Thingiverse
Dual swinging cr10 hotend with magnetic lock on G2S Pro delta by XsmartX
by Thingiverse
Last crawled date: 3 years, 1 month ago
Swinging/switching CR10S hotends for the G2s delta printer
By using magnets to lock the position, servo jitter and inaccuracy is no issue
By using an eccentric drive it is possible to use a very small rc servo with 180°
Bearrings used to swing are MF63ZZ
Bearring for the eccentric drive is MR148ZZ
Magnets are Neodym 8x3mm with bore
Servo is a TowerPro MG90S
All fans are 30x30x10mm, two for hotend and one for layer cooling
Activating the servo subsystem in Marlin by setting nr of servos >0
At hotend swap send "M280 P0 S50" for hotend 1
or "M280 P0 S150" for hotend 2
On the GT2860 rev A board the servo pwm line has to be soldered to R22 (cpu side)
By using magnets to lock the position, servo jitter and inaccuracy is no issue
By using an eccentric drive it is possible to use a very small rc servo with 180°
Bearrings used to swing are MF63ZZ
Bearring for the eccentric drive is MR148ZZ
Magnets are Neodym 8x3mm with bore
Servo is a TowerPro MG90S
All fans are 30x30x10mm, two for hotend and one for layer cooling
Activating the servo subsystem in Marlin by setting nr of servos >0
At hotend swap send "M280 P0 S50" for hotend 1
or "M280 P0 S150" for hotend 2
On the GT2860 rev A board the servo pwm line has to be soldered to R22 (cpu side)
Similar models
thingiverse
free
FLSUN SuperRacer Servo Finish Flag mount by voltNik
...
g1 z+5 e-3 f3000
m280 p0 s60
m280 p0 s120
m280 p0 s60
m280 p0 s120
m280 p0 s60
m280 p0 s120
m280 p0 s60
m280 p0 s120
m280 p0 s60
thingiverse
free
Geeetech G2/G2s Universal Spider for E3D v5/v6 and PEEK J-Heads by ezrec
... press the lock into the slot to complete assembly.
the nozzle spread is 30mm by default, to support the default e3d hotend fans.
thingiverse
free
Snap-Together Geeetech G2/G2s Layer Fan System by ezrec
...le hotend g2
dual hotend g2s (20mm spread)
single hotend g2 pro
dual hotend g2s pro (26mm spread)
e3d v6 separation (30mm spread)
cg_trader
free
Delta 75kw servo drive
...ervo drive
cg trader
delta 75kw servo drive 3d, available formats rfa, brackets delta design free, ready for 3d animation and ot
grabcad
free
Delta .75kw servo drive
...delta .75kw servo drive
grabcad
delta .75kw servo motor for designing machines, good for brackets etc
grabcad
free
CONVERSION TO VOLCANO+ BONDTECH FOR CR10 CR10S
...printable mode allow you to convert a cr10 or cr10s to a direct drive bondtech and volcano hotend, with original fan and stepper.
grabcad
free
Eccentric Assembly
...ring to the shaft. eccentric: provides a collar with an eccentric lip that mates with an eccentric lip on the bearing inner ring.
thingiverse
free
Delta G2S e3d clone dual fan shroud by glendonwaldner
... onto this spider assembly. http://www.thingiverse.com/thing:1235831
might need another 30mm fan for second layer cooling option.
thingiverse
free
Infill 3D Delta Bot Carrier by Infill3D
...39;ll start working on the non-magnetic version of the effector soon.
updates can be found here https://infill3d.com/20-downloads
thingiverse
free
Universal Kossel / Delta / Rostock Effector lock and cover for hotend by robertoreis
...end by robertoreis
thingiverse
a effector cover and lock hotend. suport tools, 30mm fan for printer and 40mm fan for the hotend.
