Thingiverse
E3D v6 Hotend - 40mm Fan Duct Laminar Flow (Improved airflow) by victornpb
by Thingiverse
Last crawled date: 3 years, 4 months ago
This design should improve extruder cooling by a few degrees, my goal was to make airflow better so I could decrease the extruder fan RPM to make it quieter.
I don't have any accurate way of measuring airflow, so instead I inserted a thermocouple sensor inside the extruder tube and measured the temperature right before the heater block, which should be the hottest point in the neck of the heat-break. Then I set my nozzle temperature to 250ºC which is 15ºC above what I usually print. Then set a stopwatch to 10 minutes so it had time for the temps to settle. And I then I tried a few designs and compared the differences.
I don't have any accurate way of measuring airflow, so instead I inserted a thermocouple sensor inside the extruder tube and measured the temperature right before the heater block, which should be the hottest point in the neck of the heat-break. Then I set my nozzle temperature to 250ºC which is 15ºC above what I usually print. Then set a stopwatch to 10 minutes so it had time for the temps to settle. And I then I tried a few designs and compared the differences.
Similar models
thingiverse
free
Fan Shroud for Prusa i3 Jhead on Greg Wades Extruder by SarwarKhan
...s that when printing with abs my last fan setup affected the prints. with this no airflow affects the prints. huge improvement...
thingiverse
free
50mm Fan Mount for FT-5 Extruder Carriage Set by FourDogs
...giverse
couldn't get the airflow i needed with the box fan, so remixed the mount with a 50mm fan housing for better airflow.
thingiverse
free
Removable Extruder Fan Holder A8 + thermistor possability by Alea
...tor possability by alea
thingiverse
i love this desing but my extruder fan is temperature guided, so i need a thermistor hole :d
thingiverse
free
Based on Prusa MK3 R3 - updated Extruder with 40x40x20mm fan open Idler and improved airflow by OPK
...ir heatcamera
a big big thanks to the official prusa design team for the r3 extruder design and for publishing the design files.
thingiverse
free
Anet A6 50mm extruder fan duct by KozAAAAA
... for 50mm fan which was much quieter. it's my first upgrade part so i would be thankful for any tips for upgrading my design.
thingiverse
free
2015 Sunhokey Prusa i3 extruder heatsink cooling duct by bonmotwang
...d be the first layer. so you need to turn 270 degree on y axis when you do slicing. (to sit the fan mounting surface on the bed).
thingiverse
free
60mm Fan Duct for Standard Prusa Carriage by shaunf
...nd carriage. this is my first thing, so feedback is appreciated.
this thing was made in 123d and thus there is no openscad file.
thingiverse
free
40mm Fan Airflow Director by lukeone
...e
thingiverse
i use it to turn the airflow of my extruder fan away from my heatbed, especially for abs, asa and nylon.
have fun.
thingiverse
free
Flashforge Creator X Active Cooling Fan by 3DWaves
... hasn't reduced my print quality. simply set your second extruder temperature above 50(i have mine set to 60) and print away!
thingiverse
free
Prusa MK2 60mm Noctua Part Cooling Adapter by darelleman
... hold quite securely.
i am currently working on a model that bypasses this part, which should greatly improve the airflow. enjoy!
Victornpb
thingiverse
free
4mm cable holder by victornpb
...4mm cable holder by victornpb
thingiverse
cable holder 4mm inner diameter
thingiverse
free
Graber i3 Tec3d Parts by victornpb
...graber i3 tec3d parts by victornpb
thingiverse
printable parts of the graber i3 printer
thingiverse
free
Projector mount with tilting by victornpb
...ith tilting by victornpb
thingiverse
i designed this mound for my little lg projector. it has a regular camera tripod mount nut.
thingiverse
free
Low Poly Pikachu 500 Triangles by victornpb
...low poly pikachu 500 triangles by victornpb
thingiverse
just a low poly pikachu with 500 triangles
thingiverse
free
Mount for Water pump fountain Pet Bowl by victornpb
...rse
the clamp is designed for a 10mm diameter pipe.
the edge of the bowl is 14.5mm
4 degree outer taper and 7 degree inner taper
thingiverse
free
CAT5 + Power Cable Clip Mount by victornpb
...ernet cat5 cable and a power cord for a router.
