Drone Hanger by kutzfpv

Last crawled date: 3 years ago

REVISION 2 NOTES
I modified the lip to print without support by turning it 90* onto its top. The version denoted with a 'c' has been designed to mount to the Command strip that is 13mm wide.
This is a simple hanger to hang your drone on the wall. It perfectly holds a 5" stretch X style racing quad. The ones I printed I did with 100% infill, but this much is most likely not necessary. I added the files for a "True-X" configuration of 5" racing quad. Select the file that fits the type of quad you want to hang with it.
To print a hanger for a 3" quad you can simply scale it by 60%. If your ESC's are on the arms I wouldn't suggest going any less than 90% on Z. When I printed it myself I did 60% on X, 70% on Y, and 90% on Z for my Catalyst Machineworks Superlight 3".
Print settings:
Support On