Thingiverse
DVR Box for Eachine ProDVR by Romout
by Thingiverse
Last crawled date: 3 years ago
I thought it might be handy to have some kind of box to place the small DVR recorder as well as a 5V BEC and two Plugs to connect everything easily. The parts are the base and the cover. I used two cinch sockets from an old SCART Connector as well as a small 5V BEC ( http://www.banggood.com/3A-UBEC-Module-Low-Ripple-Bluesky-Mini-Switch-Mode-DC-BEC-5V-12V-2-6S-Supply-p-993056.html?p=5I2013540154201404DT ). The box features some holes for the power connector (I used a red JST connector), the video out plugs to connect a display or your goggles, the two cinch sockets and the micro SD card.
Similar models
thingiverse
free
Eachine ProDVR Box by jean5
...properly the rca plug and 5v power supply, also there is a switch to see the video from rx and from dvr outpout. plug and play .
thingiverse
free
Skyzone / Fatshark DVR Upgrade incl. Lipo Mount by dergutehirte
...dzesivw
lipo 1600 mah :https://www.banggood.com/custlink/mv339gqi8r
if you got any questions or problems, so just let me know! :)
3dwarehouse
free
DC Power Connection, waterproof
...le plug and female socket ... both connected and disconnected #connector #dc #electrical #electronics #plug #power_supply #socket
thingiverse
free
eachine dvr goggle clip. by PIEngr
...ed to physically unplug it from the the radio and move it to video in.
connector: jst-xh 4p
reg: micro 5v reg
switch: spdt slider
thingiverse
free
Banana plug resistor box by TinyTinker
...the way.
i designed it around the cheapest model of banana socket you can find on aliexpress/ebay. others models might also work.
thingiverse
free
Mobius FPV Docking by 2beers
...er-supply-p-920327.html
1x 5.8ghz videotransmitterhttp://www.banggood.com/eachine-et200-5_8g-200mw-mini-transmitter-p-972618.html
thingiverse
free
Dual DPS-600PB Brackets by bdwalker1
...ne 12v and two 24v outputs. i also used a 4 pin jst-sm connector for 5v, gnd, pson and dc good connections from the control pins.
thingiverse
free
RCA cinch dust plug cap by AlexDeutsch
...
thingiverse
dust plug/cap for rca (cinch) socket. pevents the unused sockets on your dj-mixer or hifi from getting dusty/dirty.
thingiverse
free
power supply socket improviser, 6mm by pla_godX
...ector of the plug. you can switch polarity as given by the plug.
to stabilize you should use an m3 nut and screw like in the pic.
3dfindit
free
Plug & Socket Lighting Connectors
...plug & socket lighting connectors
3dfind.it
catalog: te connectivity
Romout
thingiverse
free
ESC Protector for RealAcc X210 by Romout
... x210 by romout
thingiverse
simple protector for my escs. fits quite well on the racerstars 30a lite escs. pictures will follow.
thingiverse
free
Janbex Spool Holder by Romout
...ilar design and recreated it for my inner diameter of 20mm.
the janbex 1kg 1,75 white pla which i use has a 54mm hole (diameter).
thingiverse
free
Geeetech Prusa i3 compatible dual-fan-mount for 40mm fans by Romout
...unt for 40mm fans by romout
thingiverse
first version of a custom fan mount. not finished up to now. printable without supports.
thingiverse
free
Foxeer Top-Mount for RealAcc X210 by Romout
...ard for better protection of the antenna. it's then also possible to use a zip-tie to keep the antenna close to the top-plate
thingiverse
free
Prop-Protector for KingKong Smart 100 Quadcopter by Romout
...ust put a small drop of hot glue to the edge of the top plate. that will lift the protector a bit.
v2: has a bit wider base mount
thingiverse
free
Very simple Battery protector for ~210 Quads by Romout
...antenna holes
batteryprotector-incl-antenna.stl has double sized strap-hooks and two antenna holes on one side of the protector.
thingiverse
free
Motor Mount for DIY Quadcopters by Romout
...g screws (default: 16mm and 19mm, see example stl) and an rotational angle (defaulting to 0 but being 45 degrees in the example).
thingiverse
free
Bottom Bumper holder for DF-Models (Drive&Fly) Desert Fighter 4 by Romout
...the rc car of my son. he lost the part and i didn't want to get a complete bumper. it's quick and dirty but does its job.
thingiverse
free
Very simple led-holder (Matek Led Strip with Buzzer) for Lisam 210 by Romout
... better calibration as i still had to sand the holes a bit to make it fit. i used hot glue to stick the leds into the led holder.
