Thingiverse
Dual Direct Drive all in one for E3D V6. Reprap Prusa i3 rework by Amadon
by Thingiverse
Last crawled date: 3 years ago
EDIT 6/6/16 Added new version of the idlers. These new idlers have support for the bearings on both sides so it can't bend over and lose clamping pressure on the filament.
There's a 0.4mm thick support material built in that you must cut out. No support needed from your slicer. Use a washer on BOTH sides of the roller bearing. Low profile nut of course. The flat side of the idlers should face towards the motors. Slightly raised sides towards the front. Put the nut on the motor side.
Check out the new compact version of this here ----> http://www.thingiverse.com/thing:734851
I combined the extruder part for a dual extruder into one part so it was easier to get both E3D hot ends to be at the same point on the Y-axis. I had issues when it was just the carriage holding the motors from the back with the nozzles not lining up. It's not a perfect solution but it helps a LOT. I think the only way to get the nozzles perfectly aligned would be to make a metal part that fastens between some of the lower ribs on the cold part of the extruders and somehow attaches to this assembly. I will probably continue working on this for that reason.
This assembly was a tradeoff because I had to get rid of the mounts for auto bed leveling that were on the original single version. This also puts the idler lever for the left extruder opposite so you can get at it easier.
Use this with my dual motor mount X-carriage: http://www.thingiverse.com/thing:497661
Follow the instructions for screws and parts from this remix I made: http://www.thingiverse.com/thing:524249
If you put your first extruder on the left (the reversed side) you must reverse the direction it turns the shaft to extrude plastic. That's what I'm showing you in the last picture. I run Marlin firmware so this is a screenshot from configuration.h
EDIT1: I designed an X-Carriage that lifts the nozzles to juuuuuust blow the lower edge of itself to gain some Z height, and it works but has issues that I had to grind away some of it to use it. So if you like this design but don't like how high your x axis sits when it's all the way down (wasting printable height) please be patient. I will be posting a new version of the X-carriage for this that lifts everything higher very soon.
EDIT2: I finished the tall dual X-carriage and added the file here. I had to cutaway some of the retaining structures for two of the bearings, and have not printed this yet, but I am positive it will work fine. Support material will be required though. I did print an earlier version of this carriage and am using it and it works fine. It was just hard to get some of the screws in it so I had to manually remove the parts this model has removed for you. Make sure is you use screws to hold the bearings tight that the lowest ones have low profile heads or they will be lower than the extruder nozzles and hit your print bed. The clearance is intentionally small to give you as much print height as possible. Message me or comment if you have any questions!
EDIT3: Added an idler assembly for 22mm roller bearings with a 24mm washer on either side to keep the belt on the X-axis from slipping off.
The idler included here fits this: http://www.thingiverse.com/thing:372056
Here is a parts list for the idler.http://www.mcmaster.com/#97725a700/=uytwzxhttp://www.mcmaster.com/#91116a160/=uytx5phttp://www.mcmaster.com/#6661k82/=uyu075http://www.mcmaster.com/#93070a177/=uytzshhttp://www.mcmaster.com/#90710a120/=uytze4
EDIT4: I am just about done designing a new dual extruder where the motors are across from each other instead of side by side, so it won't reduce your printable width. I'll be uploading that as soon as I print it and make sure it works! http://i.imgur.com/AemkbI0.png
There's a 0.4mm thick support material built in that you must cut out. No support needed from your slicer. Use a washer on BOTH sides of the roller bearing. Low profile nut of course. The flat side of the idlers should face towards the motors. Slightly raised sides towards the front. Put the nut on the motor side.
Check out the new compact version of this here ----> http://www.thingiverse.com/thing:734851
I combined the extruder part for a dual extruder into one part so it was easier to get both E3D hot ends to be at the same point on the Y-axis. I had issues when it was just the carriage holding the motors from the back with the nozzles not lining up. It's not a perfect solution but it helps a LOT. I think the only way to get the nozzles perfectly aligned would be to make a metal part that fastens between some of the lower ribs on the cold part of the extruders and somehow attaches to this assembly. I will probably continue working on this for that reason.
