Eachine Racer 130 mods by brandonhill

Last crawled date: 3 years ago

3D printable parts to modify your Racer 130. Source files can be found on GitHub.
I did this because initially the stock flight controller died, and I replaced it with one with different mounting holes. Then I wanted to use a 19mm micro cam, switchable video transmitter, UXII antenna and addressable LED strip. You get the picture. All that and a full canopy comes in almost 10g less than stock!
The vented canopy is suitable for most conditions, but the solid canopy mates closely with the baseplate and motor wires and accommodates a polycarbonate (2L pop bottle) windshield for wet weather use (winter, light rain).
Components
Some minor size variations can be accommodated for LED strip, receiver and video transmitter (by updating source files config accordingly and saving new STLs for those mounts).
5.8GHz UXII antenna
EWRF SmartAudio 48ch 0/25/100/200mW video transmitter
FrSky XM+ 16ch micro receiver
20x20 flight controller Nox F4 flight controller
20x20 4 in 1 ESC HakRC 15A
19mm micro cam RunCam Swift Micro 1/3" CCD camera or Caddx Turbo Micro 1/3" CMOS camera
Micro 4x LED strip WS2812B
Male XT30 connector 5 pairs