Duet Wifi ATX Case by hitsuji

Last crawled date: 3 years ago

This is a simple case for a Duet Wifi powered by an ATX power supply. The power supply gets it's own chamber, with necessary power wires fed up to top chamber. Here there is a 120mm fan placed below the Duet mainboard for cooling. it slots into the columns the mainboard is then glued onto the columns using a silicone like glue for strength and easy removal. There is also placement to mount a 45mm X 70mm external mosfet (Fusion 360 model design included for easy modification). There are 2 large holes at the back for cable exit, with small holes that can be used for cable ties. Cable ties can also be used to manage cables to the base of the top unit.
Filter stls aren't included are essentially just a 1mm tall cuboid with top and bottom surface of 1 layer at 0.2mm per layer and either 50% grid infill or 75% rectingular infill. Top and bottom layers are removed post gcode export to leave a 3 layer shell and infill only model that acts as a filter. I recommend creating the length and width of the filters as 1mm short of the actual gap.