This assembly was a tradeoff because I had to get rid of the mounts for auto bed leveling that were on the original single version. This also puts the idler lever for the left extruder opposite so you can get at it easier.
Use this with my dual motor mount X-carriage: http://www.thingiverse.com/thing:497661
Follow the instructions for screws and parts from this remix I made: http://www.thingiverse.com/thing:524249
If you put your first extruder on the left (the reversed side) you must reverse the direction it turns the shaft to extrude plastic. That's what I'm showing you in the last picture. I run Marlin firmware so this is a screenshot from configuration.h
EDIT1: I designed an X-Carriage that lifts the nozzles to juuuuuust blow the lower edge of itself to gain some Z height, and it works but has issues that I had to grind away some of it to use it. So if you like this design but don't like how high your x axis sits when it's all the way down (wasting printable height) please be patient. I will be posting a new version of the X-carriage for this that lifts everything higher very soon.
EDIT2: I finished the tall dual X-carriage and added the file here. I had to cutaway some of the retaining structures for two of the bearings, and have not printed this yet, but I am positive it will work fine. Support material will be required though. I did print an earlier version of this carriage and am using it and it works fine. It was just hard to get some of the screws in it so I had to manually remove the parts this model has removed for you. Make sure is you use screws to hold the bearings tight that the lowest ones have low profile heads or they will be lower than the extruder nozzles and hit your print bed. The clearance is intentionally small to give you as much print height as possible. Message me or comment if you have any questions!
EDIT3: Added an idler assembly for 22mm roller bearings with a 24mm washer on either side to keep the belt on the X-axis from slipping off.
The idler included here fits this: http://www.thingiverse.com/thing:372056
Here is a parts list for the idler.http://www.mcmaster.com/#97725a700/=uytwzxhttp://www.mcmaster.com/#91116a160/=uytx5phttp://www.mcmaster.com/#6661k82/=uyu075http://www.mcmaster.com/#93070a177/=uytzshhttp://www.mcmaster.com/#90710a120/=uytze4
EDIT4: I am just about done designing a new dual extruder where the motors are across from each other instead of side by side, so it won't reduce your printable width. I'll be uploading that as soon as I print it and make sure it works! http://i.imgur.com/AemkbI0.png
Similar models
thingiverse
free
X-Carriage for Jim's Flying Motor Mount Dual Extruder by doctek
... for dual nozzle cooling fans. a print cooling solution will be coming soon.
can actual dual-extrusion printing be far behind?
thingiverse
free
Ron's Dual Extruder by raldrich
..., so that the point where the extruder is mounted to the carriage is separated from where the hot end is mounted to the extruder.
thingiverse
free
Dual Nozzle Carriage for Flsun Cube by Coscatgon
...n of this.
it should work with the chimera and cyclops dual hotends and clones of them.
please do let me know if you print this!
thingiverse
free
Prusa Dual Extruder Dual Fan X Carriage, Fan Duct, Fan Mounts by QuantumConcepts
...duct skp.
added fan mount cover in case a fan has to be taken out of commission so air does not escape where the fan was mounted.
thingiverse
free
Leapfrog Creatr E3D V6 X Carriage redesign by TheCrut
... this thing because the e3d fan is so loud:https://www.thingiverse.com/thing:2193695
file name is e3dv6_coldend_40mmfan_holder_v2
thingiverse
free
Prusa I3 MK2(s) alternative nozzle fan & cooling design by Knickohr
...d.com/forum/improvements-f14/alternative-nozzle-cooling-t4395.html
update :
fixed another belt rubbing at the x-carriage (part 3)
thingiverse
free
Yet another extruder idler arm (623 bearing) by technophobe
...ment guide to work with a 623 bearing i had left over from building twotimes' lowrider. http://www.thingiverse.com/thing:4213
thingiverse
free
X- carriage 2-h fan for 3D Printer Reprap Prusa Mendel i2 by LeonM
...bearing lm8uu. fans have settings for convenient use.
