DIY Vacuum Robot by cesnietor

Last crawled date: 3 years, 1 month ago

This is my first Vacuum Robot which can be all 3d printed.
For more info see the instructable https://www.instructables.com/id/Build-Your-Own-Vacuum-Robot.
Print the following files:
-1x Con_3_bottom_58mm.stl
-1x Con_3_Top.stl
-1x FilterTap.stl
-1x FilterCover1.1.stl
-1x Vacuum_Robot_top_9.stl
-1x Vaccum_Robot_bottom_9.0.1_bottom.stl
-1x Bumper2.stl
-2x button#mmbasewidth.stl
(Note: The button base shall be printed depending on the length of the button of your push button. Try printing the button_1mmbasewidth.stl first and if the button doesn't push easily print then the button_2mmbasewidth.stl)
-2x buttonSupport.stl
(Note: In case you break the small male cylinder where the button support is intended to fit (cause it can be fragile), you can drill a 1/8" hole and print the buttonSupport_2_drillhole.stl)
-2x Sharp_Support.stl
Let me know any suggestions!
Note: You can't sell this. But we can make a deal so text me.
Print the following things before all the others to ensure the quality. (Not too much filament is needed)
-http://www.thingiverse.com/thing:2297050
-http://www.thingiverse.com/thing:2297043
If you like the project, you can show your love buying me a Coffee :), you're awesome!https://www.buymeacoffee.com/cesnietor
Update:
-19/06/2017:
Vaccum_Robot_bottom_9.0.1_bottom.stl added, fan drill hole fixed.
Sharp_Support added.