniture France
...plastic insert (d: 8 mm) france in a 75mm x75mm thickness 5 mm, 30 mm button...
cults
$1
Keyholder - Key Holder
...for about 6 keys with a max length of 75mm end ring to put the car key use a...
cults
free
Multifunction phone stand
...(l / w / h) 105x60x50mm maximum phone width: 75mm max thickness:...
cults
free
DRESSING / REINFORCING of chair
...... you need 2 screws per corner reinforcement. x: 75mm y: 75mm z: 25mm for the folder version 4...
cults
$2
Morty Cookie Cutter
...designed for the manufacture of cookies. height: 90mm width: 75mm cutting height: 20mm great design to cut the funniest...
cults
free
Sail Boat
...so it will last. printed with inland natural pla: https://www.amazon.com/inland-1-75mmnatural-printer-filament/dp/b00ysp5sr8/ref=sr_1_1?s=industrial&ie=utf8&qid=1501210959&sr=1-1&keywords=inland+natural+pla ...
Snail
cults
free
Snail
...snail
cults
snail
snail
cults
$1
Snails
... of the shell.
ideal for a study of image or design, or for a children's room or simply as a different and daring decoration.
cults
$1
Gary the snail
...gary the snail
cults
gary snail toy sponge bob patrick slug
gary the snail
cults
free
Shell of snail Planorbarius
...shell of snail planorbarius
cults
shell of snail planorbarius
shell of snail planorbarius
cults
$4
Snail Vase
...snail vase
cults
modeled in 3ds max and ready to print inspired decorative glass snail shape
cults
free
Snail (Gary The Snail from SpongeBob)
...a!
youtube: https://goo.gl/x6y32e
facebook: https://goo.gl/zaqjxj
instagram: https://goo.gl/jlfltf
twitter: https://goo.gl/eiaecg
cults
free
Boa Hancock's snail cellphone
...boa hancock's snail cellphone
cults
hancock's snail cellphone boa
boa hancock's snail cellphone
cults
free
One Piece snail phone stand
...one piece snail phone stand
cults
one piece snail phone stand
one piece snail phone stand
cults
free
one piece joker's snail cellphone
...one piece joker's snail cellphone
cults
one piece joker's snail cellphone
one piece joker's snail cellphone
cults
free
Snail Mail Van
....
the steering wheel is supposed to look like a slice of orange or similar citrus, and the truck is driven by an ant postman xd
Hotend
cults
free
Hotend setup for custom router
... at first, but perhaps other people can still use it due the maney customizers and self builders i have seen on the internet :-)
cults
free
Anet A6 J-Hotend mod
...e hotend wil come to sit. you can break this cylinder out after the print is ready, this cylinder is for support while printing.
cults
$2
3d cartoons printer nozzle
...3d cartoons printer nozzle cults cartoon buzzard hotend 3d printer figurine art toy toy hotend / cartoon...
cults
free
HELLBOY MASK FILAFLEX
...are in beta testing of our new extruder and hotend that coming out !! print specs. nozzle: 1mm layer...
cults
free
WOLVERINE MASK FILAFLEX SKIN TONE
...are in beta testing of our new extruder and hotend that coming out !! print specs. nozzle: 1mm layer...
cults
free
Led holder for 30mm fan
...for 30mm fan cults 30mm 30mm_fan 30mm_fan_mount fan holder hotend led led_holder led_mount led_strip tevo tevo_3d_printer tevo_tarantula i wanted...
cults
free
Wonder Woman Ginble KeyChain
...the 3 files in case you use a color hotend ...
cults
free
3 colors Anatomical Heart
...vessels 、arteries、veins print it in three color with diamond hotend using simplify3d to slice ,with ooze shield for color...
cults
free
Micro Glider
...another reach goal, dual extrusion with bowden extruder recreus hotend and mixing filaflex and pla in the same print....
cults
free
Makerbot Replicator mini and 2X silicone insulation
...these are silicone molds for a heavy duty improved hotend insulation, i'll post pics as soon as the silicone...