Xsmartx
thingiverse
free
Shiftpaddle extension for Smart ForTwo by XsmartX
...giverse
extensions for the rather small shift paddles in the smart fortwo car.
the extensions just clic-on the original paddles.
thingiverse
free
Shiftpaddle extension for Smart ForTwo (smoother shape) by XsmartX
...smoother extensions for the rather small shift paddles in the smart fortwo car.
the extensions just clic-on the original paddles.
thingiverse
free
Smart Fortwo 451 RearWindowSpacer by XsmartX
...rt fortwo 451
it fits smarts 2007 - 2016
just added the aligned version,
it will lock better.
just use what you think is best :-)
thingiverse
free
Remote electronics box for stepper Instruments by XsmartX
...fit in the pod, so i put them under the dash in a seperate box.
this way you can put any stepper gauge in the original smart pod.
thingiverse
free
Spacers for the S-Mann splitter for Smart ForTwo by XsmartX
...litter corners.
printed in black abs, then smoothened with aceton.
the holes don't fit too good, i just drilled the splitter.
G2S
3ddd
$1
Stand G2
..., stand , ar3
комод-паттерн (g2) design by ar3+
turbosquid
$25
Ring G2
...turbosquid
royalty free 3d model ring g2 for download as stl on turbosquid: 3d models for games, architecture, videos. (1215199)
turbosquid
$19
FAMAS G2
...urbosquid
royalty free 3d model famas g2 for download as fbx on turbosquid: 3d models for games, architecture, videos. (1537479)
3d_ocean
$14
Mobile phone LG G2
... animation and rendering was done in softimage 2013. i am uploading obj. file with textures as well as softimage 2013 file whi...
turbosquid
$29
Pindad G2 Elite
...ree 3d model pindad g2 elite for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1446515)
3d_export
$99
FAMAS G2 3D Model
...ic famas g2 france french fully gun mas rifle semi weapon 3d models assault weapon gun
famas g2 3d model humster3d 94303 3dexport
3d_export
$49
LG G2 3D Model
...g 3g android droid smartphone cell phone mobile cellular tft lcd touchscreen touch screen
lg g2 3d model humster3d 85156 3dexport
turbosquid
$100
Canon PowerShot G2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$49
TMobile G2 3D Model
...se gingerbread 233 droid cell phone mobile cellular tft lcd touchscreen touch screen
tmobile g2 3d model humster3d 51180 3dexport
3ddd
$1
Ковёр G2
...ковёр g2
3ddd
ковёр
форматы в архиве:
max.2014
max.2011
obj
fbx
все текстуры присутствуют
Cr10
3d_export
$21
Hall tree and Clothing Rack CR10
... real object. 3. lights and cameras are included in the scenes renders using vray * renders are made in 3ds max 2018 using vray 5
thingiverse
free
Clips for Ender 3, CR10, CR10S
.... maybe others, but only been tested with these.
these clips makes a tight fit, so that the cable and bowden tube stays in place.
thingiverse
free
X-axis endstop offset for cr10 cr10s Ender 3
...x-axis endstop offset for cr10 cr10s ender 3
thingiverse
x-axis endstop offset for cr10 cr10s ender 3
thingiverse
free
Filament Sensor CR10
...or cr10
thingiverse
remix of the sensor with fixation in order to face directly the extruder and ptfe tube
cr10, cr10s ender3...
thingiverse
free
Fan V4 CR10/CR10S Ender3 Versione 4 by creativesolutions-lab
...fan v4 cr10/cr10s ender3 versione 4 by creativesolutions-lab
thingiverse
fan v4 cr10/cr10s versione 4
thingiverse
free
CR10 Feet by Leighton417
...cr10 feet by leighton417
thingiverse
this is a cr10 feet for people who have short table width.
thingiverse
free
Dremel Attachment for CR10, Ender 3, Cr10s by Conn22_43
...verse
a bracket to hold a dremel onto any ender 3, cr10 bracket. i printed it in petg, but it can be made in any rigid material.
thingiverse
free
CR10S-Plus Hotend by scorpio_man30ro
...cr10s-plus hotend by scorpio_man30ro
thingiverse
cr10s-plus hotend
thingiverse
free
Leveling knob CR10 by JMJacques
...leveling knob cr10 by jmjacques
thingiverse
leveling knob cr10
thingiverse
free
Soporte Superior sensor filamento CR10 v2 - CR10 v3 by Guimir
...3 by guimir
thingiverse
soporte sensor de filamento guia superiror tipo cr10 v3 para convertir la cr10 v2 en extrusión directa.
