Thingiverse
DJI Mavic Air 2 Controller - Extended Sticks by Airmaxx23
by Thingiverse
Last crawled date: 3 years, 4 months ago
These are extended sticks (22mm long vs the stock 18mm) with a nice feeling end that is larger than stock. They are designed to be printed in TPU and require an M4x14mm bolt. The end should be printed as shown in the render and does not require supports.The bolt head is pressed into the stick end, it is a tight fit but will go in with a little effort.
Similar models
thingiverse
free
Sentinel Stock by Arekin
...oxied.)
the thumbscrew in the stock plat will need to be separated after printing, print with support and model on model support.
thingiverse
free
Ender 3 Hot End Spacer and Extended Fan Duct by mebow
...fast and easy to print.
no supports needed.
i recommend using 2 m3x16 bolts for the spacers, and i used 4 m3x6 bolts for the fan.
thingiverse
free
FrSky X-Lite Stick Extension by DangerousDanFPV
...mm.
please print these in tpu or other flexible material. they will need to stretch a little to fit over the stock gimbal sticks.
thingiverse
free
Ball Bearing Spool Holder for Monoprice Select Mini (Malyan M200) by andymandias
...so a little bit of force may be required. similary, push a 608 bearing into the opposite side of...
thingiverse
free
Motorcycle Bar End Mirror by FunkyCatJr
...s for my kawasaki z125.
5mm lock nut, bolt, and washer required.
a set of inexpensive convex mirrors (stick on type) to complete.
thingiverse
free
traxxas TRX-4 bolt on ESC mount by Big_White
...nt by big_white
thingiverse
bolts on stock ecs place. so you can stick on to it a aftermarket esc
its the sise like a stock esc.
thingiverse
free
Taranis X-Lite Extended Gimbal Stick End Protector by d_koenigs
...d the guards/protectors still extend past the top of the stick a bit. just barely still fits in the original case for the x-lite.
thingiverse
free
Radiomaster TX16S Long Stick Ends by Zoltinator
...mm hex screw driver a bit and then unscrew the sticks with your hand.
then simply screw the longer ones on until they tighten up.
thingiverse
free
Frsky X-Lite stick ends by ufoDziner
...st right. they are quite aggressive, so be careful when installing them.
edit: added the stick protectors that work with these.
thingiverse
free
DJI Spark - Stick Protector by dan55178
...ple low profile stick protector for dji spark remote control sticks.
if you print this see the notes in printer settings.
cheers.
Airmaxx23
thingiverse
free
Runcam HD Shield / Protector by Airmaxx23
...ll and is still strong.
like my stuff? buy me a beer. donations are accepted and greatly appreciated.
paypal: airmaxx23@gmail.com
thingiverse
free
TRX-4 Centered Bumper Mount by Airmaxx23
...r mount by airmaxx23
thingiverse
this is just a simple trx-4 bumper mount that centers the mount horizontally between the rails.
thingiverse
free
Armattan Rooster Antenna Tube Mount by Airmaxx23
...ttan rooster that works with 3 and 3.175mm o.d. antenna tubes, the mount is 5mm thick so you'll need longer screws to use it.
thingiverse
free
Bonka/Tattu/Lumenier Lipo Battery Protector (1300mAh 4S) by Airmaxx23
...hs roughly 9.7 grams.
like my stuff? buy me a beer. donations are accepted and greatly appreciated.
paypal: airmaxx23@gmail.com
thingiverse
free
Armattan F1 HS1177 Camera Mount by Airmaxx23
... made to slide over the stock aluminum standoffs. it weighs 3.6 grams, the 2 stock f1 camera brackets weigh a total of 3.2 grams.
thingiverse
free
Armattan F1 HS1177 Camera Mount w/ M3 Threaded Posts by Airmaxx23
...h aluminum standoffs.
like my stuff? buy me a beer. donations are accepted and greatly appreciated.
paypal: airmaxx23@gmail.com
thingiverse
free
GoPro 3 or 4 Lens Protector / Face Plate by Airmaxx23
...nted with a 30% infill.
like my stuff? buy me a beer. donations are accepted and greatly appreciated.
paypal: airmaxx23@gmail.com
thingiverse
free
HyperLite Floss 2 Dipole Antenna Holder by Airmaxx23
... the hyperlite floss 2 frame. it will fit any frame that uses 5mm diameter standoffs that are spaced 31mm apart center to center.
thingiverse
free
FlySky GT5 Futaba Short Switch Spacer by Airmaxx23
...https://m.facebook.com/groups/265365123944286/permalink/1141293756351414/?refid=18&ref=m_notif¬if_t=feedback_reaction_generic
thingiverse
free
Space One FPV Meteor - Micro Swift Mount (TPU) by Airmaxx23
...mple runcam micro swift (2) mount for the space one fpv meteor frame. it is designed to be printed in tpu and fits 5mm standoffs.