J
cults
$1
I said with letter J
...i said with letter j
cults
said letter j
dimensions 30mm x 40mm x 3mm.
cults
$6
Drone Searcher MK2 J
...for display on desktop.
i have also included the .stl file of the entire aircraft, so you can divided in other ways if you like.
cults
free
Anet A6 J-Hotend mod
...e hotend wil come to sit. you can break this cylinder out after the print is ready, this cylinder is for support while printing.
cults
free
Hans J Wegner WISHBONE CHAIR (Y CHAIR)
...ken.
after these trouble, i am satisfied with this wishbone chair that i made.
thank you for your understanding my poor english!
cults
free
Touch
...touch cults j ...
cults
free
Gemmes
...besoin de gemmes particulière pour la réalisation d'un costume, j#39;ai donc modélisé mes gemmes sur c4d et les ai...
cults
free
Long incense holder
...classique et comme j'avais un échantillon de pla bois j#39;ai essayer c'est pas mal non plus ça donne un...
cults
free
Shell Chair
...wegner design the original shell chair by designer hans j wegner at a 1:10 scale. the chair seat and...
cults
free
Ball bearing
...ball bearing cults reprap rolling ball j#39;ai commandé des grosses bobines de pla sur reprap, le...
cults
free
Arduino numeric keypad
...arduino numeric keypad cults keyboard keypad arduino arduino nano j#39;ai réalisé ce boitier pour y intégrer un clavier numérique...
608
cults
free
608's spinner
...608's spinner
cults
608's spinner
608's spinner
cults
free
608 Bearing Tri Spinner
...ners spinning
608 bearing tri fidgit spinner
this is our free bearing spinner that takes 4 8x22x7mm (608) standard size bearings
cults
free
Pulley With 608 bearings
...e of gravity along with friction. this also helps to give a firm understanding on how the pulley helped innovate society. enjoy!
cults
$1
HAND SPINNER BEARING bearing 608
...hand spinner bearing bearing 608
cults
hand spinner design phoenix
model without bearings
608 22 mm epr 7mm
cults
free
Customizable Fidget Spinner 608 Bearing Caps
...customizable fidget spinner 608 bearing caps
customize:
debossed text
embossed text
ready to print:
cat
star
heart
yin-yang
paw
cults
$1
HAND SPINNER BEARING BALL 608 BALL
...ner toy
bearing
with operating game
08-22-07 mm
large balls
inside diameter 8 mm x
outer diameter 22 mm x
height 7 mm
cordially
cults
free
608 fidget dual colour Spiral Spinner
...r for dual colour printers.
a nice mesmerising spiral pattern.
we've used a black pla & a glow in the dark filament
cults
free
Bearing holder 608 ZZ (d8 x D22 x h7)
... the holder through the opening located below.
dimensions and other parts available on:
http://www.genapart.com/blog/ressources/
cults
free
Spinner
...spinner cults standart 608 bearing. rollers 3x23.8mm - 8pcs balls 4.67mm -...
cults
free
Hand spinning around
...in the shape of a wheel with a bearing 608 ...
3Mm
cults
free
Plywood Box Joint (3mm thick)
...plywood box joint (3mm thick)
cults
plywood box joint (3mm thick)
plywood box joint (3mm thick)
cults
free
18mm diameter impeller for 3mm shaft
...t a slow speed and use cooling for best quality.
also useful as a small benchmark print to test for fine details and overhangs.
cults
free
BOX HEAD DIRECT DRIVE 3MM BY DAMAJU
...ble with your head for filament 1.75 mm or order the box with a head 3mm.
you also want to sell your box? tell us box@dagoma.fr.
cults
free
Fixing bracket
...fixing bracket cults fixing bracket 5mm and 3mm ...
cults
$1
Fitness keychain
...keychain cults keychain fitness dimension 70 × 32 × 3mm ...
cults
free
Olympic Rings - Desk Plaque
...olympic rings - desk plaque cults five 3mm diameter rings with...
cults
free
Olympic Rings - Wall Plaque
...olympic rings - wall plaque cults five 3mm diameter rings suitable for wall...
cults
$1
I said with letter O
...cults said letter or dimensions 30mm x 40mm x 3mm ...
cults
$1
I said with letter E
...cults said letter and dimensions 30mm x 40mm x 3mm ...
cults
$1
I said with letter M
...cults said letter m dimensions 30mm x 40mm x 3mm ...
