Dualstrusion Remix of Nick's Replacement Faucet handles by Motley74

Last crawled date: 3 years ago

I just made a remix of Nick's Replacement Faucet handles (http://www.thingiverse.com/thing:719825) as I have a dual extruder machine and wanted to take advantage of that instead of having to print the eyes separately and having to glue them in. Also the files are in STL format so you can print without needing to load openscad and compile/export the files. You can still print the eyes separately or you can use your program to combine the crossbones and eyes into a single print with dual colors.
Note: The STL files were saved with an offset from center for my FF Creator Pro build plate to avoid the slight imperfection resulting from the center screw holding the build plate but you can move them if you like, just be sure that if you move one of the files you also move the other (with the exception of the faucet file) in the same way if you are planning to use dual extrusion.