Thingiverse
Dual Mode Windup Car with windows. by biline
by Thingiverse
Last crawled date: 3 years ago
This a slight remix of Dual Mode Windup Car by gzumwalt http://www.thingiverse.com/thing:2054125
I loved the design but after printing the first one and showing to friends and family I noticed they didn't know which end was the front until I wound it up and showed them. I thought maybe if it had some head lights it would make it more clear I ended up also added a dual exhaust to it also.
I wanted the gears hidden so that it would look more like a Car model so I made some windows. I did all these changes with Tinkercad, it was a learning experience but I'm happy with the results but I do need to spend time with Fusion 360.
Only 4 parts are changed from the original design and they are:
Remix_Body_left_lights
Remix_Body_Right_lights
Remix_Body_top_cut-out
Remix_Car_Windows, The windows need to print on it's side with supports all the rest is support free (you will need to glue the windows to the top to make installation easier).
Not sure if it was an error but the design called for 16 size 222 (1 3/4 O.D., 1 1/2 I.D., 1/8" diameter) O-rings for the tires I could not install them on the rims they were too tight I ended up using size 223 (1-5/8" ID, 1-7/8" OD, 1/8" diameter) O-rings for the tires and they fit perfectly.
I printed everything at .02mm in PLA with 80% infill with 4 perimeters on Top, Bottom and Sides.
All of the originals parts are included here so you don't need to download anything else.
Install instructions are from the original and stay the same.
assemble Dual Mode Windup Car in the following order.
1) Position "Axle Spring.stl" into "Chassis Right.stl", then press "Spring.stl" and "Pawl.stl" onto "Axle Spring.stl".
2) Press one each of "Cross Member.stl" into "Chassis Right.stl" at the front and rear.
3) Press "Gear Floating Pinion Guide Right.stl" into "Chassis Right.stl".
4) Press "Gear Floating Pinion Guide Left.stl" into "Chassis Left.stl".
5) Press "Axle Gear Idler Large.stl" into "Chassis Right.stl". When fully installed, there should be 15.5mm between the inside surface of "Chassis Right.stl" and the shoulder on "Axle Gear Idler Large.stl".
6) Press "Axle Gear Idler Floating.stl" into "Gear Pinion Floating.stl". There should be 4mm of "Axle Gear Idler Floating.stl" extending from both ends of "Gear Pinion Floating.stl".
7) Press "Gear Axle Rear.stl" onto "Axle Rear.stl", aligning "Gear Axle Rear.stl" with the spline on "Axle Rear.stl".
8) Position the rear axle assembly in "Body Right.stl".
9) Position the floating idler assembly in "Body Right.stl.
10) Position "Gear Pawl.stl" onto the axle spring assembly.
11) Position "Gear Idler Large.stl" onto "Axle Gear Idler Large.stl".
12) Position "Spacer Axle Gear Idler Large.stl" onto "Axle Gear Idler Large.stl".
13) Position "Spacer Axle Spring.stl" onto "Axle Spring.stl".
14) Press "Body Left.stl" onto the body right assembly. When complete, the front and rear cross members must be flush with the outside surfaces of the body sides, and there should be 37mm distance between the inside surfaces of "Body Right.stl" and "Body Left.stl".
15) Install the o-rings on all wheels, then install one each of "Wheel Right.stl" and "Wheel Left.stl" onto the rear axle assembly.
16) Press "Axle Front.stl" into the remaining "Wheel Right.stl", then slide the assembly into position and press the remaining "Wheel Left.stl" onto the axle assembly.
17) Attach "Body Top.stl" onto the front and rear "Cross Member.stl".
I loved the design but after printing the first one and showing to friends and family I noticed they didn't know which end was the front until I wound it up and showed them. I thought maybe if it had some head lights it would make it more clear I ended up also added a dual exhaust to it also.