China
cults
free
Zheng3 China Puzzle
...zheng3 china puzzle
cults
zheng3 china puzzle
zheng3 china puzzle
cults
free
Chinese guardian lion on stone drum
...3d printable zbrush mold anti-evil stl format.model of ancient china follow me,you will get more free and cheap models....
cults
$1
nine dragon ball from stronghero3d
...with one ball it is a fine art from china ...
cults
free
ELECTROVALVULA STRAINER
...electrovalvula strainer cults support electrovalve laundry trolley electrovalvula clamp (china composed of two parts that are printed...
cults
free
sail
...cults scenery scene scape sail jade jewelry asia asian china decorative decoration artistic 3d wall...
cults
free
Mythical Wild Animal Pixiu
...mythical wild animal pixiu cults oriental china traditional animal mythical cnc relief woodcarving stl format,mythical...
cults
free
dragon pendant
...dragon pendant cults dragon oriental china pendant jewelry bas-relief decoration stl format,3d model of dragon...
cults
$12
the Tiger Pendant
...the tiger pendant cults in china the tiger is considered the king of all beasts...
cults
free
Mythical Wild Animal Pixiu2
...mythical wild animal pixiu2 cults aniaml china japan traditional engraving sculpture cnc relief stl format ,mythical...
cults
free
dragon
...dragon cults dragon animal stamp seal oriental china chinese 3d cnc printable decoration stl format.model for 3d...
Universal
cults
free
Universal Hanger
...universal hanger
cults
universal hanger
universal hanger
cults
free
Universal Cable Organizer
...universal cable organizer
cults
universal cable organizer
universal cable organizer
cults
free
Universal Handy Stand
...universal handy stand
cults
universal handy stand
universal handy stand
cults
free
University Buildings Plan
...university buildings plan
cults
university buildings plan
university buildings plan
cults
free
Universal Curator, 28mm Miniature
...universal curator, 28mm miniature
cults
universal curator 28mm miniature
universal curator, 28mm miniature
cults
free
Universal Spiral Spool Holder
...universal spiral spool holder
cults
universal spiral spool holder
universal spiral spool holder
cults
$1
universal smartphone support
...universal smartphone support
cults
smarphone shell phone support apple android
universal smartphone support for all smartphones.
cults
free
Universal tablet support
...universal tablet support
cults
support tablet universal
support for android or apple tablet, 8 "to 12" normally.
cults
free
Universal Cam Holder Arm
...universal cam holder arm
cults
camera holder
universal webcam holder arm.
cults
$6
Support smartphone / tablet Universal
...support smartphone / tablet universal
cults
support universal smartphone that will fit for most smartphones or tablets.
Extruder
cults
free
TinTin rocket for single extruder
...tintin rocket for single extruder
cults
tintin rocket for single extruder
tintin rocket for single extruder
cults
free
D20 dice for dual extruders
...d20 dice for dual extruders
cults
d20 dice for dual extruders
d20 dice for dual extruders
cults
free
TAZ 4 1.75mm Extruder Mount
...taz 4 1.75mm extruder mount
cults
taz 4 1.75mm extruder mount
taz 4 1.75mm extruder mount
cults
free
Jack the Pumpkin King Dual Extrude
...jack the pumpkin king dual extrude
cults
jack the pumpkin king dual extrude
jack the pumpkin king dual extrude
cults
free
NHL Stanley Cup - Dual Extruder
...nhl stanley cup - dual extruder
cults
stanley cup
sliced in meshmixer for dual extruder print.