dimensions:
screw hole: 4mm dia
large clip: 5~6mm
small clip: 2,4mm parallel cord
thingiverse
free
Side container tray for Graber i3 by victornpb
...t one either side, and it will not take more space than the original frame footprint.
i had to enforced the hooks with superglue.
thingiverse
free
TP-Link C20 Wall Mount by victornpb
... ports facing down, that way i can mount it right next to the ceiling and i can access the power/reset button using a long stick.
thingiverse
free
Cable management clip for Microphone Arm Stand by victornpb
...~4.5mm in diameter.
theres a model for printing 2 at once to save some bed space.
i ended using 6 clips in total, 3 for each arm.
thingiverse
free
Replacement Sleeve for a stable Microphone Arm Stand by victornpb
...ny play, and goes all the way through so it is stable even without the tensioning screw, which helps save space behind your desk.
Laminar
thingiverse
free
Laminar Flow Nozzle by SteamLabs
...er. laminar flow is a concept in fluid dynamics that describes a flow that is uniform and parallel.
https://youtu.be/uinvfsc9etw
free3d
free
Laminar flow cabinet v1
...laminar flow cabinet v1
free3d
laminar flow cabinet v1 printable, low poly model.
thingiverse
free
laminar nozzle by atosys
...laminar nozzle by atosys
thingiverse
scale before print
thingiverse
free
Laminar flow shower head by crazysova
...laminar flow shower head by crazysova
thingiverse
laminar flow shower head 1/2 inch thread
thingiverse
free
Laminar Flow Nozzle For Gardenhose by netpipe
...denhose by netpipe
thingiverse
laminar flow nozzle for gardenhose. i have not printed this but it should print without supports.
thingiverse
free
laminar flow sport car
...laminar flow sport car
thingiverse
model of sport car. for printing big model, you need to cut this model, to parts.
thingiverse
free
Laminar Flow Hovering Hose by caphector
...nough lift to support itself on water pressure alone. i will be testing and re-working this to hopefully produce a fun water toy.
thingiverse
free
Laminar Air Assist Nozzle for K40 Laser Cutter by n0th1n6
...assist nozzle for k40 laser cutter
inspired by the same design that i read from hackaday. forgot the source so i designed my own.
thingiverse
free
Revised laminar flow air assist by jimmyt
...assist by jimmyt
thingiverse
this a remix altered to fit a 21.5 mm laser lens focusing ring, also i reduced the height slightly.
thingiverse
free
Laminar(ish) flow adapter for 1" threaded faucet by alfrenovsky
...ovsky
thingiverse
with this adapter youĺl get a mostly cylindrical flow without splashing.
fits a standard 1" garden faucet
Airflow
turbosquid
$19
Airflow Caracole chair
...odel airflow caracole chair for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1658991)
design_connected
$21
AIRFLOW COLLECTIBLES Sky King Tricycle
...airflow collectibles sky king tricycle
designconnected
airflow collectibles sky king tricycle computer generated 3d model.
3ddd
$1
Вытяжной вентилятор Airflow ICON 15
...t is stylish and unobtrusive, even in the smallest space. the quiet, powerful axial fan has been designed with simplicity in mind
humster3d
$75
3D model of Chrysler Imperial Airflow 1934
... model of chrysler imperial airflow 1934 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$75
3D model of Dodge Airflow Tank Truck 1938
...d model of dodge airflow tank truck 1938 in various file formats. all our 3d models were created maximally close to the original.
3d_export
$10
Fan Blade 3D Model
...mechanical household propeller plastic air wind impeller rotor runner airflow fans turbine fan blade 3d model firdz3d 99449...
3d_export
free
laser air nozzle 43mm spindle adapter
...focus of an engraving and cutting laser. without appropriate airflow the sample may develop defects such as uneven cutting...
3d_export
$15
Bladeless Fan 3D Model
...blade air multiplier breeze blows electric electrical appliance home airflow electronic wind bladeless fan 3d model download .c4d .max...
3d_export
$10
Paper Hand Fan 3D Model
...paper hand fan 3d model 3dexport paper hand fan airflow cooling refreshing folding fold classic vintage held woman accessories...