x-idler end x-motor i used from here http://www.thingiverse.com/thing:22887
thingiverse
free
Universal X Carriage for single and double extruder Prusa i3 Sunhokey by stevan
...unt (single or double), dual extruder clamp and servo and arm for auto bed leveling from: http://www.thingiverse.com/thing:793689
thingiverse
free
Bondtech BMG MK3S and MK3 Bear X Axis BLTOUCH NO SENSOR
...t height between the sensor tip and the nozzle, i've provided the step file.
the offset of the bltouch is 30mm on the x axis.
Amadon
thingiverse
free
Amadon's Double Bowden Direct Drive Extruder 1.75mm filament by Amadon
...e flat side of the idlers should face towards the motors. slightly raised sides towards the front. put the nut on the motor side.
thingiverse
free
2040 Extrusion Coupler by Amadon
...ed 24 of each.
i added a 0.5mm gap all the way around the inside to compensate for printers printing inside dimensions too small.
thingiverse
free
Extruder Body for Amadon's Cyclops and Chimera Direct Drive by cerebrate
...to hold a bltouch bed leveling sensor.
for all other details and instructions, please see the original and details given therein.
thingiverse
free
X Axis Leveling tool Lengthened and cleaned up by Amadon
...so cleaned up the profile a bit and widened the arc that rests on the y rods by 0.2mm and shaped it so it should lock into place.
thingiverse
free
Amadon's Cyclops and Chimera Direct Drive Version 3 by Amadon
...y if they come loose you don't have to disassemble anything to tighten them again.https://www.youtube.com/watch?v=t9ya5-5jxgc
thingiverse
free
Amadon's Prusa i3 - Wilson hybrid complete printer by Amadon
...y if they come loose you don't have to disassemble anything to tighten them again.https://www.youtube.com/watch?v=t9ya5-5jxgc
thingiverse
free
Z endstop Prusa I3 by gestras
...i3. reduce to fit with e3d chimera mount on amadon#39;s cyclops and chimera direct drive version...
thingiverse
free
Modified dual extruder X-carriage for Direct-drive hinged extruder for E3D/J-Head hot-end (Prusa i3) by Amadon
...gher to save print height and extended the frame for them. i also added a fourth bearing spot for a theoretically smoother ride.
thingiverse
free
E3D V6 Single Direct Drive System by Amadon
...9mm outer diameter so i had to widen the inside diameter of the washer with a dremel. http://www.mcmaster.com/#93475a230/=wnnbco
thingiverse
free
D-Bot CoreXY Printer with Extra Large 17"X17" Build Plate by Amadon
...omment i will probably miss it or not see it for a long time, so message me. or look me up on facebook. my name is amadon faul.
Reprap
turbosquid
$1
Go Pro Balance Hand Wand Reprap
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Reprap keychain by AndreasD
...reprap keychain by andreasd
thingiverse
a simple reprap logo keychain for the reprap lovers like me!
thingiverse
free
REPRAP CHASSIS by leonk
...reprap chassis by leonk
thingiverse
reprap chassis
thingiverse
free
COUPLER RepRap by leonk
...coupler reprap by leonk
thingiverse
coupler reprap
thingiverse
free
RepRap Switch by n3opl4n
...reprap switch by n3opl4n
thingiverse
switch for reprap prusa i2.
p-space hackerspace logo.
thingiverse
free
Reprap pendulum by mr_seeker
...ap pendulum by mr_seeker
thingiverse
its a pendulum in the shape of the reprap logo. it has a 1mm hole for putting a wire in it.
thingiverse
free
RepRap Ornament by redskinsjbs
...reprap ornament by redskinsjbs
thingiverse
i tried to make a teardrop shape ornament for the holiday season in honor of reprap
thingiverse
free
Spool holder reprap by mdnm
...spool holder reprap by mdnm
thingiverse
this is spool holder for reprap.
thingiverse
free
RepRap logo keyring by mrjohnc
...reprap logo keyring by mrjohnc
thingiverse
reprap logo keyring
thingiverse
free
REPRAP LEON K by leonk
...reprap leon k by leonk
thingiverse
reprap leon k
Rework
3d_export
$25
riva aquarama 1970
...visualization, as well as, if desired, it can be reworkd for 3d printing. in the near future, a model...