cults
free
Afinia H-Series Printer Extruder Housing
...afinia h-series printer extruder housing
cults
afinia h-series printer extruder housing
afinia h-series printer extruder housing
cults
free
Bowden extruder flex filament - dagoma discovery200
...dagoma discovery200
cults
bowden extruder flex filament - dagoma discovery200
bowden extruder flex filament - dagoma discovery200
cults
free
Printrbot Metal extruder fan cover/mount
...printrbot metal extruder fan cover/mount
cults
printrbot metal extruder fan cover/mount
printrbot metal extruder fan cover/mount
cults
free
Geared Extruder
... . for 2,85mm & 3mm filament the holes need to bored out to the correct size.
if you have any questions feel free to ask
cults
free
Makergear M2 Single V4 Extruder Fan Shroud
...gear m2 single v4 extruder fan shroud
cults
makergear m2 single v4 extruder fan shroud
makergear m2 single v4 extruder fan shroud
Geared
cults
$1
gearing
...gearing
cults
gearing in
gearing
cults
$4
Bangle Gear
...racelet gearing jewel gift printable bangle gear
an incredible 6 gears bangle, gear is rotating.
printing 6 time gear and nails.
cults
free
Simplicity Gears
...simplicity gears
cults
simplicity gears
simplicity gears
cults
free
Geared Spinner
...geared spinner
cults
geared spinner
geared spinner
cults
free
Gear spinner
...gear spinner
cults
gear spinner
gear spinner
cults
free
Landing Gear
...landing gear
cults
landing gear
landing gear
cults
free
Gear Glass
...gear glass
cults
gear glass
gear glass
cults
$2
imitation wood gear (imitation wood gear)
...imitation wood gear (imitation wood gear)
cults
gear from wood (gear of wood)
imitation wood gear (imitation wood gear)
cults
free
Helical Gear
...lical_gears part thing
helical gear. the radius of the gear is 200mm, scale to desired size. i suggest printing without supports.
cults
$5
gear 38 teeth (gear 38 teeth)
...gear 38 teeth (gear 38 teeth)
cults
gear 38 teeth (gear teeth)
gear 38 teeth varied uses
gear 38 teeth varied uses
Fan
cults
free
fan
...fan
cults
fan
fan
cults
free
Fan
...fan
cults
fan
fan
cults
free
Fan
...fan
cults
fan
fan
cults
$6
Fan
...med weapon blades video games
fan is a weapon inspired by a famous video game.
fan is a weapon inspired by a famous video games.
cults
free
Fan for repairing a 40x10mm computer fan.
...n for repairing a 40x10mm computer fan.
cults
fan for repairing a 40x10mm computer fan.
fan for repairing a 40x10mm computer fan.
cults
free
Fan for summer
...fan for summer
cults
fan summer for
fan for summer
cults
$10
Min fan
...min fan
cults
wind turbine fan mini fan
small fan that can be used for wind or other projects
cults
free
Fan support
...fan support
cults
prusa i3
x-axis fan support prusa i3
fan size 40 × 40
cults
free
Ball Fan
... fan’, and 11+’s usb-powered ‘o-fan’.
http://www.infmetry.com/products/u-like-usb-desktop-fan
http://elevenpl.us/product/o-fan/
cults
$2
50mm Fan Cover
...ter computer fan case fan grill grille classic
a classic yet unique fan cover for a 50mm fan brought to you by twisted tiger labs
Abs
cults
free
Bottle and Screw Cap 45 AB
...bottle and screw cap 45 ab
cults
bottle and screw cap 45 ab
bottle and screw cap 45 ab
cults
free
Fidget Spinner ABS
...dget spinner spinners fidgets fun simple simpleprint toy toys
this is a simple fidget spinner. this is optimized for abs. enjoy!
cults
free
Gear Fidget Spinner (ABS)
...pink purple red time toy toys twiddle yellow
this is a basic fidget spinner. uses basic skate board bearing.
optimized for abs *
cults
free
Fidget Spinner ( ABS )
...get green orange purple red simple white
this is a basic single bearing fidget spinner i have created. enjoy! optimized for abs!
