E3D v6 Cooling Mount by jeh241_makestuff

Last crawled date: 3 years ago

This remix fixes a few issues I had with the version it was mixed from. Mainly, the housing was suppose to be held in place with a zip tie, but I opted to have it so you can use a screw to secure it, which I find much better.
The tabs that were suppose to hold the fan duct in place, I found the clearances too wide, and so you couldn't really tighten things down. That was adjusted on mine so the clearance is much tighter.
Lastly, I integrated the loop for a proximity sensor. I know there's a few addons for the previous version, but I preferred something integrated and pushed a little forward for clearance purposes. Because of it's position, it does get in the way of a secondary fan on the one side, so I removed the tabs completely.
Let me know what you think and any feedback you have, or if there is a particular variation you'd like me to tackle, and if it isn't too much, I'll surely look into it.
Go to the version this was remixed from for the fan duct, as of now there is nothing changed with that. Though, I am thinking of making a variation of the fan duct that is more focused to a specific spot and height adjustable. I might tackle that if interest is shown, or if I decide it's something I need on my own setup.
I'd consider this a release candidate right now. So please, if you come across this and want to give it a go and let me know your experience, please do.
This makes use of a 30mm fan, like the one that comes standard on the E3D v6 hotend.