3d_export
$8
Mosaic 1 3D Model
...outdoor indoor vector ceramic glass mosaic decorative mosaic manually reworkd into a vector. the image is then modified in...
3d_export
$65
sci-fi scene for rendering restyling - tesla
...colors with the name, metal, light metal, dark metal, reworkd renders for preview and processed in photoshop using a...
3d_export
$22
a filter assembly and inspection line
...laser marking station (op40), one packaging station (op50), one rework and pump water detection station (op60), and two assembly...
3d_export
$19
muuto raw chair
...the muuto raw chair.<br>raw chair is a striking functional reworkng of a recognizable everyday object. a part of the...
3d_export
$12
desert rocks stock in blender
...in obj format (non-textured), together with the textures, for reworkng them in other programs.<br>notes: the scene include 12 simple...
3d_export
$10
arclinea principia
...the essence, with the basic principles of the kitchen, reworkd: new steel technology and natural wood cutting. the extraordinary...
thingiverse
free
Doughnut Rework by Johhnny
...doughnut rework by johhnny
thingiverse
i reworked tzani's mobius doughnut for dual extrusion.
thingiverse
free
Beanie the Transformer rework by Whirl55
...beanie the transformer rework by whirl55
thingiverse
found and reworked head pin
and all files
thingiverse
free
AM10 - am8 rework Y
...am10 - am8 rework y
thingiverse
totaly rework to turn your am8 into an am10 with only 2 pieces
E3D
turbosquid
$23
E3D - Google Home
... 3d model e3d - google home for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1192509)
cg_studio
free
e3d model
...e3d model
cgstudio
- e 3d model, royalty free license available, instant download after purchase.
turbosquid
$2
Syringe C4D (E3D Ready)
...lty free 3d model syringe c4d (e3d ready) for download as c4d on turbosquid: 3d models for games, architecture, videos. (1336720)
turbosquid
$12
Microphone USB E3D and C4D
...ree 3d model microphone usb e3d & c4d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1568216)
turbosquid
$29
E3D - OnePlus 6 Black
...model e3d - oneplus 6 black for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358534)
turbosquid
$29
E3D - Motorola One 2018
...del e3d - motorola one 2018 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1358533)
turbosquid
$29
E3D - Disney MagicBands 2
...l e3d - disney magicbands 2 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1355515)
turbosquid
$29
E3D - Samsung Z4 Smartphone
...e3d - samsung z4 smartphone for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1182179)
turbosquid
$23
E3D - Razer Phone model
...del e3d - razer phone model for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1231207)
turbosquid
$23
E3D - Alcatel Idol 5
... model e3d - alcatel idol 5 for download as max, obj, and c4d on turbosquid: 3d models for games, architecture, videos. (1212799)
V6
3d_export
$100
v6 engine
...engine
3dexport
complete v6 engine modeled on solidworks 2017 along with .stl, .sldprt and .sldasm of all th parts and assembly.
3d_export
$10
V6 engine
... the first v6 engines were designed and produced independently by marmon motor car company, deutz gasmotoren fabrik and delahaye.
3d_export
$35
v6 engine
...s a complete model of a v6 engine containing over 400 components. you can contact me for a video of all the components assembling
3d_export
$10
v6 engine
...v6 engine
3dexport
turbosquid
$25
Bed1001-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$22
Chair2-v6
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
V6.mb
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$20
V6 engine
...rovided in this package is all the parts in sldprt format and assembly in sldasm format. i can also convert the format on demand.