Swinging
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing seat swing seat
swing 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 1 n280313 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat seat
swing 2 n280313 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat playground
swing lappset n051113 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Swing
...swing
archibase planet
swing swing seat playground
swing 2 n230814 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
Hotend
thingiverse
free
hotend by fablab_lueneburg
...hotend by fablab_lueneburg
thingiverse
hotend model
thingiverse
free
Hotend for Graber
...hotend for graber
thingiverse
hotend complement pastes for graber printerhttps://youtu.be/0koxhnsuhdy
thingiverse
free
Hotend adapter by antaviana
...hotend adapter by antaviana
thingiverse
hotend adapter
thingiverse
free
hotend fan by mming1106
...hotend fan by mming1106
thingiverse
hotend fan
thingiverse
free
Hotend schema by ione
...hotend schema by ione
thingiverse
hotend project schema
thingiverse
free
Fabtotum XY Hotend holder for E3D Hotend
...s with integrated supports.
more for the project you can see here: https://kf-designs.com/2019/09/07/fabtotum-printer-conversion/
thingiverse
free
HotEnd Stand by onepointdiy
...tend, when you make your new hotend or repair your j-head or mg-plus hotend.
the hole of 16mm, please adjust using a reamer, etc.
thingiverse
free
fast magnetic hotend changer for Chimera Hotend by Draman
...chimera hotend !
and new basis (the hole from original is to small)
it is a remix form skimmy's fast magnetic hotend changer
thingiverse
free
Hotend Fan Adapter for MicroSwiss All Metal Hotend by jo_schi_man
...
thingiverse
little change for the hotend fan adapter to hold the microswiss all metal hotend (slightly longer and sharp edges).
thingiverse
free
Merlin Hotend by Alejanson
...merlin hotend by alejanson
thingiverse
this is a 1:1 drawing of the classic merlin hotend.
Delta
design_connected
$16
Delta
...delta
designconnected
arflex international spa delta computer generated 3d model. designed by koivisto, eero.
design_connected
$16
Delta
...delta
designconnected
lj lamps delta computer generated 3d model. designed by janowski-lenhart, sasha.
design_connected
$13
Delta
...delta
designconnected
emu group delta armchairs computer generated 3d model. designed by marin chiaramonte .
3ddd
$1
Delta Light
...delta light
3ddd
delta light , you-turn reo 3033
точечний светильник delta light
3ddd
$1
Blanco / delta
...blanco / delta
3ddd
blanco , мойка
мойка blanco delta со смесителем
3ddd
$1
Delta Light Spot
...delta light spot
3ddd
delta light
светильник фирмы delta light
3ddd
free
Bianchi Delta LVMDLT200100
...i delta lvmdlt200100
3ddd
bianchi delta , смеситель
смеситель bianchi delta lvmdlt200100
design_connected
free
Delta 190
...delta 190
designconnected
free 3d model of delta 190 by zanotta designed by progetti, emaf.
design_connected
$27
Delta 211
...delta 211
designconnected
zanotta delta 211 computer generated 3d model. designed by progetti, emaf.
design_connected
$27
Delta 234
...delta 234
designconnected
zanotta delta 234 computer generated 3d model. designed by progetti, emaf.
