Thingiverse
E-Ink Display Console by menzenbach
by Thingiverse
Last crawled date: 3 years ago
This is a small battery powered display console.
Main incredience:
2,9 inch 296x128 E-Ink E-Paper Display Modul
ESP32 Lolin board
3 Buttons
LiPo 3,7V
Note:
LiPo batteries cause a fire risk. You should test the proper charge and discharge behavior of the used board. Purchase high quality products. Don't use damaged or puffy LiPo batteries. Check regularly. Never leave the device charging while unattended. Remove the LiPo battery if the device is not used and store it safe. Respect correct disposal of the battery.
I am using this device to control some home automation features. It's controlled via the 3 buttons, which are used as soft keys. The ESP32 is normally in deep sleep mode and wakes up every minute to update the time, or if the right button is pressed. The communication is based on Bluetooth LE to a central, which provides the current time and different characteristics to control the home automation functions.
I have chosen BLE in order to consume less power. A 1000 mAh battery should last 10 days for the clock update. The buttons are soldered at rows 2 and 4 and at columns B/G, K/P and T/Y.
BoM:
LOLIN32 V1.0.0-ESP32.
Waveshare 2,9 inch 296x128 E-Ink E-Paper Display Modul - B/W version to allow partial update.
LiPo with 2-pin JST-PH connector.
2x8 cm PCB.
3x 12x12mm PCB Push Button.
3x Button Cap 12mm.
Dupont jumper wire - Optionally if you don't want to solder the buttons directly. For the display this should be shipped together with the display.
Screws and Nuts.
See also: https://www.thingiverse.com/thing:2789144
Main incredience:
2,9 inch 296x128 E-Ink E-Paper Display Modul
ESP32 Lolin board
3 Buttons
LiPo 3,7V
Note:
LiPo batteries cause a fire risk. You should test the proper charge and discharge behavior of the used board. Purchase high quality products. Don't use damaged or puffy LiPo batteries. Check regularly. Never leave the device charging while unattended. Remove the LiPo battery if the device is not used and store it safe. Respect correct disposal of the battery.
I am using this device to control some home automation features. It's controlled via the 3 buttons, which are used as soft keys. The ESP32 is normally in deep sleep mode and wakes up every minute to update the time, or if the right button is pressed. The communication is based on Bluetooth LE to a central, which provides the current time and different characteristics to control the home automation functions.
I have chosen BLE in order to consume less power. A 1000 mAh battery should last 10 days for the clock update. The buttons are soldered at rows 2 and 4 and at columns B/G, K/P and T/Y.
BoM:
LOLIN32 V1.0.0-ESP32.
Waveshare 2,9 inch 296x128 E-Ink E-Paper Display Modul - B/W version to allow partial update.
LiPo with 2-pin JST-PH connector.
2x8 cm PCB.
3x 12x12mm PCB Push Button.
3x Button Cap 12mm.
Dupont jumper wire - Optionally if you don't want to solder the buttons directly. For the display this should be shipped together with the display.
Screws and Nuts.
See also: https://www.thingiverse.com/thing:2789144
Similar models
thingiverse
free
4.2" E-Ink Display Console by menzenbach
...ph connector.
4 thumbtacks
dupont jumper wire - optionally if you don't want to solder the buttons directly.
screws and nuts.
thingiverse
free
ESP32 trINKet by 0miker0
...are functional are functional. if you manage to create something of your own i would love to see it by reaching me at @mikerankin
thingiverse
free
StickPi case by assadollahi
...n the back, etc, see my blog entry:https://assadollahi.de/stickpi-a-raspberry-pi-zero-w-with-gpio-buttons-and-an-e-paper-display/
thingiverse
free
NB-11 L Charger Replacement by danbendavid
...d + protectionhttps://www.ebay.com/itm/micro-usb-5v-1a-lithium-battery-charging-module-lipo-charge-board-protection-/182712292766
thingiverse
free
Case for TTGO T5 ESP32 epaper by MegaCadler
.../hobbyking.com/de_de/turnigy-1000mah-1s-20c-lipoly-single-cell.html
i fixed the battery at the bottom with 2 side adhessive tape.
grabcad
free
e-Paper Esp32 - Driver Board
...e-paper esp32 - driver board
grabcad
e-paper esp32 - driver board
grabcad
free
Mini USB Lithium Battery Charging Board Lipo Charger
...ry charging board lipo charger
grabcad
5v mini usb 1a lithium battery charging module
www.facebook.com/amlab1
web.zone.ee/amlab
grabcad
free
1/3AA battery solder PCB
...1/3aa battery solder pcb
grabcad
battery 1/3aa for soldering on pcb board.
grabcad
free
AA battery PCB board
...aa battery pcb board
grabcad
aa size battery for soldering on pcb board
thingiverse
free
Waveshare 7.5" e-paper weather display
...g, as the esp32 doesn't have enough horsepower. will post source and instructions once i clean up the code, or you can pm me.