Mavic
thingiverse
free
MAVIC PRO LANDING GEAR (not mavic 2)
...mavic pro landing gear (not mavic 2)
thingiverse
9g light weight extended landing gear for your mavic pro
thingiverse
free
dji mavic by shura2000
...dji mavic by shura2000
thingiverse
dji mavic
thingiverse
free
MAVIC Mini Adapter
...mavic mini adapter
thingiverse
adapter for the mavic mini
thingiverse
free
Mavic Mini Case
...mavic mini case
thingiverse
this is a reduced version of the original for a mavic mini
thingiverse
free
Mavic Remote Guard by nadavde
...mavic remote guard by nadavde
thingiverse
a dji mavic
thingiverse
free
DJI Mavic Mini
...dji mavic mini
thingiverse
replacements for the small paper toolboxes that came in the carrying case for the dji mavic mini.
thingiverse
free
DJI MAVIC BOX by Digson
...dji mavic box by digson
thingiverse
dji mavic box
thingiverse
free
Mavic 5d button by binace
...mavic 5d button by binace
thingiverse
mavic 5d button replacement
thingiverse
free
DJI CABLE SLIDER FOR MAVIC
...dji cable slider for mavic
thingiverse
dji cable slider for mavic
thingiverse
free
DJI MAVIC MINI Accessories
...dji mavic mini accessories
thingiverse
dji mavic mini accessories
Dji
thingiverse
free
DJI phantom battery holder for DJI OSMO by eXtender
...dji phantom battery holder for dji osmo by extender
thingiverse
dji phantom battery extender for dji osmo .
thingiverse
free
DJI Keychant by fouli1
...dji keychant by fouli1
thingiverse
dji keychant
thingiverse
free
Logo dji by GL69
...logo dji by gl69
thingiverse
lodo dji
thingiverse
free
dji mavic by shura2000
...dji mavic by shura2000
thingiverse
dji mavic
thingiverse
free
carrello dji by MARCONE67
...carrello dji by marcone67
thingiverse
carrello dji
thingiverse
free
DJI Keyring by chris_harrison
...dji keyring by chris_harrison
thingiverse
keyring with dji logo
thingiverse
free
DJI Antenne by anselasa
...dji antenne by anselasa
thingiverse
per antenne dji
thingiverse
free
dji headband bracket
...dji headband bracket
thingiverse
dji headband bracket
thingiverse
free
Dji Osmo Cap
...dji osmo cap
thingiverse
dji osmo cap
thingiverse
free
DJI FPV Camera
...dji fpv camera
thingiverse
dji fpv camera
Extended
thingiverse
free
Extended by fluxcore
...extended by fluxcore
thingiverse
just extended to fit my hotend .
thingiverse
free
SnapStrap extender (Hat Strap extender)
...snapstrap extender (hat strap extender)
thingiverse
this is for the big headed people like me :)
thingiverse
free
Pencil extender
...pencil extender
thingiverse
allows you to extend your short pencils by 5.5cm
thingiverse
free
Pencil Extender by jamespolik
...pencil extender by jamespolik
thingiverse
pencil extender
thingiverse
free
Joystick Extender by supersaiyanscientists
...entists
thingiverse
a joystick extender for an arudino joystick. the extender is modeled after a joystick on a power wheelchair.
thingiverse
free
Extending Tube by MakeALot
...extending tube by makealot
thingiverse
an extending tube printed as a single print.
extend, twist and push to lock in place.
thingiverse
free
Microphone extender for camaera
...microphone extender for camaera
thingiverse
camera microphone extender
thingiverse
free
Key extender by Erdnuss
...key extender by erdnuss
thingiverse
extend you key
thingiverse
free
makerbot filament extended
...makerbot filament extended
thingiverse
makerbot filament extended back spool
thingiverse
free
Extended Zodiac - Indigo
...extended zodiac - indigo
thingiverse
all indigo extended zodiac signs
Sticks
thingiverse
free
Stick stick stick stick sticky sticky stick stick by Jenny_Y8S
...stick stick stick stick sticky sticky stick stick by jenny_y8s
thingiverse
stick stick stick stick sticky sticky stick stick
thingiverse
free
stick
...stick
thingiverse
stick
thingiverse
free
Jogging Stick (Sticking)
...le know)
https://www.youtube.com/watch?v=cd2ly857oty
more great information
http://www.builderbill-diy-help.com/joggle-stick.html
thingiverse
free
sushi stick
...sushi stick
thingiverse
sushi stick for eat!!
thingiverse
free
Swizzle stick
...swizzle stick
thingiverse
swizzle stick - just for fun.
thingiverse
free
Arrowcatcher Stick - Pfeilfänger Stick by PeterS1
...://www.thingiverse.com/thing:2573339).
this is a transport stick for 3 arrowcatcher (https://www.thingiverse.com/thing:2573339).
thingiverse
free
Stick guard T18MZ with stick switches by Tripel
...stick switches. these guards protect the switches in the sticks and the stick gimbals during transport in the teansportcase....
thingiverse
free
Glue Stick Holder for 8 sticks by Bob99
...simple glue stick holder that is meant to make to make it easy to grab and replace glue sticks. it is 155mm long by 120 mm wide.
