Eachine Fury Wing adapters and mounts by DiAleksi

Last crawled date: 3 years, 1 month ago

Eachine's Fury Wing is not fully compatible for using with FC. So here is some adapters and mounts to use.
2017-09-14 Update
Finally I have time to assemble and redesign these parts. So in my experience this wing needs all weigh to be on the front to keep right CG. So I'll mount FC and PDB in the front part of the fuselage. For this the nicest version is this fc mount center holes.stl.
For 16x19 motor adapter, there is two version. With 0 and 3 degree angle. I've got an advice to set motor ar around 3 degree angle pointing down. So here it is if you'll need it too.
I use rubber standoff between motor and pla-adapter for softmounting and to prevent melting.
2017-09-16 Update
Added antenna mount plate.stl for mounting vtx and rx antennas. Holes for RX antennas are 3mm and tilted 90 degree to each other. You can use coffee steering pills, cotton buds or such tubes for anenna protection.