Menzenbach
thingiverse
free
Mio Alpha Stand by menzenbach
...ercad.
it covers the original charging module.
slightly improved version v2 covers now the full height of the charging mount.
thingiverse
free
Robomow RM510 wheel by menzenbach
...screwed together. the tyre profile is printed with tpu. this gives significant more grip and reduces the noise on solid surfaces.
thingiverse
free
Braun Oral B toothbrush holder by menzenbach
...p://www.thingiverse.com/thing:38046/#files. removed the upper fixing for easier handling and added a intake for a cupping vessel.
thingiverse
free
G Watch R Charging Dock by menzenbach
... that the charging cradle is squeezed in the stand!
note: this design requires glue.dis-assembly might destroy the printed parts!
thingiverse
free
G Watch R Charging Dock - Version 2 by menzenbach
...sb cable can be easily removed.
there is a long and short variant available. the short one works well with the stock usb cable.
thingiverse
free
4.2" E-Ink Display Console by menzenbach
...ph connector.
4 thumbtacks
dupont jumper wire - optionally if you don't want to solder the buttons directly.
screws and nuts.
thingiverse
free
Hybrid Darrieus Helix Rotor by menzenbach
...oderate wind: https://youtu.be/qc80ev-al6k
stronger wind: https://youtu.be/cp6hl0yowee
350mm radius: https://youtu.be/cxbz0u_d9mc
thingiverse
free
Huawei Watch Charging Stand by agentdr8
...watch. inspired by the g watch r dock by menzenbach but adapted to fit the fixed usb connector on...
thingiverse
free
2.7 e-ink display (waveshare) 264*176 by Movil
...esp32 screen manager this is a bigger version of https://www.thingiverse.com/menzenbach e-ink display. i liked his design very much and...
Ink
turbosquid
$3
Ink
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Ink Slab brush double bat ink slab
...model ink slab brush double bat ink slab for download as max on turbosquid: 3d models for games, architecture, videos. (1614863)
turbosquid
$5
Ink Bottle
...
royalty free 3d model ink bottle for download as fbx and obj on turbosquid: 3d models for games, architecture, videos. (1686322)
turbosquid
$10
Ink Pen
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Ink Bottle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
ink cartdriges
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Ink pen
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
ink pavilion
...ink pavilion
3dexport
simple rendering of the scene file
3d_export
$30
ink animation
...ink animation
3dexport
simple rendering of the scene file
3d_export
$30
ink painting
...ink painting
3dexport
simple rendering of the scene file
Console
archibase_planet
free
Console
...console
archibase planet
console console-table desk
console n200212 - 3d model (*.3ds) for interior 3d visualization.
3d_export
free
console
...console
3dexport
console
archibase_planet
free
Console
...console
archibase planet
console console-table rack
console n261111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Console
...console
archibase planet
console console-table desk table
console n210113 - 3d model (*.3ds) for interior 3d visualization.
3ddd
$1
console
...console
3ddd
консоль
console
3ddd
$1
console
...console
3ddd
консоль
console
3ddd
free
console
...console
3ddd
консоль
console
3ddd
$1
console
...console
3ddd
кронштейн
classic console
3ddd
$1
console
...console
3ddd
кронштейн
classic console
3ddd
$1
CONSOLE
...console
3ddd
тумба
console table
Display
3ddd
$1
Display
...display
3ddd
терминал
display computer 3d model
3d_export
$5
Display
...display
3dexport
display<br>verts 2.262<br>faces 3.928
turbosquid
$8
Display
...turbosquid
royalty free 3d model display for download as fbx on turbosquid: 3d models for games, architecture, videos. (1634534)
3ddd
$1
Display cabinet
...display cabinet
3ddd
витрина
display cabinet
turbosquid
$50
display
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$25
DISPLAY
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Display
...e 3d model display for download as ma, max, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1387472)
3d_export
$6
display stand
...display stand
3dexport
super market display stand
3d_ocean
$12
Display Case
...rnishing furniture glass storage vetrinetta white
a 3d model of a display case. the texture for the back of the case is provided.
3d_export
$30
Vehicle display
...vehicle display
3dexport
vehicle display consists of podium and vehicle cover no vehicle there is a veiled vehicle silhouette
E
3ddd
$1
WALL-E
...wall-e
3ddd
wall-e , робот
wall-e
3d_export
$100
e-rickshaw
...e-rickshaw
3dexport
e-rickshaw- it have 3d model of passenger e-rickshaw
3d_ocean
$12
Wall E
...wall e
3docean
character robot wall e
its a 3d model of wall e….
turbosquid
$68
Model-E Droids 2-E Q-E Star Wars
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$45
Model-E Droids 2-E Q-E Star Wars3d model
....3ds .c4d .obj .vue - model-e droids 2-e q-e star wars 3d model, royalty free license available, instant download after purchase.
3d_export
$100
e-rickshaw
...e-rickshaw
3dexport
e-rickshaw design for passenger it have all mechanical component
design_connected
$7
Cone E
...cone e
designconnected
bonaldo cone e computer generated 3d model. designed by pasini, ennio.
3ddd
$1
Wall-E NEW
...wall-e new
3ddd
wall-e , робот
wall-e
design_connected
$29
Extrasoft E
...extrasoft e
designconnected
living divani extrasoft e computer generated 3d model. designed by lissoni, piero.
3ddd
$1
E-Turn
... скамейка
современная скамейка фирмы kundalini.
модель e-turn.
дизайнер brodie neil.
размеры: h 42 cm l 185 cm w 54 cm