E3D Titan Aero Layer Fan Shroud for 50mm Radial + BL mount by FDM_Guru

Last crawled date: 3 years ago

Here is my WIP E3D Aero layer cooling solution. This requires a 50mm radial fan, 2x m3x20 and 1x m3x35 bolt ( links below ).
Note: For FT5 users, make sure you have clearance for homing on the right side. If not, add a spacer to contact the switch earlier. I may move it closer to the gear in future revs but that will only gain a couple mm at most.
UPDATE ( 5/31/2017)
Added BL Touch Mount
UPDATE ( 5/4/2017):
Added Volcano version ( 360, right mount). Its untested, feedback would be great.
UPDATE ( 4/13/2017):
360 degree version! ( standard right & left mount and mirrored right mount for Trinus users)
Added front nozzle version for front-to-back heater blocks.
Added mirrored version for side nozzle. (NOTE! Mirrored is NOT a left hand version. Its for the literally mirrored Titan/Aero combo sold by E3D)
This M3 kit has both the M3x20 and M3x35 required:https://www.amazon.com/M3x20-M3x35-Hexagon-Socket-Washers/dp/B00Y4A7CTO/ref=as_li_ss_tl?ie=UTF8&qid=1491848834&sr=8-1&keywords=m3x20+socket&linkCode=ll1&tag=fg0ea-20&linkId=56122c768d7eebb4b00e23515ffbbc09
Here is the 50mm blower fan I'm using:https://www.amazon.com/Connector-Cooling-Blower-50mmx15mm-Laptop/dp/B00MJU6JR2/ref=as_li_ss_tl?ie=UTF8&qid=1491848905&sr=8-1&keywords=50mm+radial+fan&linkCode=ll1&tag=fg0ea-20&linkId=3c40b4e55f5edc97bb49404b628a659b