I wanted the gears hidden so that it would look more like a Car model so I made some windows. I did all these changes with Tinkercad, it was a learning experience but I'm happy with the results but I do need to spend time with Fusion 360.
Only 4 parts are changed from the original design and they are:
Remix_Body_left_lights
Remix_Body_Right_lights
Remix_Body_top_cut-out
Remix_Car_Windows, The windows need to print on it's side with supports all the rest is support free (you will need to glue the windows to the top to make installation easier).
Not sure if it was an error but the design called for 16 size 222 (1 3/4 O.D., 1 1/2 I.D., 1/8" diameter) O-rings for the tires I could not install them on the rims they were too tight I ended up using size 223 (1-5/8" ID, 1-7/8" OD, 1/8" diameter) O-rings for the tires and they fit perfectly.
I printed everything at .02mm in PLA with 80% infill with 4 perimeters on Top, Bottom and Sides.
All of the originals parts are included here so you don't need to download anything else.
Install instructions are from the original and stay the same.
assemble Dual Mode Windup Car in the following order.
1) Position "Axle Spring.stl" into "Chassis Right.stl", then press "Spring.stl" and "Pawl.stl" onto "Axle Spring.stl".
2) Press one each of "Cross Member.stl" into "Chassis Right.stl" at the front and rear.
3) Press "Gear Floating Pinion Guide Right.stl" into "Chassis Right.stl".
4) Press "Gear Floating Pinion Guide Left.stl" into "Chassis Left.stl".
5) Press "Axle Gear Idler Large.stl" into "Chassis Right.stl". When fully installed, there should be 15.5mm between the inside surface of "Chassis Right.stl" and the shoulder on "Axle Gear Idler Large.stl".
6) Press "Axle Gear Idler Floating.stl" into "Gear Pinion Floating.stl". There should be 4mm of "Axle Gear Idler Floating.stl" extending from both ends of "Gear Pinion Floating.stl".
7) Press "Gear Axle Rear.stl" onto "Axle Rear.stl", aligning "Gear Axle Rear.stl" with the spline on "Axle Rear.stl".
8) Position the rear axle assembly in "Body Right.stl".
9) Position the floating idler assembly in "Body Right.stl.
10) Position "Gear Pawl.stl" onto the axle spring assembly.
11) Position "Gear Idler Large.stl" onto "Axle Gear Idler Large.stl".
12) Position "Spacer Axle Gear Idler Large.stl" onto "Axle Gear Idler Large.stl".
13) Position "Spacer Axle Spring.stl" onto "Axle Spring.stl".
14) Press "Body Left.stl" onto the body right assembly. When complete, the front and rear cross members must be flush with the outside surfaces of the body sides, and there should be 37mm distance between the inside surfaces of "Body Right.stl" and "Body Left.stl".
15) Install the o-rings on all wheels, then install one each of "Wheel Right.stl" and "Wheel Left.stl" onto the rear axle assembly.
16) Press "Axle Front.stl" into the remaining "Wheel Right.stl", then slide the assembly into position and press the remaining "Wheel Left.stl" onto the axle assembly.
17) Attach "Body Top.stl" onto the front and rear "Cross Member.stl".
Similar models
thingiverse
free
Front Wheel Axle Holder by shawwwn
...://www.thingiverse.com/thing:1376049
rev. 1:
changes made to adapt the rear axle holder.
adjust axle position.
freecad 0.15(4671)
thingiverse
free
Double Decker City Bus - HO Scale by Stretch57
...allow glass installation on the exterior of the bus similar to the prototype. -doors are painted and glue to...
thingiverse
free
Outlaw Hardbody Chassis by SlotcarBrad
...ing the perfect position. it takes a 16d motor and small wheels. it has 2 positions for the front axle, to give you more options.
thingiverse
free
1/8 IC on road wheel cut gauge by FSalinet
...t gauge by fsalinet
thingiverse
front and rear cut gauge for 1/8 ic chassis.
