Thingiverse
Dovetail (Matchfit) by steve1973
by Thingiverse
Last crawled date: 3 years, 4 months ago
Remixed "Parametric customizable hand knob" (credit: cschwarz) to fit Hex Nut hardware specified by "Dovetail Track Nuts (MatchFit Style)" (credit: JAREDSMOOT) and further altered the knob to closely match original MatchFit hardware.
Hardware for Knob:
10-32 Hex Nuts - https://www.mcmaster.com/91841A195/
Alternate Sourcing Note: Hex Nuts are 3/8" across the flats and 1/8" deep.
Remixed "Dovetail Groove Hardware (MatchFit)" (credit:benjamenjohnson) to fit Hex Bolt hardware specified by "Dovetail Track Nuts (MatchFit Style)" (credit: JAREDSMOOT)
Hardware for Track Nut
10-32 x 1-1/2" Hex Bolts - https://www.mcmaster.com/92314A836/
Alternate Sourcing Note: Bolts are 5/16" across the flats and 1/8" deep.
Hardware for Knob:
10-32 Hex Nuts - https://www.mcmaster.com/91841A195/
Alternate Sourcing Note: Hex Nuts are 3/8" across the flats and 1/8" deep.
Remixed "Dovetail Groove Hardware (MatchFit)" (credit:benjamenjohnson) to fit Hex Bolt hardware specified by "Dovetail Track Nuts (MatchFit Style)" (credit: JAREDSMOOT)
Hardware for Track Nut
10-32 x 1-1/2" Hex Bolts - https://www.mcmaster.com/92314A836/
Alternate Sourcing Note: Bolts are 5/16" across the flats and 1/8" deep.
Similar models
thingiverse
free
Dovetail Track Hardware - Captured or Slotted Nut - Matchfit Style by chriscos
...with the official matchfit dovetail hardware.
this thing was inspired by https://www.thingiverse.com/thing:4557247 by @jaredsmoot
thingiverse
free
Dovetail Key Tracker & Knob by CarlLyman
...clamps that can be used in 1/2" dovetail grooves similar to microjig's matchfit clamps. included in this project are...
thingiverse
free
Dovetail Slot Hardware by theMachinista
...dard dovetail slot for your woodworking jigs. the parts require 10-32 flanged heatserts to finish, and 10-32 threaded rod to use.
thingiverse
free
Miter Jig by theMachinista
....5" hex screw.
knob and other assorted sliding dovetail hardware can be found here:https://www.thingiverse.com/thing:4828897
3dwarehouse
free
MATCHFIT Dovetail Hardware
...matchfit dovetail hardware
3dwarehouse
this is the three different pieces of matchfit dovetail hardware.
thingiverse
free
Tone Foregrip for SAE Hardware by JFlyer81
....25in. #10-32 bolt (actually maybe 1 inch is long enough, will have to test)
1x #10-32 nut
(should work fine with #10-24 as well)
thingiverse
free
Clamp It Square - Non-Embossing Large by muldaddy
...clamp it square - non-embossing large by muldaddy
thingiverse
remixed to work with the matchfit dovetail track clamps
grabcad
free
Smart Phone Housing for kayak
... a prototype of this model this summer and just ran video record constant, then captured still pics later, worked extremely well.
thingiverse
free
Picatinny Sling Mount by captainslug
...picatinny sling mount by captainslug
thingiverse
uses a 10-32 x 1-3/4" length bolt and hex nut.
grabcad
free
1/8" Ball End Hex Screwdriver
...
grabcad
1/8" hex drive with ball end that allows for 25 deg access angle, 6-5/8" oal, fits internal hex on 10-32 bhcs
Steve1973
thingiverse
free
Speed Square Wall Mount by steve1973
...e to slide in securely and be tight to the wall.
mount horizontally or vertically with two #8 wood screws (1 1/4" or longer)
thingiverse
free
Miter Slot Runner by steve1973
...aw.
this bar is 9.25" long and i was able to print it on my wanhao duplicator by laying this out diagonally on my print bed.
thingiverse
free
Prusa MK3S/MK3S+ LCD Cover by steve1973
...would show through. picture is without flash and lcd is fully lit. this blocks the light well and there's no bleed through.