Prodvr
thingiverse
free
Eachine PRODVR Mount for Fatshark Strap by robschii
...eachine prodvr mount for fatshark strap by robschii
thingiverse
eachine prodvr mount clip for fatshark strap
thingiverse
free
Eachine proDVR Fatshark Clip by OliRanks
...signed this to mount my eachine prodvr, that i soldered directly to the module in my fatshark attitude v2, to the fatshark strap.
thingiverse
free
EV100 ProDVR Strap Mount by marcotheboy
...the slot, it helps to stretch it while inserting it.
i updated it to version 2: the strap is now in the middle (it looks nicer).
thingiverse
free
Eachine ProDVR Box by jean5
...properly the rca plug and 5v power supply, also there is a switch to see the video from rx and from dvr outpout. plug and play .
thingiverse
free
Eachine ProDVR Fatshark case by d2st3r
...iverse
this is a case for my fatshark teleporter v5 mod.
you can see the video here:
https://www.youtube.com/watch?v=mpsi4dqgnqa
thingiverse
free
GE FPV RX5808 Clip on Case by Rec0iL_One
...the cover one with a slot for an eachine prodvr and one without. the slots above the display and...
thingiverse
free
FPV Blackbox by FreeFlight
...ground station for guest. by adding a dvr (eachine prodvr with playback it becomes a sort of blackbox to...
thingiverse
free
RMRC 8" Monitor All-in-One Ground Station with Goggle output by carrera0to60
...tx antenna (better version good for about 6 miles)https://www.readymaderc.com/store/index.php?main_page=product_info&products_id=1253 dvrhttp://www.banggood.com/eachine-prodvrpro-dvr-mini-video-audio-recorder-for-fpv-multicopters-p-1061196.html?rmmds=search small components main power switchhttps://www.radioshack.com/products/pushon-pushoff-sw rca out jack for...
thingiverse
free
Tarango FPV controller by Dropoff510
...for 2s 6000mah.https://www.getfpv.com/samsung-30q-18650-3000mah-15a-battery.html the dvr is from amazon or ebay.https://www.amazon.com/crazepony-eachine-prodvrrecorder-quadcopter/dp/b01hgawwde/ref=sr_1_4?s=electronics&ie=utf8&qid=1518660278&sr=1-4&keywords=fpv+dvr the video and power switch https://www.amazon.com/gp/product/b008dfyhv2/ref=oh_aui_search_detailpage?ie=utf8&psc=1 axii antenna https://www.getfpv.com/lumenier-axii-mmcx-5-8ghz-antenna-rhcp.html...
Dvr
3d_export
$28
dvr camera videocamera electronics auto
...-in microphone<br>file includes<br>3ds max 2017 vraycorona<br>3ds max 2014 vraycorona<br>fbx<br>obj
3d_export
$10
Dome Camera 3D Model
...security closed circuit television closed-circuit video cameras surveillance monitoring dvr digital recorder lens home cam protection dome camera 3d...
thingiverse
free
DVR Bracket by GarthFPV
...dvr bracket by garthfpv
thingiverse
dvr bracket for fpv dvr
thingiverse
free
fasteners for dvr by denisgorevich
...fasteners for dvr by denisgorevich
thingiverse
fasteners for dvr
3dfindit
free
DVR Series
...dvr series
3dfind.it
catalog: zimmer group
3dfindit
free
DVR Series
...dvr series
3dfind.it
catalog: zimmer group
thingiverse
free
FR009 DVR CASE by Kelvin226
...fr009 dvr case by kelvin226
thingiverse
fr009 dvr case
thingiverse
free
holder cam DVR by Alfredxxx
...holder cam dvr by alfredxxx
thingiverse
dvr cam holder.
thingiverse
free
FR009 DVR CASE by gyjofi
...fr009 dvr case by gyjofi
thingiverse
fr009 micro dvr case
thingiverse
free
zx14 dvr holder by mediamata69
...zx14 dvr holder by mediamata69
thingiverse
this is used to hold a dvr cam recording on kawasaki 1400
Eachine
thingiverse
free
Eachine DVR strap clips for Eachine EV100 by Joza
...ingiverse
simple lightweight clip to mount the eachine ev100 micro av recorder to a 19mm strap of the eachine ev100 fpv goggles.
thingiverse
free
Eachine Twig Canopy
...eachine twig canopy
thingiverse
canopy for the eachine twig drone.
thingiverse
free
Support for the Eachine TS5828L
...or the eachine ts5828l
thingiverse
this is a support for the eachine video transmitter tx5828l. made it to use with zaggy wings.
thingiverse
free
Eachine TX02 by Cselloman
...eachine tx02 by cselloman
thingiverse
this is a 1:1 copy of the eachine tx02 cam. use it on your designs freely
thingiverse
free
Eachine ROTG02 Box by Lorent_Den
...eachine rotg02 box by lorent_den
thingiverse
eachine rotg02 box
thingiverse
free
ducts for eachine cvatar by dalodi
...ducts for eachine cvatar by dalodi
thingiverse
ducts for eachine cvatar
thingiverse
free
eachine e010 controller by ejpsx
...eachine e010 controller by ejpsx
thingiverse
eachine e010 controller
thingiverse
free
Mount for Eachine Pro58 module for Eachine VR D2 goggles
...ine vr d2 goggles
thingiverse
you can read more about the upgrade on: http://lll.mk/fpv/eachine-pro58-boxed-goggles-on-steroids/
thingiverse
free
eachine VTX LT200 case
...eachine vtx lt200 case
thingiverse
case for vtx eachine lt200
thingiverse
free
Eachine E010 stick by DaniF
...eachine e010 stick by danif
thingiverse
stick for rc eachine e010
Box
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box 2 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
carton cardboard box box
box 1 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$6
box
...box
3dexport
box
3d_export
$5
Box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
3d_export
$5
box
...box
3dexport
box
archibase_planet
free
Box
...box
archibase planet
box box for paper notebook pencil
box - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n170111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Box
...box
archibase planet
box carton cardboard box
box n050411 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Boxes
...boxes
archibase planet
boxes box case bin
boxes n281213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.