i made it for front 69mm tires and rear 76mm tires.
grabcad
free
Assembly, Front Idler - Bogey Wheel
...assembly, front idler - bogey wheel
grabcad
assembly, front idler - bogey wheel for a skidsteer i designed
thingiverse
free
Dual pinion HSP02024 diff front axle
... a dual front steerable axle truck if you pair it with this flipped front axle version:
https://www.thingiverse.com/thing:3967886
thingiverse
free
Rear Wheel Axle Holder by shawwwn
...le holder, rev.1 - http://www.thingiverse.com/thing:1376086)
rev. 1:
changes made to adapt the the rear plate.
freecad 0.15(4671)
thingiverse
free
Bowser/Varney Aerotrain passenger interior/chassis by DarthSantaFe
...s fit together well using super glue (ca), and the assembled chassis simply presses into the body and stays in place by friction.
thingiverse
free
Rear axle holder right and pinion gear for OpenRC Formula 1 car by LuisDUgena
...luisdugena
thingiverse
a modified version of the real axle holder (right) and pinion gear to fit propodrive 28-36s 2200kv motor.
thingiverse
free
Axle with smaller shaft hex by kelvin1997
...39;s printer settings are different. please do not hold me responsible for the inaccuracy. play with the resizing a bit yourself.
Biline
thingiverse
free
Nuke Fidget Spinner by biline
... the balls in the bearing) mine were a plastic of some kind and easy to remove, removing it increased spinning time to 2 minutes!
thingiverse
free
Fully Printable chopper by biline
...e to these pieces and glue directly to the tires.
hopefully these little changes makes it a bit easier to print for someone else.
thingiverse
free
Mini Monster Willy with rotating wheels by biline
...instead (great for me maybe not for others)
i probably missed some info or forgot something so i'll update and fix when i can
cg_trader
$4
Heating radiator BiLiner Noir Sable
...d by the z axis to the wall. radiator battery bimetallic curved black white silver royal thermo furniture thermostat heater other
grabcad
free
'SamiCo' Multi CNC-Lazer-3D Printer All-in-one (Cube Style)
...-toplam ölçüleri : 540x540x700mm
-yazma özellikleri : 400x400x 380mm
-ortama ağırlık : 25-30 kg
-yaklaşık maliyet : 4000-5000 tl
3dwarehouse
free
Радиатор Royal Thermo BiLiner 500 - 10 секц.
...ет. секции сгруппированы можно удалить или добавить по желанию. #радиатор #royal #роялтермо #биметал #biliner #батарея #отопление
3dwarehouse
free
Fluidized AquariumSand Filter
...fluidized aquariumsand filter 3dwarehouse fluidized sand filter with biline tubing from pump and undergravel filter. 900 gph pump...
Windup
turbosquid
$46
Russian Windup Toy Robot
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$14
Tin Robot 3D Model
...tin robot 3d model 3dexport tin toy wind up windup robot vintage collector tin robot 3d model zarday321 602...
3d_export
$29
Tin Robot toy 3D Model
...3dexport tin toy robot retro vintage antique collectable wind windup clockwork tin robot toy 3d model zarday321 11982...
cg_studio
$14
Tin Robot Toy3d model
...tin robot toy3d model cgstudio characters tin wind up windup toy robot antique .max - tin robot toy 3d...
thingiverse
free
Windup spinner by SiberK
...windup spinner by siberk
thingiverse
windup spinner.
when too lazy to rotate it.
video: https://youtu.be/8dwulpt3tjk
thingiverse
free
Windup Key for Starwars Toy by jkaero
...is is a new windup key for some vintage starwars windup toys...it probably fits other things as well. the square shaft is 2.5mm.
thingiverse
free
Windup Walker Negative by tbuser
... a negative space object that can be used to do a boolean difference on other models to cut a slot and attach windup walker legs.
thingiverse
free
Windup Earphone Holder by Boss00
...ds both side walls together that can be adjusted by loosing to windup various size cords and tightened to keep the cord in place.
thingiverse
free
Windup motor Car toy by brico3d
...ar toy by brico3d
thingiverse
car toy with windup motor.
watch: https://youtu.be/rhzidstqjvm
visit: https://brico3d.blogspot.com
thingiverse
free
Windup Walker mechanism model by jfeaver
...windup walker mechanism model by jfeaver
thingiverse
cad model of the windup walker to use when make your own walker robot.