Dual
turbosquid
free
Dual Pistols
...ls
turbosquid
free 3d model dual pistols for download as fbx on turbosquid: 3d models for games, architecture, videos. (1320360)
turbosquid
$2
Dual Axe
...urbosquid
royalty free 3d model dual axe for download as fbx on turbosquid: 3d models for games, architecture, videos. (1332372)
turbosquid
$10
Dual Lesaths
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
плитка Dual Bianco (Испания)
...й плитки venis dual (испания). технические качества: устойчивость к стирания, отличная геометрия, отсутствие проблем при укладке.
turbosquid
$35
Dual Mesh Fonts
...ree 3d model dual mesh fonts for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1352989)
turbosquid
$29
Dual Flask with Bungs
...del dual flask with bungs for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1210512)
turbosquid
$19
Dual Socket Plug
...3d model dual socket plug for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1303912)
turbosquid
$13
Dual Adjustable Pulley
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Amoi N809 Dual
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Dual Turret Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Magnetic
3d_ocean
$2
Magnet
...magnet 3docean 3d 3ds max electric magnet magnetic magnetism max model polygon realistic tesla magnet created in...
turbosquid
$6
Magnet
...
turbosquid
royalty free 3d model magnet for download as obj on turbosquid: 3d models for games, architecture, videos. (1548733)
turbosquid
$6
magnet
...uid
royalty free 3d model magnet for download as 3dm and max on turbosquid: 3d models for games, architecture, videos. (1670606)
turbosquid
$1
Magnet
...y free 3d model magnet for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1215037)
turbosquid
$7
Magnet
...agnet for download as blend, unitypackage, fbx, gltf, and obj on turbosquid: 3d models for games, architecture, videos. (1576588)
3d_export
$5
magnetic knife holder
...magnetic knife holder
3dexport
ordinary magnetic knife holder
archive3d
free
Fridge magnet 3D Model
...3d model archive3d refrigerator magnet fridge magnet magnet toy magnetic s n280712 - 3d model (*.3ds) for interior 3d...
turbosquid
$35
Magnetic butterflies
...alty free 3d model magnetic butterflies for download as blend on turbosquid: 3d models for games, architecture, videos. (1315792)
turbosquid
$2
Magnetic Board
...quid
royalty free 3d model magnetic board for download as ma on turbosquid: 3d models for games, architecture, videos. (1264141)
turbosquid
$977
Magnetic Lego
...oyalty free 3d model magnetic lego for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1142761)
Lock
turbosquid
$1
Lock
...ck
turbosquid
royalty free 3d model lock for download as fbx on turbosquid: 3d models for games, architecture, videos. (1286851)
3d_export
$5
lock handle
...lock handle
3dexport
lock handle
3d_export
$5
hinged lock
...hinged lock
3dexport
hinged lock
turbosquid
$1
Lock Box with combination lock
...ee 3d model lock box for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1215494)
turbosquid
$2
Lock
...
royalty free 3d model lock for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1452660)
turbosquid
$35
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Pro
turbosquid
$29
Pro
...ree 3d model mac pro for download as obj, c4d, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1505782)
turbosquid
$15
Apple Mac Pro and Pro Display
...ee 3d model apple mac pro and pro display for download as max on turbosquid: 3d models for games, architecture, videos. (1417078)
3d_export
$5
iphone 13 pro max and pro
...3 pro max and 13 pro the model is made in four colors (graphite, gold, silver, and blue), all of which are attached in the files.
3d_export
free
sapphire pro
...sapphire pro
3dexport
sapphire pro 3d printer head mask
3d_export
$4
macbook pro
...macbook pro
3dexport
macbook pro 13" inch 2020 years model
3ddd
free
GentleLase Pro
... syneron , candela
gentlelase pro аппарат для лазерной эпиляции
turbosquid
$25
PRO frame
...rbosquid
royalty free 3d model pro frame for download as max on turbosquid: 3d models for games, architecture, videos. (1148329)
turbosquid
$5
Alien pro
...osquid
royalty free 3d model alien pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1678446)
turbosquid
$5
iphone11 pro
...uid
royalty free 3d model iphone11 pro for download as blend on turbosquid: 3d models for games, architecture, videos. (1562707)
3ddd
$1
Mac Pro (appel)
...mac pro (appel)
3ddd
компьютер , apple
mac pro