Thingiverse
E3D Ultimaker Direct Titan Upgrade by jamesla
by Thingiverse
Last crawled date: 3 years, 1 month ago
THERE IS A NEW VERSION: https://www.thingiverse.com/thing:2749539
Want to add a Direct(ish) Titan Extruder to your Ultimaker 2? Then this is for you! You will need to add a length of PTFE (4mm OD) from the extruder down into the hot end. I would recommend running a 4mm drill through the hole in the Titan fixture.
There are some cable tie mounts for all the electronics as they will not fit through the head anymore.
Important note:
Remember to fit the knurled long bolts BEFORE the motor and the extruder!
23/03/2017 - Version 2 is now live. Support has been added as the extruder was pushing itself up. Printed and tested.
Watch it in action!https://youtu.be/oXtv71BKYUk
Want to add a Direct(ish) Titan Extruder to your Ultimaker 2? Then this is for you! You will need to add a length of PTFE (4mm OD) from the extruder down into the hot end. I would recommend running a 4mm drill through the hole in the Titan fixture.
There are some cable tie mounts for all the electronics as they will not fit through the head anymore.
Important note:
Remember to fit the knurled long bolts BEFORE the motor and the extruder!
23/03/2017 - Version 2 is now live. Support has been added as the extruder was pushing itself up. Printed and tested.
Watch it in action!https://youtu.be/oXtv71BKYUk
Similar models
thingiverse
free
E3D Titan direct drive extruder for Ultimaker 2 by AnthonyB
...den pfte as a feeder line to the extruder.
apart from the titan mount all other parts are per pg35l direct drive extruder design.
thingiverse
free
Direct Drive Extruder Ultimaker 2 Clone by MadCre8
...direct drive extruder ultimaker 2 clone by madcre8
thingiverse
direct drive extruder mount ultimaker 2 clone
for a mk8 extruder
thingiverse
free
E3d Titan Bowden tube PC4-M10 PTFE Fitting Adapter by smot
...r by smot
thingiverse
created this adapter to connect my 4mm ptfe tube to my titan extruder through a standard pc4-m10 fitting.
thingiverse
free
Ultimaker Holder for Titan Extruder by Peyje
...e ultimaker original und original+. simply print it, put it between the motor and the extruder body and hang it on the ultimaker!
grabcad
free
Ultimaker 2+ E3dV6 HotEnd with Bondtech BMG Extruder
...esign to fit with direct extruder with single 40mm dc fan and big air flow. recommended using 20mm nema 17 motor for lightweight.
thingiverse
free
Ultimaker 2 BMG Direct Drive Extruder for 1.75mm E3D v6 Hotend by Serk44
... bmg direct drive extruder for 1.75mm e3d v6 hotend by serk44
thingiverse
my design of a bmg extruder mount for the ultimaker 2.
thingiverse
free
Parameterized Titan direct extruder for Ender 3
...an direct extruder with stock parts. modification of https://www.thingiverse.com/thing:4164740 with rotating motor by 90 degrees.
thingiverse
free
Ultimaker 2 Extruder Mount for Ultimaker Original by MarkusA380
...380
thingiverse
you will need a part like this if you want to use the ultimaker 2 extruder upgrade kit on an ultimaker original.
thingiverse
free
Petsfang Direct for E3D Titan Direct Extruder for Micro Swiss/ E3Dv6/ or Stock CR10 & Tevo Tornado hot ends by dpetsel
...d/e/2pacx-1vs2txsx-kbr6hmoeubatugca8p2651bopuqj76qd8jk-ufwg4fwrni2ca36mkzly2fuowau_ipzywlo/pubhtml?gid=1736219748&single=true
thingiverse
free
Titan direct mount extruder to tevo tarantula using original metal bracket by zilcha
...mount into tevo tarantula using the original metal bracket that came with the extruder in order to mount it to the printer frame.
Jamesla
thingiverse
free
BigBox IDEX BLTouch by jamesla
...la
thingiverse
i couldn't get the bltouch pin above the hotend so i made this remix.
i moved the bltouch about 2.3mm higher.
thingiverse
free
3030 MGN Linear Rail Alignment Jigs by jamesla
... mgn15 rails on my z and y axis respectively. props to zach_h for the inspiration i merely remixed it to suit my 3030 extrusions.
thingiverse
free
2020 - 2040 Joint by jamesla
...d them 10mm long and put one in each end. they should slide into one and then be positioned with an engineers wand (see: hammer).
thingiverse
free
PS4 Move and Dualshock Holder by jamesla
... a dualshock and move controller holder with holes for micro usb cables. also i added a few more logos to make it sexier/gaudier.
thingiverse
free
BigBox IDEX (MGN15_Rod Replacement) Carriage by jamesla
... in the same model so you will have to split the shells.
to see it in action see the youtube video!!
https://youtu.be/1htsd64xmr0
thingiverse
free
A8 BLV MGN - Nimble V6 Carriage by jamesla
...ludes this entire carriage.
i have also attached the solidworks files for those who have the software and wish to edit the parts.
thingiverse
free
E3D V6 Ultimaker Direct Titan Upgrade (Version 2) by jamesla
...any issues occur!
print with the "bottom" on the bed for the main part. the other orientation should be fairly obvious.
thingiverse
free
BigBox IDEX Titan Aero With MGN12 Linear Rail - Left X Carriage BLTouch by jamesla
...et screws probably around 8-10mm.
the probe offset is roughly x16.4 y27.5, so you should be able to start there and fine tune it.
