E3D V6 Bowden carriage DL V1.2 by CrazyD82

Last crawled date: 3 years ago

E3D V6 Bowden carriage.
Designed for maximum accessibility from the front, by placing the fan on the back.
NEW CIRCULAIR FAN DUCT DESIGN -> ONLY WHEN USING BLTOUCH OR NO SENSOR
It will not fit with the Tronxy style cube sensor.
In that case use the other fan duct that is in the package.
NOW WITH ADJUSTABLE BLTOUCH MOUNT
It should fit just fine on an Anet A8 / AM8 or similar.Because the fan is mounted on the back, you might need to tap M4 thread in the back of the bearing blocks. (most of the time these are just blank holes)
Currently i've only included a mount for a tronxy (stock anet) sensor and a BLTouch sensor
For BLTouch sensor, mount the BLTouch adapter to the sensor holder and adjust the height to your liking.
Change these settings in marlin’s configuration.h for the tronxy (stock anet) sensor:
#define X_MIN_POS -13
#define Y_MIN_POS 0
#define X_PROBE_OFFSET_FROM_EXTRUDER -30
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0
#define LEFT_PROBE_BED_POSITION 30
#define RIGHT_PROBE_BED_POSITION 190
#define FRONT_PROBE_BED_POSITION 30
#define BACK_PROBE_BED_POSITION 190
Change these settings in marlin’s configuration.h for the BLTOUCH sensor:
#define X_MIN_POS -13
#define Y_MIN_POS 0
#define X_PROBE_OFFSET_FROM_EXTRUDER -34
#define Y_PROBE_OFFSET_FROM_EXTRUDER -3
#define LEFT_PROBE_BED_POSITION 34
#define RIGHT_PROBE_BED_POSITION 186
#define FRONT_PROBE_BED_POSITION 30
#define BACK_PROBE_BED_POSITION 190
Let me know what you think of it!
Change log
V1.2 (26/04/2018)
Updated part cooling fan duct to circulair design for better flow and much better in printing overhangs and bridging. WILL NOT FIT WHEN USING CUBE SENSOR
V1.1 (12/31/2017)
Updated part cooling fan nozzle to much more efficient design
Added BLTouch mount.
V1.0 (12/07/2017)
Tested all parts
Updated description with correct Marlin settings
No longer work in progress :)
V0.3 (11/28/2017)
Recessed the M4 nut holes on the back of the base plate to allow the M4 screws to be shorter
Moved the mounting holes in the build plate for the belt holder more inward to allow for a bit more material around the hole on the outside.
Added preliminary Bill of Materials
V0.2 (11/26/2017)
Fixed blocked fan duct
Moved entire fan down to make sure it is not hitting the upper cross member of the frame
Redesigned Fan mount & Fan duct
V0.1 (11/25/2017)
Updated Fan duct for better printability
V0.0 (11/25/2017)
Initial Version