cults
free
Fidget Spinner ( ABS )
... the file is optimized for abs so when it shrinks the bearing will still fit. might work with pla, but the holes will be too big.
cults
free
The Dark Knight Rises Batman Abs Plates
...dark-knight-rises-batman-cowl
if you like my work please support me on my patreon page :
https://www.patreon.com/user?u=4430621
cults
free
Ferris Wheel
...bearings. printed on zortrax m200 3d printer. filament: red z-abs green z-abs yellow z-abs orange z-abs blue z-abs pure...
cults
free
Tablet mounts
...tablet mounts cults support tablet abs support practical for shelf shelf, made of...
cults
$1
iPhone 6/6S Case Articuno (pokemon) for PLA,ABS material
...9;t cut your finger in a long-term use).
in case of big interest we will also make zapdos (team yellow) and moltres (team red).
cults
$1
Biohazard Ashtray
...biohazard ashtray cults abs ...
House
cults
free
House
...house
cults
house
house
cults
$2
Organic house
...organic house
cults
house
a living and moving house.
cults
free
Viking House
...viking house
cults
viking house
viking house
cults
free
Monopoly house
...monopoly house
cults
monopoly house
monopoly house
cults
free
Garden house.
...garden house.
cults
garden house.
garden house.
cults
free
House Spider
...house spider
cults
house spider
house spider
cults
free
princess house
...princess house
cults
home house princess
princess house.
no need support.
cults
free
Keychain House
...keychain house
cults
keychain house
keychain house with revolutionary and innovative design
cults
free
Gingerbread house
...gingerbread house
cults
gingerbread house
a detailed 3d model of a colourful gingerbread house.
cults
$6
House
...house
cults
house pendant nature
2cm x 1.7cm x 0.1cm
volume: 0.28ml
gold weight 18k: 4.5gr
Filament
cults
free
Filament clip / Universal filament clip
...t clip
cults
pliers filament clip universal
here is a new model of filament clip, finally there it would be more a filament clamp
cults
free
filament joiner
...filament joiner
cults
filament joiner
filament joiner
cults
free
Guide filament
...
cults
filament prusa i3
compatible with the filament holder, it allows to guide the filament in order to facilitate the printing
cults
$1
Filament keepers
...t keeper
a set of 5 filament keepers got 1 with a spool of filament and made these in sketchup since i needed a gob more of them
cults
free
Filament Door
...filament door
cults
door filament
filament holder for geeetech prusa i3.
m8 threaded rod to secure the whole
cults
$1
Spool on the filament
...spool on the filament
cults
spool filament
design in catia v5
cults
free
Filament Duck - filament spool stand (94/64mm)
... duck - filament spool stand (94/64mm)
cults
filament duck - spool stand (94/64mm)
filament duck - filament spool stand (94/64mm)
cults
free
Filament clip
...in addition, when you take the reel out of the printer, just pass the filament in one of the holes, and it no longer takes place.
cults
free
Filament holder
... one to fit all the different sizes of filament spools.
it’s very fast and easy to change the filament. :-)
printed in white abs
cults
free
Filament Clip, Filament Holder, Filament Keeper
... the same clip but with a smaller opening so that it will tightly fit on spools with thinner sidewalls. let me know how it works.
Easy
cults
free
Easy Breasy
...easy breasy
cults
easy breasy
easy breasy
cults
free
Bow easy to print
...bow easy to print
cults
bow easy to print
bow easy to print
cults
free
Easy to print Concept Aircraft
...easy to print concept aircraft
cults
easy to print concept aircraft
easy to print concept aircraft
cults
free
Diglett [Pokemon] - Easy to Print
...diglett [pokemon] - easy to print
cults
diglett [pokemon] - easy to print
diglett [pokemon] - easy to print
cults
free
Disco Easy 200 Spool Support
...filament disco easy 200
support for 1kg coil but suitable for all sizes of coils below 80mm wide.
for dagoma disco easy 200.