Mode
turbosquid
$29
Differential mode
...oyalty free 3d model differential 3d mode for download as iam on turbosquid: 3d models for games, architecture, videos. (1293829)
turbosquid
$45
Monk 3d mode
...rbosquid
royalty free 3d model monk 3d mode for download as on turbosquid: 3d models for games, architecture, videos. (1483647)
3d_ocean
$15
Naruto, Sage Mode
...ate with 3dsmax 2011. in max files, material/texture are standard material and mentalray material. preview rendered with 3dsma...
3ddd
free
Eichholtz La Mode
... лампа с тканевым абажуром, основа металлическая.http://www.eichholtz.com/lamp-table-la-mode-nickel-0085002626114.aspx
turbosquid
$45
Tyrannos mode 6_max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Tyrannos mode 5_max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Tyrannos mode 4_max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Tyrannos mode 3_max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Tyrannos mode 2_max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Tyrannos mode 1_max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Dual
turbosquid
free
Dual Pistols
...ls
turbosquid
free 3d model dual pistols for download as fbx on turbosquid: 3d models for games, architecture, videos. (1320360)
turbosquid
$2
Dual Axe
...urbosquid
royalty free 3d model dual axe for download as fbx on turbosquid: 3d models for games, architecture, videos. (1332372)
turbosquid
$10
Dual Lesaths
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
плитка Dual Bianco (Испания)
...й плитки venis dual (испания). технические качества: устойчивость к стирания, отличная геометрия, отсутствие проблем при укладке.
turbosquid
$35
Dual Mesh Fonts
...ree 3d model dual mesh fonts for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1352989)
turbosquid
$29
Dual Flask with Bungs
...del dual flask with bungs for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1210512)
turbosquid
$19
Dual Socket Plug
...3d model dual socket plug for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1303912)
turbosquid
$13
Dual Adjustable Pulley
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Amoi N809 Dual
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Dual Turret Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Windows
3d_ocean
$3
Window
...window
3docean
window
a lowpoly window .
3d_ocean
$2
Window
...window
3docean
window
a lowpoly window.
3d_ocean
$2
Window
...window
3docean
window
a lowpoly window.
3d_ocean
$2
Window
...window
3docean
window
a lowpoly window .
3d_ocean
$5
Window
...window
3docean
window
a high quality window.
3d_ocean
$4
Window
...window
3docean
window
a high quality window.
3d_ocean
$4
Window
...window
3docean
window
a high quality window.
3d_ocean
$4
Window
...window
3docean
window
a high quality window.
3d_ocean
$3
Window
...window
3docean
window
a high quality window.
3d_ocean
$3
Window
...window
3docean
window
a high quality window .
Car
3d_export
$5
car
...car
3dexport
luxury car high quality car
3d_export
$5
car
...car
3dexport
luxury car high quality car
3d_export
$5
car
...car
3dexport
luxury car high quality car
3d_export
$5
car
...car
3dexport
luxury car high quality car
3d_export
$5
car
...car
3dexport
luxury car high quality car
archibase_planet
free
Car
...
archibase planet
car sports car motor-car sportster
car nascar#1 n300114 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Car
...ibase planet
car motor-car sportster sports car
car gablota xform n190214 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Car
...car
archibase planet
car motor car transport
car vaz 2104- 3d model for interior 3d visualization.
3d_export
$15
car
...car
3dexport
car
3d_export
free
car
...car
3dexport
car