Cults
DoubleTwistVase3
by Cults
Last crawled date: 6 years, 2 months ago
This vase is fairly large and printed in 79 hours 52 minutes. I used a layer height of 0.200 mm and a print speed of 100 mm/sec.
Because this part is another double twist design means it results in ovelapping shells that can cause problems for slicing programs. The subject of overlapping shells is complex and this blog page can give you information about this: http://birkbinnard.com/blog/do-the-twist/. Because of these issues (which are actually issues with the structure of STL files) I had to use the Prusa version of Slic3r to slice this file. Neither Simplify3D 4.0 or Craftware 1.14 would slice it properly.
The vase has 2 colors simply because I mis-judged the amount of filament left on the blue reel and I had to switch to a different one to finish the print.
Because this part is another double twist design means it results in ovelapping shells that can cause problems for slicing programs. The subject of overlapping shells is complex and this blog page can give you information about this: http://birkbinnard.com/blog/do-the-twist/. Because of these issues (which are actually issues with the structure of STL files) I had to use the Prusa version of Slic3r to slice this file. Neither Simplify3D 4.0 or Craftware 1.14 would slice it properly.
The vase has 2 colors simply because I mis-judged the amount of filament left on the blue reel and I had to switch to a different one to finish the print.
Similar models
cults
free
SIngleTwistVase1
...e tricks for dealing with them. see this blog page for more info if you are interested: http://birkbinnard.com/blog/do-the-twist/
cults
free
DoubleTwistVase1
... shape was surprisingly simple, so i made this blog page explaining the method i used: http://birkbinnard.com/blog/do-the-twist/
cults
free
DoubleTwistLamp4
...doubletwistlamp4 cults led_lamp nightlight table_lamp this lamp is similar in shape to https://cults3d.com/en/3d-model/home/doubletwistlamp3 but uses different geometry to...
cults
free
QuadrupleTwistVase1
...og/the-quadruple-twist/. the actual print took just over 23 hours at a layer height of 0.200 mm and a print speed of 100 mm/sec.
cults
free
QuadTwistLED1
...d.com/blog/the-quadruple-twist/
this part printed in 22 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
cults
free
Perf Vase 1
...d on architectural designs.
this part printed in 24 1/4 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.
cults
free
DoubleTwistLamp3
...mm. for details why this is the case see that page or, for more information, this one: http://birkbinnard.com/blog/do-the-twist/.
cults
free
DoubleTwistLamp1
...it. for details why this is the case see that page or, for more information, this one: http://birkbinnard.com/blog/do-the-twist/.
cults
free
Faceted Vase 2
...g/parametric-modeling/
this part printed in 10 hours 48 min. using a layer height of 0.200 mm and a print speed of 100 mm./sec.
cults
free
Twisted Heart Double Vase - Single Extruder
...n can you.
i printed mine at 0.2mm later heights in fillamentum signal red and luminous red
happy printing and happy valentines
Doubletwistvase3
cults
free
DoubleTwistVase3
...one for more info on this one. this vase printed in 15 1/2 hours using a layer height of 0.200 mm and a print speed of 80 mm/sec.
cults
free
QuadrupleTwistVase1
...quadrupletwistvase1 cults although this vase sort of looks like https://cults3d.com/en/3d-model/home/doubletwistvase3birk it's geometry is quite a bit more complex, so...
cults
free
DoubleTwistLamp1
...0.400 mm. it uses the same basic design as https://cults3d.com/en/home/doubletwistvase3 so it may be that you have to use...