Thingiverse
Dual 18650 charger by RGN01
by Thingiverse
Last crawled date: 3 years ago
My son needed a charger for 18650 batteries for his bicycle light so I designed this. Printed in PLA, it uses a 1.3mm DC input socket, 2x 1-cell LiPo charger boards, battery connectors (2x springs and 2x end plates), a 5V DC wall wart, a length of ribbon to remove the batteries, some adhesive or double-sided tape and some hookup wire.
The charger boards I used are http://www.aliexpress.com/item/1Pcs-Dual-TP4057-Lithium-Battery-1-A-LED-Charging-Board-Reverse-Connect-Protect/32368102064.html and the DC socket is eBay item 321179995395.
The charger boards I used are http://www.aliexpress.com/item/1Pcs-Dual-TP4057-Lithium-Battery-1-A-LED-Charging-Board-Reverse-Connect-Protect/32368102064.html and the DC socket is eBay item 321179995395.
Similar models
thingiverse
free
DIY Powerbank using IP5328P and 18650 Batteries by secures
...quickcharge and usb pd.
bom:
1x ip5328p charger board
5x 18650 li-ion battery
6x m2x6 socket head screw
4x m3x6 socket head screw
thingiverse
free
18650 battery charger (micro USB version) by marekl123
...d some extended description about the build process and the ics on the charger board: http://ezcontents.org/18650-battery-charger
thingiverse
free
battery charger 18650 by caracolgeek
...8650 by caracolgeek
thingiverse
i give you my vision of a 18650 li-ion battery charger, designed for use with the tp 4056 board.
thingiverse
free
PowerBank case (3S5P)
... support.
battery level (charge meter) indicator for 3s batterys
power socket (f-jack, 2.5x6mm)
3 amp micro power switch (15x8mm)
thingiverse
free
18650 Battery charger by umutcankaymak
...18650 battery charger by umutcankaymak
thingiverse
i used tp4056 lithium charger board, m5 bolts and nuts
thingiverse
free
board for Dual USB Battery charger by WhDr by WhDr
...express.com/item/32793698670.htmlhttps://www.aliexpress.com/item/32858083815.htmlhttps://www.aliexpress.com/item/32848750231.html
thingiverse
free
Boxmod for x2 18650 vape by HowToDo
...for charger board
button 12mm - http://ali.pub/176c2f
510 connector - http://ali.pub/176c46
charger board - http://ali.pub/176c4d
thingiverse
free
Dual charger battery 18650 cradle by Rustam112
...o-usb-18650-lithium-battery-charging-board-charger-module-protection-dual-functions/32467859026.html?spm=2114.13010608.0.0.uxfvfx
thingiverse
free
18650 Li-Ion Charger
...rger board (usb-c)
things you need:
charger board with usb-c link
battery terminal link
two self tapping screws 2.5x10
some wires
thingiverse
free
12000 mA/h 18650 Battery Pack and dual USB recharger by masteruan
...2.1 a. i charge the last model ipad and also the iphone 5/6 or samsung s7. i use this also like a power bank for my iron welder.
Rgn01
thingiverse
free
Arduino Uno templates by RGN01
...basic arduino uno templates is designed to help laying out housings and mounting and can be used as a drilling template or guide.
thingiverse
free
Batman keyring by RGN01
...ution-noncommercial-sharealike 4.0 international license. see http://creativecommons.org/licenses/by-nc-sa/4.0/ for more details.
thingiverse
free
Doorbell by RGN01
...er one will sound the bell. i also included a small spring between the stripboard and rear of the button, and a 3mm led, on mine.
thingiverse
free
Basin overflow by RGN01
...ution-noncommercial-sharealike 4.0 international license. see http://creativecommons.org/licenses/by-nc-sa/4.0/ for more details.
thingiverse
free
Manrose Quiet Fan muffler by RGN01
...uiet - with quite a lot of mechanical noise even after a bearing change.. this clip-on muffler helps reduce the mechanical noise.
thingiverse
free
SR501 PIR Mount by RGN01
...ution-noncommercial-sharealike 4.0 international license. see http://creativecommons.org/licenses/by-nc-sa/4.0/ for more details.
thingiverse
free
Solder reel stand by RGN01
...place for easy transportation.
self-adhesive 12.7mm (1/2 inch) silicone rubber kitchen door buffer pads make great non-slip feet.
thingiverse
free
PG1050 Battery case by RGN01
...s in slightly while it was still hot from the heated bed worked very well to get the tension just right.
hope you find it useful.
thingiverse
free
Multimeter wall bracket by RGN01
...ution-noncommercial-sharealike 4.0 international license. see http://creativecommons.org/licenses/by-nc-sa/4.0/ for more details.
thingiverse
free
Spice Rack - minimalist by RGN01
...ution-noncommercial-sharealike 4.0 international license. see http://creativecommons.org/licenses/by-nc-sa/4.0/ for more details.