cults
free
Easy keychain
...thebox.com/practical-first-key-clip-hooks-to-multifunctional-tool-open-wine-universal-combination-tool_p2844463.html?currency=usd
cults
free
Chocobo (7 easy parts)
...he feathers, so i decided to cut the model in 7 easy to print parts.
i hope it will be easier for everyone to print this now :p
cults
free
Easy to print Generic Excavator (esc: 1:100)
...nt generic excavator (esc: 1:100)
cults
easy to print generic excavator (esc: 1:100)
easy to print generic excavator (esc: 1:100)
cults
free
Easy to print Generic Bulldozer (esc: 1:100)
...t generic bulldozer (esc: 1:100)
cults
easy to print generic bulldozer (esc: 1:100)
easy to print generic bulldozer (esc: 1:100)
cults
free
Easy to print Inductrix Quadcopter Frame
...ad frame. heavier than original frame, but pretty robust as well.
normal frame file for 0.5 nozzle, thin file is for 0.4 nozzle.
Sizes
cults
free
Green pearl ring (size 5)
...green pearl ring (size 5)
cults
green pearl ring (size 5)
green pearl ring (size 5)
cults
free
Puzzle gift boxes in various sizes
...ludes a box designed to take a £20 (as pictured) and a box designed to take a stack of £1 coins, plus various other sizes of box.
cults
$1
Superman Ring (sizes US 6 - 12)
...g to this ring size chart but these have not been tested.
the smaller sizes may pose a tricky print as with anything small/thin.
cults
$2
Batman Rings (sizes US 6 - 12)
...g to this ring size chart but these have not been tested.
the smaller sizes may pose a tricky print as with anything small/thin.
cults
$8
Pumpkin cookie cutter - size 10cm
...e cutter design for cookies cutting.
size of wall for cutting 0,8mm.
nozzle for printing 0,4mm
printing time app. 1hour 15minuts.
cults
free
Sub Zero Mask - Full Size. Mortal Kombat
...sub zero mask - full size. mortal kombat
cults
sub zero mask - full size. mortal kombat
sub zero mask - full size. mortal kombat
cults
free
140 Sized Quadcopter - By 3DEX
... control board.
please check out www.3dexfilament.co.uk for more information about us and how we can help you with 3d printing.
cults
free
CalorieMate Case (half size)
...dded "minimal" version (must remove paper box), and modified door's "barbs" height 0.4mm -> 0.6mm.
cults
free
base large size (4 squares, or 10 feet)
... base role pathfinder dyd mini
a base of pathfinder to have minis as big size, with this base you can stage the enlarge person: p
cults
free
Full Sized Halo Plasma Pistol
...d up the details with acrylic paint.
print settings:
layer height: 0.3mm
infill: 20%
print time: ~34 hours
filament used: ~0.6kg
1
cults
free
Bracelet No 1
...bracelet no 1
cults
bracelet no 1
bracelet no 1
cults
free
Hook, +1
...hook, +1
cults
hook +1
hook, +1
cults
free
Pokale 1-3, Winnercup 1 - 3
...pokale 1-3, winnercup 1 - 3
cults
pokale 1-3 winnercup 1 - 3
pokale 1-3, winnercup 1 - 3
cults
free
Super Mario Bros World 1-1
...super mario bros world 1-1
cults
super mario bros world 1-1
super mario bros world 1-1
cults
free
Pythagoras Tree (1:1:Sqrt2)
...ap a little bit. the structure is very easy to design in 123d design using the basic idea of similarity. yes, this is a fractal.