thingiverse
free
Hardboard or Clear Plastic Box Corner by steve1973
...rner design. this one has two 1/4 inch holes so a clevis pin (1 3/4") and r-clip can be used to secure the boards in place.
thingiverse
free
Apple Magic Keyboard tall stand with hole for charge cable by steve1973
... stands to my keyboard with clear doubleside mounting tape and put some rubber feet on them so they wouldn't slip on my desk.
thingiverse
free
Craftsman Socket Organizer by steve1973
... to 19mm
hex sockets:
hex 375 - 3/8 inch drive for both standard and metric
hex 250 - 1/4 inch drive for both standard and metric
thingiverse
free
Dovetail/Matchfit Clamp Components by endi
...drew these up based on those. check out steve1973's (https://www.thingiverse.com/steve1973 post for greater detail, i will mention differences here....
Matchfit
thingiverse
free
Micro Jig MatchFit Stops by DikH
...ng a #10-24 x 0.5 inches round-headed screw and a washer.
there are some blanks in the sketchup file if you want to do your own.
thingiverse
free
Dovetail Track Hardware - Captured or Slotted Nut - Matchfit Style by chriscos
...with the official matchfit dovetail hardware.
this thing was inspired by https://www.thingiverse.com/thing:4557247 by @jaredsmoot
thingiverse
free
Dovetail/Matchfit Clamp Components by endi
...ally the model if this doesn't work well.
**remix link was not finding '4597335,' will edit and try to link up later.
thingiverse
free
Clamp It Square - Non-Embossing Large by muldaddy
...large by muldaddy thingiverse remixed to work with the matchfit dovetail track...
thingiverse
free
Miter Jig by theMachinista
...the jig to work in conjunction with my microjig matchfit hardware for clamping the jig and workpiece securely. but...
thingiverse
free
Dovetail Key Tracker & Knob by CarlLyman
...is a remix from benjamen johnson's "dovetail groove hardware (matchfit" https://www.thingiverse.com/thing:3728184 the knob is a remix from gp villamil's...
3dwarehouse
free
MATCHFIT Dovetail Hardware
...matchfit dovetail hardware
3dwarehouse
this is the three different pieces of matchfit dovetail hardware.
3dwarehouse
free
Matchfit Bench Overlay
...matchfit bench overlay
3dwarehouse
3dwarehouse
free
DIY MicroJig Matchfit Clamp
... matchfit clamp
3dwarehouse
diy clamp for micro jig matchfit system (microjig) using inexpensive bar clamp (e.g. harbor freight)
Dovetail
3ddd
$1
Dovetail Furniture
...dovetail furniture
3ddd
комод
dovetail furniture
3ddd
$1
Selva Console Louis XV
...cherry. veneered surfaces in cherry over blockboard. drawer with dovetail internal section of the drawer in solid ash, drawer...
3ddd
free
Travelers Desk Hutch
...a hardwood frame. finished in heirloom pine. features english dovetaild ...
3ddd
$1
RH MACHINTO
...precisely mitered frames 1 adjustable shelf per section 3 english-dovetaild drawers wipe with a soft, damp cloth; avoid the...
3ddd
$1
Модульная система Swallow
...project based on ancient techniques but with modern applications. dovetail joint, typical of most sought cabinetmakers, is powerfully elaborated...
3ddd
$1
Hooker Furniture Living Room Bombay Accent Chest
...capacity. all drawers have strong, time-tested english or french dovetail construction, for years of problem-free use. plywood drawer bottoms...
3ddd
$1
Hooker Furniture Living Room Three-Drawer Shaped Chest
...capacity. all drawers have strong, time-tested english or french dovetail construction, for years of problem-free use. plywood drawer bottoms...
3ddd
$1
Набор из 2-х столов Swallow
...project based on ancient techniques but with modern applications. dovetail joint, typical of most sought cabinetmakers, is powerfully elaborated...
3ddd
$1
Fretwork Chest-Pearl Essence
...capacity. all drawers have strong, time-tested english or french dovetail construction, for years of problem-free use. plywood drawer bottoms...
thingiverse
free
dovetails
...dovetails
thingiverse
fingerzinken