Door Lock Latch Sliding Bolt Lock by alienlifeform

Last crawled date: 3 years ago

Here is (yet another) simple sliding door lock.
The clearances around the moving parts are 0.2mm - so should be fine on most 3d printers.
Shouldn't need any supports to print it, i used a 40% infill and it is strong enough for light duty but clearly isn't meant to replace anything that is meant to provide security measures (it's plastic!)
There is a little assembly required once printed;
An M3 10mm machine screw attaches the handle to the bolt through the access hole in the bottom of the main body.