Thingiverse
Drybox pc4-m10 tap by starfusionmz
by Thingiverse
Last crawled date: 3 years, 4 months ago
Couldn't find a drybox tap I liked so I made my own.
I printed at 225 degrees. Apparently that temp creates the strongest prints for pla.
This needs a PC4-10 coupler.
To install drill a 8mm whole into container of choice. I believe this can be done one go with a brad point drillbit. If you don't have that than drill a pilot and keep getting bigger until you get to desired size.
Connect the PC4-10 plus the retainer. then use the nut to retain. You can use a 14mm wrench if you need more leverage.
I printed at 225 degrees. Apparently that temp creates the strongest prints for pla.
This needs a PC4-10 coupler.
To install drill a 8mm whole into container of choice. I believe this can be done one go with a brad point drillbit. If you don't have that than drill a pilot and keep getting bigger until you get to desired size.
Connect the PC4-10 plus the retainer. then use the nut to retain. You can use a 14mm wrench if you need more leverage.
Similar models
thingiverse
free
Crank head for a drilling lathe by Tommy_JTZ
... different for each machine. i invite you to do it manually when the thing will be printed.
you need to change the scale 1 to 10.
thingiverse
free
1/2" tap drill handle by cmceezee
...his thing to solve your current problem!
let us know how it worked for you! worked great for me and my 3/8" npt tap drill!
thingiverse
free
Dremel Drill Holder
...and rear supports can be printed on their sides.
you will need to run a 3 mm tap down the screw holes or use self tapping screws.
thingiverse
free
bowden fitting adapter (PC4-M6 to PC4-M10) by landspeed
... give it a bit room for filament to pass freely.
also maybe it would be useful to use brim, but i managed to print it without it.
thingiverse
free
beam compass by bobcap1957
...elf. i used supports "touching build plate" and a "raft" because of how the screw prints.
hope you enjoy it!
thingiverse
free
Third Hand Bases by maxchambers3
...light that i had to clamp down the base, but that is more effective, because then it can't move unless you want it to. enjoy!
thingiverse
free
Too stand for Irwin 80187 Tap and Drill Set by jullrey
...ght on my workbench for easy access and now i don't knock them all out of the package whenever i need to use one of the sets.
thingiverse
free
Why another drill bit holder? by WillemvD
...it breaks, there is one spare, except fot 10 mm, these don't break that easy.
a 1mm drill is used for through hole pcb's.
grabcad
free
Small tap holder
...that fixes the small hand tap. you don't need to buy a holder just print it out. very simple. hope it can give you some help.
thingiverse
free
Root Beer Tap by jefffe
...ed support. i did not add the threads because in other taps i printed it was easier to just drill the thread out myself.
cheers!
Drybox
thingiverse
free
Filament Drybox Trockenbox
...filament drybox trockenbox
thingiverse
i use this drybox for the storagebox of my filament.
thingiverse
free
Gravity Rewinder Drybox
...files. any future updated files and instructions have moved to https://www.prusaprinters.org/prints/25858-gravity-rewinder-drybox
thingiverse
free
Drybox nozzle by Shiyaku
...drybox nozzle by shiyaku
thingiverse
for 1.75mm
thingiverse
free
Drybox filament passthrough port by GameFan
...d into the wall of a drybox through a 12mm - 13mm hole and screwed into place from the other side.
suitable for 1.75mm filament.
thingiverse
free
Drybox Filament Tap
... drybox and screw the parts together from both sides. optionally add a suitable o-ring or some silicone to increase airtightness.
thingiverse
free
Samla Drybox Spool Holders
...d spools for ikea samla 22l drybox. measure your tube diameter and use openscad or online custimizer to create required stl files
thingiverse
free
M8 rod holder for Drybox
...with counterpart by wtlx.
i changed the cutouts for the nuts to be on the inside parts.
holds an m8 rod. mounting hardware is m3.
thingiverse
free
Silica gel container for Ikea 365 drybox
...silica gel container for ikea 365 drybox
thingiverse
modified silica gel box without hygrometer for the drybox from twotone74.
thingiverse
free
Filament drybox Lid with Window by Lambcook
...filament drybox lid with window to enable the spool to be seen. glue clear plastic film, such as spool wrapping, over the window.
thingiverse
free
Hefty Drybox by hayseedbyte
...hefty drybox by hayseedbyte
thingiverse
just a quick base to hold pvc in the bottom of a hefty air-tight container.