18650
thingiverse
free
18650
...18650
thingiverse
18650 power supply, vase mode
thingiverse
free
18650 CASE
...18650 case
thingiverse
18650 case!
thingiverse
free
18650 holder
...18650 holder
thingiverse
18650 holder
thingiverse
free
18650 dispenser
...18650 dispenser
thingiverse
18650 dispenser for 10 batteries.
thingiverse
free
18650 Case
...18650 case
thingiverse
a simple case for an 18650 with a simple cap
thingiverse
free
18650 Case
...18650 case
thingiverse
this is a two battery case, designed for an 18650 battery
thingiverse
free
18650 Dispenser by h_h4nzo
...18650 dispenser by h_h4nzo
thingiverse
18650 dispenser for ten 18650 batteries
thingiverse
free
18650 Holder
...18650 holder
thingiverse
battery holder for an 18650. uses an m4 bolt as the contact.
this is a work in progress
thingiverse
free
10x 18650 Storage // 10x 18650 Lagerung
....-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-
10x 18650 lagerung
habt spass, liked, und teilt eure makes...
sg
thingiverse
free
18650 Akku Slide, for 10x 18650, by Explosiveartwork
...explosiveartwork
thingiverse
a self constructed akku slide for 10x 18650! print it in the high for no support between 50-100mm/s
Charger
thingiverse
free
charger by Iynd1
...charger by iynd1
thingiverse
charger
thingiverse
free
Charger support
...r support
thingiverse
this is a support to hold the devices connected to the charger.
the charger for which was designed is iqos
thingiverse
free
Charger Shroud - For Surface Chargers by SamW-MSc
...roken surface chargers. fits over the charger snug. use to hide away exposed wires, if the end of your surface charger is broken.
thingiverse
free
Charger
...charger
thingiverse
draw the plan to cut it by the lasercutter
thingiverse
free
Wireless charger stand for economic charger
...ct it to the charger
3) fit the charger in the base.
dimensioned for my mi mix 2 s, but compatible with virtually any smartphone.
thingiverse
free
Charger Holder
...charger holder
thingiverse
wrap your charger around the thing and hook the end into the gap.
thingiverse
free
Charger Locker
...r into the sleeve, plug the charge/sleeve combo into the wall, and replace the screw. ( will require longer screw of your choice)
thingiverse
free
charger organizer by christianmingioni
...charger organizer by christianmingioni
thingiverse
charger organizer
thingiverse
free
Charger Cable Clip
...charger cable clip
thingiverse
i made this to organize my charger cables, like a laptop, phone charger, etc.
thingiverse
free
Charger CGR-3K
...charger cgr-3k
thingiverse
charger cgr-3k
Dual
thingiverse
free
Dual 4010
...dual 4010
thingiverse
dual fan 4010
thingiverse
free
dual color cone for testing dual extruders by lovethepirk
...dual color cone for testing dual extruders by lovethepirk
thingiverse
dual color cone for testing dual extruders
thingiverse
free
Dual hook by duxdhell
...dual hook by duxdhell
thingiverse
dual hook
thingiverse
free
Headsetholder dual by J3M
...headsetholder dual by j3m
thingiverse
dual headset holder
thingiverse
free
Dual extruder by gustavorpinheiro
...dual extruder by gustavorpinheiro
thingiverse
this is a support for dual extruders.
thingiverse
free
Dual Plate by Jaimemarie
...dual plate by jaimemarie
thingiverse
toggle and dual outlet plate
thingiverse
free
Dual IEC by mrkrash
...dual iec by mrkrash
thingiverse
dual hotend with fine regulation
thingiverse
free
Dual Spinner by AidanSandersSAN
...dual spinner by aidansanderssan
thingiverse
a dual spinner i made in class.
thingiverse
free
Dual Spinner by groman
...dual spinner by groman
thingiverse
a quick remix of the tri spinner. a dual spinner!
thingiverse
free
Dual stepper mount
...dual stepper mount
thingiverse
dual stepper mount. drill mounting holes for printer