3d_export
free
cnc 3dp laser nozzle for 2w laser opt lasers
...head. this nozzle can be utilized to direct the airflow from the fan of a cutting and engraving laser...
Hotend
thingiverse
free
hotend by fablab_lueneburg
...hotend by fablab_lueneburg
thingiverse
hotend model
thingiverse
free
Hotend for Graber
...hotend for graber
thingiverse
hotend complement pastes for graber printerhttps://youtu.be/0koxhnsuhdy
thingiverse
free
Hotend adapter by antaviana
...hotend adapter by antaviana
thingiverse
hotend adapter
thingiverse
free
hotend fan by mming1106
...hotend fan by mming1106
thingiverse
hotend fan
thingiverse
free
Hotend schema by ione
...hotend schema by ione
thingiverse
hotend project schema
thingiverse
free
Fabtotum XY Hotend holder for E3D Hotend
...s with integrated supports.
more for the project you can see here: https://kf-designs.com/2019/09/07/fabtotum-printer-conversion/
thingiverse
free
HotEnd Stand by onepointdiy
...tend, when you make your new hotend or repair your j-head or mg-plus hotend.
the hole of 16mm, please adjust using a reamer, etc.
thingiverse
free
fast magnetic hotend changer for Chimera Hotend by Draman
...chimera hotend !
and new basis (the hole from original is to small)
it is a remix form skimmy's fast magnetic hotend changer
thingiverse
free
Hotend Fan Adapter for MicroSwiss All Metal Hotend by jo_schi_man
...
thingiverse
little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).
thingiverse
free
Merlin Hotend by Alejanson
...merlin hotend by alejanson
thingiverse
this is a 1:1 drawing of the classic merlin hotend.
E3D
turbosquid
$23
E3D - Google Home
... 3d model e3d - google home for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1192509)
cg_studio
free
e3d model
...e3d model
cgstudio
- e 3d model, royalty free license available, instant download after purchase.
turbosquid
$2
Syringe C4D (E3D Ready)
...lty free 3d model syringe c4d (e3d ready) for download as c4d on turbosquid: 3d models for games, architecture, videos. (1336720)
turbosquid
$12
Microphone USB E3D and C4D
...ree 3d model microphone usb e3d & c4d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1568216)
turbosquid
$29
E3D - OnePlus 6 Black
...model e3d - oneplus 6 black for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358534)
turbosquid
$29
E3D - Motorola One 2018
...del e3d - motorola one 2018 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358533)
turbosquid
$29
E3D - Disney MagicBands 2
...l e3d - disney magicbands 2 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1355515)
turbosquid
$29
E3D - Samsung Z4 Smartphone
...e3d - samsung z4 smartphone for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1182179)
turbosquid
$23
E3D - Razer Phone model
...del e3d - razer phone model for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1231207)
turbosquid
$23
E3D - Alcatel Idol 5
... model e3d - alcatel idol 5 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1212799)
V6
3d_export
$100
v6 engine
...engine
3dexport
complete v6 engine modeled on solidworks 2017 along with .stl, .sldprt and .sldasm of all th parts and assembly.
3d_export
$10
V6 engine
... the first v6 engines were designed and produced independently by marmon motor car company, deutz gasmotoren fabrik and delahaye.
3d_export
$35
v6 engine
...s a complete model of a v6 engine containing over 400 components. you can contact me for a video of all the components assembling
3d_export
$10
v6 engine
...v6 engine
3dexport
turbosquid
$25
Bed1001-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
Chair2-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
V6.mb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
V6 engine
...rovided in this package is all the parts in sldprt format and assembly in sldasm format. i can also convert the format on demand.
3ddd
$1
Стол V6
...6" в стиле дизельпанк изготовлен из блока двигателя, 4х поршней и 4х шатунов.
столешница изготовлена из стекла толщиной 8мм.
cg_studio
$199
V6 VVTi3d model
...v6 vvti3d model
cgstudio
.3ds - v6 vvti 3d model, royalty free license available, instant download after purchase.