3ddd
$1
Стол V6
...6" в стиле дизельпанк изготовлен из блока двигателя, 4х поршней и 4х шатунов.
столешница изготовлена из стекла толщиной 8мм.
cg_studio
$199
V6 VVTi3d model
...v6 vvti3d model
cgstudio
.3ds - v6 vvti 3d model, royalty free license available, instant download after purchase.
I3
3d_export
$10
suv i3
...suv i3
3dexport
suv i3 2013 series
3d_ocean
$89
BMW i3 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 20143d model
...
cgstudio
.3ds .c4d .fbx .lwo .max .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20123d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2012 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20143d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
humster3d
$75
3D model of BMW i3 2014
...
buy a detailed 3d model of bmw i3 2014 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$40
3D model of Kitchen Set I3
...uy a detailed 3d model of kitchen set i3 in various file formats. all our 3d models were created maximally close to the original.
3d_ocean
$30
Kitchen set i3
...ensils oven plates shelves sink table ware
kitchen set i3 include 3d models: cooker, oven, sink, cupboards, table, chair, plates.
3d_ocean
$89
BMW i3 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 Concept 20113d model
...i3
.3ds .c4d .fbx .lwo .max .obj - bmw i3 concept 2011 3d model, royalty free license available, instant download after purchase.
Dual
turbosquid
free
Dual Pistols
...ls
turbosquid
free 3d model dual pistols for download as fbx on turbosquid: 3d models for games, architecture, videos. (1320360)
turbosquid
$2
Dual Axe
...urbosquid
royalty free 3d model dual axe for download as fbx on turbosquid: 3d models for games, architecture, videos. (1332372)
turbosquid
$10
Dual Lesaths
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
плитка Dual Bianco (Испания)
...й плитки venis dual (испания). технические качества: устойчивость к стирания, отличная геометрия, отсутствие проблем при укладке.
turbosquid
$35
Dual Mesh Fonts
...ree 3d model dual mesh fonts for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1352989)
turbosquid
$29
Dual Flask with Bungs
...del dual flask with bungs for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1210512)
turbosquid
$19
Dual Socket Plug
...3d model dual socket plug for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1303912)
turbosquid
$13
Dual Adjustable Pulley
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Amoi N809 Dual
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Dual Turret Tank
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Prusa
turbosquid
$2
Frame Filament Guide Clip-On for Prusa Mk3
...rame filament guide clip-on for prusa mk3 for download as stl on turbosquid: 3d models for games, architecture, videos. (1634730)
3d_export
free
prusa i3 mk3s laser mount for opt lasers
...to learn more about the blue laser technology that conceived the cutting and engraving laser heads from opt lasers, please visit:
turbosquid
free
Prusa small printer adapter holder
...er for download as ipt, skp, dwg, dxf, fbx, ige, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1642936)
3d_export
$30
geisha by jonathan adler
...** i did a 3d printing test in the prusa software, you can find it among the attached images.<br>exchange:<br>.blend...
thingiverse
free
Prusa without Prusa (rc2) by madless
...prusa without prusa (rc2) by madless
thingiverse
just the main part of prusa rc2 faceshield, without writing.
enjoy :)
thingiverse
free
Prusa by acejbc
...prusa by acejbc
thingiverse
prusa knob info
m3 8mm screw
thingiverse
free
Prusa house
...prusa house
thingiverse
how prusa house could look like...
thingiverse
free
Prusa Mk2 "Fake Prusa" LCD cover by anraf1001
...r by anraf1001
thingiverse
version of prusa's lcd cover with "fake prusa" instead of "original prusa"
thingiverse
free
Prusa stabilizator by gutiueugen
...prusa stabilizator by gutiueugen
thingiverse
prusa stabilizator
thingiverse
free
Keychain Prusa by rbarbalho
...keychain prusa by rbarbalho
thingiverse
keychain with text prusa.