cults
$1
Bowl 1
...bowl 1
cults
bowl household mug bread kitchen go flagon
bowl 1
cults
free
Wind Vase 1
...wind vase 1
cults
wind vase 1
wind vase 1
cults
free
magnet mushroom 1
...magnet mushroom 1
cults
mushroom magnet 1
magnet mushroom 1
cults
free
3D Fabric 1
...3d fabric 1
cults
3d fabric 1
3d fabric 1
cults
free
Pumpkin Vase 1
...pumpkin vase 1
cults
pumpkin vase 1
pumpkin vase 1
2
cults
free
2 Ball 2 Socket Joint
...2 ball 2 socket joint
cults
2 ball socket joint
2 ball 2 socket joint
cults
free
Bracelet No 2
...bracelet no 2
cults
bracelet no 2
bracelet no 2
cults
free
Pendants 2
...pendants 2
cults
pendants 2
pendants 2
cults
free
Trophy 2
...trophy 2
cults
trophy 2
trophy 2
cults
free
Elf 2
...elf 2
cults
elf 2
elf 2
cults
free
Vase_Unicofil-2
...vase_unicofil-2
cults
vase_unicofil-2
vase_unicofil-2
cults
free
SPEyewear 2
...speyewear 2
cults
speyewear 2
speyewear 2
cults
free
Door hanger 2 - Do Not Disturb 2
...door hanger 2 - do not disturb 2
cults
door hanger 2 - do not disturb
door hanger 2 - do not disturb 2
cults
free
Ultimaker 2 and 2+ Filament guide for big spools
...ment guide for big spools
cults
ultimaker 2 and 2+ filament guide for big spools
ultimaker 2 and 2+ filament guide for big spools
cults
free
2 € each
...2 € each
cults
piece
modeling piece of 2 € surs sketchup
All
cults
free
The Settlers of Catan - all pieces
...the settlers of catan - all pieces
cults
the settlers of catan - all pieces
the settlers of catan - all pieces
cults
free
All MotoGP tracks
... motorcycle season moto gp suzuki track vitesse world championship yamaha
all the tracks of a motogp season.
ask me for a design.
cults
free
Tool Stand for all kinds of tools
...tool stand for all kinds of tools
cults
tool stand for all kinds of tools
tool stand for all kinds of tools
cults
free
Converse All Star shoe and logo
...converse all star shoe and logo
cults
converse all star shoe and logo
converse all star shoe and logo
cults
free
All my tabs
...f times a week on that channel.
greetings, have a great time and keep creating kids
https://www.youtube.com/watch?v=oy0nc5x2pdy
cults
$1
All in one for brushing teeth
...hair).
as a bonus two jewelry holders on the duvets!
all with a nice design: arms and hands are articulated.
#dagomerlin
cults
$1
Ratcheting screwdriver for all hex bits, wrench, ...
...x bits, wrench, ...
cults
ratcheting screwdriver for all hex bits wrench ...
ratcheting screwdriver for all hex bits, wrench, ...
cults
$1
All Religions Pendant
...different religions. :) it is a 3d model for 3d printing. download this 3d file and make it with your 3d printer. enjoy!
#pendant
cults
$1
All-Star Basketball Shooting Game
...oop and net. all parts press fit together, no glue required.
makes a great gift, get yours today and start shooting some balls!
cults
$2
My openscad files, with all my objects
...er all my functions to create objects (with the associated examples). the goal is to be able to show new developers how to do it.
Printer
cults
free
pixie printer
... card, to avoid bugs in plain print downloaded the foot and multiply by 6 they can raise your printer for better air circulation.
cults
$4
3D printer miniature
...3d printer miniature
cults
miniature printer 3d
give a model 3d printer to your jealous friends!
cults
$2
Printer feeder key
...printer feeder key
cults
3d printer ptfe feeder
ptfe hose clamp on the feeder.
cults
$1
Model printer 3d
...model printer 3d
cults
discover the field of 3d printing thanks to this model printer 3d
cults
free
Z-coupler for printer axle
...z-coupler for printer axle
cults
z-coupler for printer axle
z-coupler for printer axle
cults
free
TitanItalyDelta - for WASP 3D Printers
...titanitalydelta - for wasp 3d printers
cults
titanitalydelta - for wasp 3d printers
titanitalydelta - for wasp 3d printers
cults
free
Money bank of the printer shape
...money bank of the printer shape
cults
money bank of the printer shape
money bank of the printer shape
cults
free
Cardan coupling for 3D printer
...cardan coupling for 3d printer
cults
cardan to replace a flexible (5x8) 3d printer coupler
cults
$1
delta printer rod tensor
...
it requires little material, without losing strength.
avoid layer jumps by vibration of the arms achieving smoother impressions.
cults
$1
delta printer rod tensor
...
it requires little material, without losing strength.
avoid layer jumps by vibration of the arms achieving smoother impressions.