Pc4
thingiverse
free
Bowden clamp pc4-m6 & pc4-m10 by straccio
...10.
i currently use old broken pc4-m10/6 without pneumatic part, in some cases i have added a whasher in order to hold the clamp.
thingiverse
free
PC4-M10 and PC4-M6 PTFE Bowden Coupling Nuts by jeremysears
...ars
thingiverse
pc4-m10 and pc4-m6 ptfe bowden coupler nuts. i used these for making a pass through for a filament storage box.
thingiverse
free
Tapered thread bowden coupling PC4-M6 PC4-M10
...de the printed part where the pc4-m6 or pc4-m10 goes. inside the fitting and i made the stripes that hold the bowden tube firmer.
thingiverse
free
PC4-M5 Idler by DanielCheang
...pc4-m5 idler by danielcheang
thingiverse
make pc4-m5 fixed in the end of the extruder
thingiverse
free
Supply system . For PC4-M6 by AlexDog
...supply system . for pc4-m6 by alexdog
thingiverse
supply system . for pc4-m6
thingiverse
free
PC4-M10 Pneumatic Fitting by leaftye
...pc4-m10 pneumatic fitting by leaftye
thingiverse
reference pc4-m10 fitting
thingiverse
free
bowden fitting adapter (PC4-M6 to PC4-M10) by landspeed
... give it a bit room for filament to pass freely.
also maybe it would be useful to use brim, but i managed to print it without it.
thingiverse
free
Tapered thread bowden coupling PC4-M6, PC4-M10 - Repaired by FDMTech
...b and were exported as binary stl's.
reason: there were some mesh issues with the pc4-m6 and pc4-m10 files.
have nice day! :)
thingiverse
free
Bowden Extruder PC4-M10 by MarcusVoss
....com/thing:2294078
because i didnt have the required pc4-m6 fittiing, i designed it to fit a pc4-m10.
the lever arm is unchanged.
thingiverse
free
PC4-01 replacement by Navakasi
...cement.
fitting by collet type.
no more breakage fitting. no more the backlash of the tube.
use the attic paper for more friction
M10
design_connected
$16
M10
...m10
designconnected
m10 computer generated 3d model. designed by norguet, patrick.
3ddd
$1
Cassina 397 M10
...cassina 397 m10
3ddd
cassina
кресло 397 m10 фабрики cassina.
www.cassina.com
turbosquid
$6
M10 Variant
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Ingram M10
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
M10 bolt
... bolt for download as png, dxf, ige, obj, pdf, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1431246)
3ddd
$1
Wooder Miola Model M10
...wooder miola model m10
3ddd
wooder , дверь
дверь wooder, коллекция miola, модель m10
3d_export
$5
M10 bolt nut 3D Model
...m10 bolt nut 3d model
3dexport
m10 bolt nut
m10 bolt nut 3d model prashantdshinde 77301 3dexport
turbosquid
$20
Samsung Galaxy M10
...del samsung galaxy m10 for download as max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1375304)
turbosquid
$20
Samsung Galaxy M10
...del samsung galaxy m10 for download as max, obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1375280)
3ddd
free
Cassina / 397 M10
...cassina / 397 m10
3ddd
cassina
patrick norguet
Tap
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap - 3d model for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap b1195 - 3d model for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap b1109 - 3d model for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
beer tap bar equipment
beer-tap - 3d model for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
faucet stop-cock tap
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
faucet tap stop-cock
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
stop-cock tap faucet
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
stop-cock tap faucet
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tap
...tap
archibase planet
tap stop-cock faucet
tap - 3d model (*.gsm+*.3ds) for interior 3d visualization.