E3D V6 adapter for Geeetech I3 Pro B Direct Extruder by Y0UD0NTKN0WME

Last crawled date: 3 years, 3 months ago

THIS IS A WORK IN PROGRESS and although it’s usable some measurements might be slightly off.
After getting tired of the MK8 extruder included with the geeetech I3 Pro B, I decided to change it for a E3D V6 but didn’t want to be a Bowden extrusion type. So I designed this adapter that uses the same extruder carriage.
Parts that you won’t need from the original mounting mechanism: Copper sink.
That’s it the rest you will use it.
Supports only touching build plate
Notice:
1) The screw that was used to hold the handle has been relocated and needs to pass through the top left corner of the fan, support number 2 and the handle. It will just sit there, there is no need to tighten it.
2) You need to put 3 M3 washers before putting the 2 bottom screws of the fan. (In each screw).
3) The “endstop.stl” file is a supplement that you have to put in the top screws that hold the carriage to the sliders. This way it will trigger the end stop earlier so that the fan doesn’t touch the Z axis.
If you have any doubt, just ask me.