Parts
cults
free
part for grinder
...part for grinder
cults
part for grinder
part for grinder
cults
free
Motorcycle parts
...motorcycle parts
cults
door bike camping because
parts bike rack camping car, clips + end of bike rail, caliper ....
cults
free
Mudguard Fitting Parts
...mudguard fitting parts
cults
mudguard fitting parts
mudguard fitting parts
cults
free
Small Parts Box
...small parts box
cults
small parts box
small parts box
cults
free
RoboMorphs! (Parts Compendium)
...robomorphs! (parts compendium)
cults
robomorphs! (parts compendium)
robomorphs! (parts compendium)
cults
free
2-part-1
...2-part-1
cults
2-part-1
2-part-1
cults
free
sencha parts tray
...sencha parts tray
cults
sencha parts tray
sencha parts tray
cults
$2
rolling shutter part
...rolling shutter part
cults
blind wheel rolling shutter
replacement part roller shutter
cults
$9
Facets Ring - Part 1
...facets ring - part 1
cults
facets ring - part 1
facets ring - part 1
cults
$6
Facets Ring - Part 2
...facets ring - part 2
cults
facets ring - part 2
facets ring - part 2
One
cults
free
The Ancient One
...the ancient one
cults
the ancient one
the ancient one
cults
free
sunburst one
...sunburst one
cults
sunburst one
sunburst one
cults
$2
Rouge One Keychain
...rouge one keychain
cults
starwars movies rougeone keychains
logo from the movie rouge one
cults
free
One Direction Logo
...one direction logo
cults
art toy
one direction logo bonito, to give to fans of the group ...
cults
free
One Blade Razor Dock
...one blade razor dock
cults
one blade
one blade razor dock
cults
free
Fitbit One Wrist Strap
...fitbit one wrist strap
cults
fitbit one wrist strap
fitbit one wrist strap
cults
free
Wayfarer Tactics: Wave One
...wayfarer tactics: wave one
cults
wayfarer tactics: wave one
wayfarer tactics: wave one
cults
free
One Punch Man
...ecause the blow on the blow ~
also because there is no opponent, every day is decadent-like xd
onepunchman
do you want to punch?
cults
free
Xbox One X stand + joystick
...e x
as the standard one x has no basis for vertical, here is one that adds a unique style and support for an xbox one controller.
cults
free
XBOX ONE Controller Support
...ller
support for 2 xbox one controller
to donate me if you like my content or support me !!!
https://www.paypal.me/valsant
Printing
cults
$1
Domoidalite print
...the geometry than my humble machine could print out. it's still fun to look at the details inside with a flashlight though :p
cults
free
3D Printed Stool
...3d printed stool
cults
3d printed stool
3d printed stool
cults
free
Bow easy to print
...bow easy to print
cults
bow easy to print
bow easy to print
cults
free
3D Printed Clock
...3d printed clock
cults
3d printed clock
3d printed clock
cults
free
Printed Google Cardboard
...printed google cardboard
cults
printed google cardboard
printed google cardboard
cults
free
Cat 3D printed
...cat 3d printed
cults
animals cat toy
cat 3d printed
cults
$1
Matryoshka (print-in-place)
...matryoshka (print-in-place)
cults
the very first matryoshka print-in-place model!!, no needed to separate parts.
enjoy!
cults
$1
halloween 3d model for printing
...model for printing
cults
halloween 3d printing printing 3d design funny party subdivision lowpoly
halloween 3d model for printing
cults
free
3D Printed Light Bulb
...3d printed light bulb
cults
3d printed light bulb
3d printed light bulb
cults
free
3D Printed Unicorn Horn
...3d printed unicorn horn
cults
3d printed unicorn horn
3d printed unicorn horn