Duct
turbosquid
$19
Duct Set
...d
royalty free 3d model duct set for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1145038)
turbosquid
$10
Duct Tape
...id
royalty free 3d model duct tape for download as ma and ma on turbosquid: 3d models for games, architecture, videos. (1580351)
turbosquid
free
Duct Tape
...
free 3d model duct tape for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1486518)
3d_ocean
$7
Air-duct
... ventilation
high quality industrial air duct ventilation model. created in cinema 4d but comes in various other formats as well.
turbosquid
$20
Air ducts
...lty free 3d model air ducts for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1262476)
3d_export
$10
Supply air duct
...supply air duct
3dexport
supply air duct with two axial fans and hangers
turbosquid
$2
Duct Tape
...e 3d model duct tape for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1473972)
turbosquid
free
Duct Tape
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$3
Duct tape
...polys. includes: cinema 4d project. model in 3 formats (obj, fbx, 3ds). 6 .tga texture maps (albedo, ambient occlusion, diffus...
turbosquid
$40
Ventilation Duct PACK
...tion duct pack for download as ma, obj, fbx, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1287068)
40Mm
turbosquid
$10
40MM Bullet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
40mm Vickers-Terni
... free 3d model 40mm vickers-terni for download as lwo and obj on turbosquid: 3d models for games, architecture, videos. (1260063)
turbosquid
$3
40mm grenade M9XX
...y free 3d model 40mm grenade m9xx for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1408150)
turbosquid
$3
40mm grenade M3XX
...y free 3d model 40mm grenade m3xx for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1408145)
turbosquid
$3
40mm grenade M1XX
...y free 3d model 40mm grenade m1xx for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1408144)
turbosquid
$8
40mm Smith & Wesson
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Free 40mm grenade M433
...e 3d model free 40mm grenade m433 for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1404768)
turbosquid
$98
40mm 6G30 grenade launcher
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Famas G2 M203 40mm.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
40mm Bofors TNT-11606
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Flow
turbosquid
free
Flow(Fluid/Flow)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Flow
...dd
flow , mdf italia , tessile
10 тыс.полигонов
turbosquid
$59
Blood Flow - Capilar flow
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$59
FLOW CHAIR and FLOW SLIM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Flow
...flow
3dexport
Improved
cg_studio
$49
Robot Z300 (improved version)3d model
...o
.3ds .fbx .max .obj - robot z300 (improved version) 3d model, royalty free license available, instant download after purchase.
3d_export
$39
Robot Z300 improved version 3D Model
...fantasy sci-fi robots bot humanoid droid sci fi materials character
robot z300 improved version 3d model alekrazum 55067 3dexport
3d_export
$75
CV-90 Improved
...nnon. export versions are fitted with hägglunds e-series turrets, armed with either a 30 mm mk44 or a 35 mm bushmaster autocannon
turbosquid
$55
(Important textures coming back soon after improvements)Cuboid gazebo bench area
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
COMPLETE AUDI 80-100 SHIFT LEVER REPAIR KIT WITH IMPROVED BUSHING
...dexport
• sleeve - 1 pc. • elastic band - 1 pc. • hinge - 1 pc. audi 100c3 audi 100 c4 audi 80 b3 (checked) audi 80 b4 (checked)
3d_export
$7
REPAIR KIT FOR GEARSHIFT LEVER AUDI 80-100 IMPROVED
...ar of the gum is excluded. - rusk - 1 pc. - elastic band - 1 pc. audi 100c3 audi 100 c4 audi 80 b3 (checked) audi 80 b4 (checked)
3d_export
$30
cup mask machine front section stereo mask manufacturing machine improved version
...ing rack cad outsourcing list. the drawings are mature drawings that have been produced.<br>drawing version solidworks 2018
3d_export
free
oven - forno
...oven - forno
3dexport
gradually i'm trying to improve my 3d.
3d_export
$75
T-55
...nally, but these improvements made the tank more efficient and lethal. the t-55 was officially adopted by the soviet army in 1958
3d_export
$5
civil registration authorities
...civil registration authorities
3dexport
city wedding square. the model can be used for projects, to improve the project, etc.
Fan
3d_export
$5
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
fan
...fan
3dexport
is an ancient fan
3ddd
$1
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)