thingiverse
free
Sticks by dragonights91
...sticks by dragonights91
thingiverse
sticks action figure statue for collection :) fan made character sonic boom
thingiverse
free
Slow Stick / Low Stick wing mounts by RepRapper
...slow stick / low stick wing mounts by reprapper
thingiverse
slow stick low wing mounts
Air
thingiverse
free
AIR AIR by baylor_yuan
...air air by baylor_yuan
thingiverse
an awesome product made by my friends.they are on kickstarter.(just for learn and study)
thingiverse
free
Air valve
...he air is bleed. but this is enough to regulate the air flow. i use it to adjust the airflow for fluidized bed dyeing (fluidbed).
thingiverse
free
Air Pistol/Air Gun by layerone
... is basicly the same mechanism as air cannon, but less powerfull, and the attck range is only 10 meters.
www.atom3dp.com/en/atom2
thingiverse
free
air ballons by
...air ballons by
thingiverse
these are air balloons
thingiverse
free
Air Gun Air Brake by bkgray115
...air gun air brake by bkgray115
thingiverse
printed but un-tested as of yet
thingiverse
free
air to air rocket by Maverick204
...rts to print
all printed with supports
in this link you can see the corsair in action:https://www.youtube.com/watch?v=rpajlbc9zhq
thingiverse
free
KDC-10 Air to Air refuel tanker by Emn
...kdc-10 air to air refuel tanker by emn
thingiverse
kdc-10 air to air refuel tanker
work in progress
thingiverse
free
Air deflector by JakeCape
...air deflector by jakecape
thingiverse
air deflector for my air dryer.
thingiverse
free
Air knife (compressed air diffuser) by NeverDun
...amshells around modular coolant/air pipes commonly seen in shops. works really well, and is much quieter than a standard nozzle.
thingiverse
free
Air conditioner - air block by alchemico
...outube.com/watch?v=vbnfskuqdes
you can throw ice cubes into the water. air condittioner will work much much much more effectively
Controller
thingiverse
free
Megapoints Controllers - Servo Controller by SoBaldrick
...megapoints controllers - servo controller by sobaldrick
thingiverse
megapoints controllers - servo controller base
thingiverse
free
controller by tahmasnx
...controller by tahmasnx
thingiverse
controller fusion 360
thingiverse
free
Control panel
...control panel
thingiverse
control panel for scuba regulator/bank system
thingiverse
free
ph controller
...ph controller
thingiverse
pi zero based reef-pi ph controller
thingiverse
free
NES Controller
...nes controller
thingiverse
this is just a simple nes controller prop. display purposes only.
thingiverse
free
Frame control
...frame control
thingiverse
installation led 12864 reprapdiscount for control machine 3d printer.
thingiverse
free
Control Tower
...control tower
thingiverse
control tower or marshall tower for 1/32 slot car track
thingiverse
free
Controller Hook by P0chapa
... for (maybe) any game controller.
i attached this thing to ps2 controller and third-party xbox controller with double sided tape.
thingiverse
free
Xbox 360 controller stand for 3 controllers by afrolucas
...xbox 360 controller stand for 3 controllers by afrolucas
thingiverse
update for 3 controllers
thingiverse
free
PS4 Controller Stand for 3 Controllers (Dualshock 4)
...the stands for a nvidia shield controller rather than a ps4 controller (so two ps4 controllers and one nvidia shield controller).
2
thingiverse
free
KV-2-2-2 by redstone125
...kv-2-2-2 by redstone125
thingiverse
nuclear death refrigerator x3.
thingiverse
free
Braccialetto 2 - Bracelets 2 by doctormao
...braccialetto 2 - bracelets 2 by doctormao
thingiverse
braccialetto 2 - bracelets 2
thingiverse
free
Schleuder 2 / Slingshot 2 by Ju5tMak3
...schleuder 2 / slingshot 2 by ju5tmak3
thingiverse
schleuder 2 / slingshot 2
have fun
thingiverse
free
2-Hexagon-2 by letongtr
...2-hexagon-2 by letongtr
thingiverse
ultrascope project
thingiverse
free
X'2 2 by kwcartroom
...x'2 2 by kwcartroom
thingiverse
try number 2
thingiverse
free
2 Color Box (#2) by David_Mussaffi
...2 color box (#2) by david_mussaffi
thingiverse
2 color box (#2)https://www.youtube.com/watch?v=g5jgss-fn_8
thingiverse
free
Toy Gun 2-2
...toy gun 2-2
thingiverse
this morning's design.
thingiverse
free
(a+b)^2 = a^2 +2ab+b^2, algebraic formula by lgbu
... ways to explain (a+b)^2 = a^2 +2ab+b^2.
the board alone is enough; the component pieces just add another layer of manipulation.
thingiverse
free
2 by orhandrkn
...2 by orhandrkn
thingiverse
2
thingiverse
free
2 by Nicolewake
...2 by nicolewake
thingiverse
2