DodecaVase Suite by jaln

Last crawled date: 3 years ago

This is another set of vases that must be printed in "vase", "corkscrew", single wall mode.
Use 2 or 3 bottom layers and zero top layers.
The files here are relatively short and may not print unless scaled larger. The stl files are about 75mm and should be scaled to 120mm-150mm.
Here is one of the designs being printed scaled to 120mm height: https://youtu.be/l694WMigZ9Q
Note that if you stop printing at 150-160 layers, you will get a nice bowl or dish. 50-70mm of a 120mm scaled print. With some slicers, you can set it to quit printing at a certain height, otherwise, just pause and stop manually where you want the dish to end.