Ultimaker
3d_export
$5
deer christmas 3
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
deer christmas 2
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
deer christmas
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
deer christmas 5
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
papa noel - santa claus
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
hippopotamus planter pot
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
decoration planter pot cute girl 15
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
decoration planter pot cute girl 14
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
deer christmas 6 3d print model
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
cute fat groot
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
Titan
design_connected
$18
Titan
...titan
designconnected
original btc titan computer generated 3d model.
3d_ocean
$25
RMS Titanic
...rms titanic
3docean
ship steamer titanic
3d model of the rms titanic
turbosquid
$49
Titan
...quid
royalty free 3d model titan for download as obj and ztl on turbosquid: 3d models for games, architecture, videos. (1314276)
turbosquid
$8
Titan
...d
royalty free 3d model titan for download as , fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1545505)
3d_export
$15
eren yeager titan from attack on titan
...eren yeager titan from attack on titan
3dexport
3d model of eren titan
3d_export
$5
titanic new
...titanic new
3dexport
titanic 3d model normal quality for animation
3d_export
$100
Titan 3D Model
...titan 3d model
3dexport
silo launcher rocket titan
titan 3d model acquarius 37854 3dexport
3d_ocean
$25
Titan
...nfs nfshs one ps ps1 psone rod speed sports stakes titan transport vehicle
quality exterior and low polygon interior concept car.
3ddd
$1
Titanic Lamp(table)
...titanic lamp(table)
3ddd
titanic lamp(table)
turbosquid
$10
Titan chair
...osquid
royalty free 3d model titan chair for download as max on turbosquid: 3d models for games, architecture, videos. (1301533)
E3D
turbosquid
$23
E3D - Google Home
... 3d model e3d - google home for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1192509)
cg_studio
free
e3d model
...e3d model
cgstudio
- e 3d model, royalty free license available, instant download after purchase.
turbosquid
$2
Syringe C4D (E3D Ready)
...lty free 3d model syringe c4d (e3d ready) for download as c4d on turbosquid: 3d models for games, architecture, videos. (1336720)
turbosquid
$12
Microphone USB E3D and C4D
...ree 3d model microphone usb e3d & c4d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1568216)
turbosquid
$29
E3D - OnePlus 6 Black
...model e3d - oneplus 6 black for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358534)
turbosquid
$29
E3D - Motorola One 2018
...del e3d - motorola one 2018 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358533)
turbosquid
$29
E3D - Disney MagicBands 2
...l e3d - disney magicbands 2 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1355515)
turbosquid
$29
E3D - Samsung Z4 Smartphone
...e3d - samsung z4 smartphone for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1182179)
turbosquid
$23
E3D - Razer Phone model
...del e3d - razer phone model for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1231207)
turbosquid
$23
E3D - Alcatel Idol 5
... model e3d - alcatel idol 5 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1212799)
Upgrade
turbosquid
$15
Upgraded Glock
...e 3d model upgraded glock for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1185950)
3ddd
$1
Calligaris / UPGRADE
...calligaris / upgrade
3ddd
calligaris
c материалом
3d_export
free
cz upgrade
...cz upgrade
3dexport
https://www.buymeacoffee.com/mestrezen3d https://linktr.ee/mestrezen3
turbosquid
$80
Custer Tank upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$39
Domestos 1 upgrade
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Upgraded tea cup
...upgraded tea cup
3dexport
a cup with an unusual design and a unique shape for a more enjoyable tea experience
3d_export
$8
dixy outlander classic style upgraded poplar wood lounge chair
...utlander classic style upgraded poplar wood lounge chair
3dexport
dixy outlander classic style upgraded poplar wood lounge chair
turbosquid
free
AK-12 + Upgrades low-poly 3D model
...ow-poly 3d model for download as fbx, blend, and unitypackage on turbosquid: 3d models for games, architecture, videos. (1501145)
evermotion
$700
Upgrade from V-ray 1.5 to 3.5 for 3ds max
...here is no need to purchase a new dongle - your current dongles will be reprogrammed to carry v-ray 3. evermotion 3d models shop.
evermotion
$300
Upgrade from V-Ray 2.0 to V-ray 3.5 for 3ds Max
... interface (gui) for editing settings on one machine and one render node for rendering on one machine. evermotion 3d models shop.
Direct
design_connected
free
Compas Direction
...compas direction
designconnected
free 3d model of compas direction by vitra designed by prouvé, jean.
design_connected
$18
Direction Pivotant
...direction pivotant
designconnected
vitra direction pivotant computer generated 3d model. designed by prouvé, jean.
turbosquid
$6
not direct the front
...oyalty free 3d model not direct the front for download as max on turbosquid: 3d models for games, architecture, videos. (1213034)
turbosquid
$10
Rails Direct
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Picto toilet directions
...lude 3d files next to rhino6: x3dv, step, igus, obj and stl. double-sided, flipping changes the gender directions to the toilets.
3ddd
$1
fauteuli direction
...d
chair , vitra , fauteuli
fauteuli vitra chair
design_connected
$18
Fauteuil Direction, 1951
...fauteuil direction, 1951
designconnected
vitra fauteuil direction, 1951 computer generated 3d model. designed by prouvé, jean.
3d_export
$5
Directional tactile 3D Model
...tactile 3d model
3dexport
directional tactile braille tile flooring interior
directional tactile 3d model renob000 71068 3dexport
turbosquid
$26
Radio direction finder A
...ty free 3d model radio direction finder a for download as fbx on turbosquid: 3d models for games, architecture, videos. (1212490)
turbosquid
$7
Wooden direction signage
...ty free 3d model wooden direction signage for download as max on turbosquid: 3d models for games, architecture, videos. (1453747)