Direct
design_connected
free
Compas Direction
...compas direction
designconnected
free 3d model of compas direction by vitra designed by prouvé, jean.
design_connected
$18
Direction Pivotant
...direction pivotant
designconnected
vitra direction pivotant computer generated 3d model. designed by prouvé, jean.
turbosquid
$6
not direct the front
...oyalty free 3d model not direct the front for download as max on turbosquid: 3d models for games, architecture, videos. (1213034)
turbosquid
$10
Rails Direct
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Picto toilet directions
...lude 3d files next to rhino6: x3dv, step, igus, obj and stl. double-sided, flipping changes the gender directions to the toilets.
3ddd
$1
fauteuli direction
...d
chair , vitra , fauteuli
fauteuli vitra chair
design_connected
$18
Fauteuil Direction, 1951
...fauteuil direction, 1951
designconnected
vitra fauteuil direction, 1951 computer generated 3d model. designed by prouvé, jean.
3d_export
$5
Directional tactile 3D Model
...tactile 3d model
3dexport
directional tactile braille tile flooring interior
directional tactile 3d model renob000 71068 3dexport
turbosquid
$26
Radio direction finder A
...ty free 3d model radio direction finder a for download as fbx on turbosquid: 3d models for games, architecture, videos. (1212490)
turbosquid
$7
Wooden direction signage
...ty free 3d model wooden direction signage for download as max on turbosquid: 3d models for games, architecture, videos. (1453747)
Drive
turbosquid
$90
Drive
...turbosquid
royalty free 3d model drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1654393)
3d_export
$10
cycloidal drive
...cycloidal drive
3dexport
cycloidal drive
3d_ocean
$5
Flash Drive
...h drive included : – materials – scene ( lighs / room ) – .c4d + .obj for any questions please feel free to contact me thank you.
3d_ocean
$5
Usb drive
...s shaders and a lighting setup. it also has a small animation of it going in and out. i saved it out as both a .blend file and...
3d_ocean
$5
Pen Drive
...est computer drive game model good low poly new pen pen drive textured unwrapped uv very low poly
a very beautiful low poly model
3d_ocean
$10
External hard drive
... is a detailed model of a trekstor external hard drive. you can easily modify the label on the top. simply edit the text objects.
turbosquid
$60
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1254314)
turbosquid
$50
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1263524)
turbosquid
$45
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1287060)
turbosquid
$40
Star Drive
...squid
royalty free 3d model star drive for download as blend on turbosquid: 3d models for games, architecture, videos. (1261902)
One
turbosquid
$2
one plus one
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
One
...one
3ddd
стул
офисный стул one
3ddd
free
one
...
palazetti one ,http://palazzetti.ca/index.php/component/virtuemart/seating/armchairs-lounges/one-chair-detail?itemid=0
turbosquid
$35
One A
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
One
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Стул One
...стул one
3ddd
one , magis
кресло magis s.p.a , one
3ddd
$1
Стул One
...стул one
3ddd
one , magis
кресло one chair (4star), magis s.p.a.
3d_export
$20
xbox one
...xbox one
3dexport
xbox one
3ddd
$1
xbox one
... консоль , джойстик
xbox one + kinect + gamepad
3ddd
free
One
...nstantin grcic
артикул ct-284 (cosmorelax.ru)
размер l36xw41xh82.5, sh 77cm
цвет черный, красный
материал алюминий
вес 2,5 кг
All
turbosquid
$20
all
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
all
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$29
All-Two
...all-two
designconnected
bonaldo all-two computer generated 3d model. designed by bicego, sergio.
design_connected
$29
All-One
...all-one
designconnected
bonaldo all-one computer generated 3d model. designed by bicego, sergio.
design_connected
$16
Holly All
...holly all
designconnected
serralunga holly all computer generated 3d model. designed by starck, philippe.
3d_export
$15
all terrain
...all terrain
3dexport
turbosquid
$29
Holly All
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Fireplace (All)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Fireplace (All)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
Fireplace (All)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.