Thingiverse
DIY MMU2S clone
by Thingiverse
Last crawled date: 4 years, 3 months ago
Build your own DIY filament changer
Help me to buy new rolls/hardware for testing ;)
Paypal donate
Update
update 3/3/20
docs
update 25/2/20 :
documentation 1.0 (see PDF in file section)
update 6/2/20 :
add block support for gear motor with ball bearing, so the 5mm rod is supported by two ball bearing
add case top that allow fixing on 2020
This thing a little howto for building a DIY MMU2s for a printer with an skr 1.3 board on the printer and a skr mini (or gt2560) in the MMU2s.
What you need to print :
MMU2S
MMU2S ("mmu2s unit" directory ) :https://www.prusa3d.com/downloads/others/MK3orMK25toMMU2S_upgrade_stl.zip
Extruder
Recommended : https://www.thingiverse.com/thing:3626993
or classic MK3s mmu2s (directory "mk3s or mk25s extruder") :https://www.prusa3d.com/downloads/others/MK3orMK25toMMU2S_upgrade_stl.zip
MMU print upgrade :
Ease filament insertion : PTFE insert MMU :https://www.thingiverse.com/thing:3233579
orhttps://www.thingiverse.com/thing:3657251
Better selector upgrade :https://www.thingiverse.com/thing:3528314
Stl available here
What I customized and you can download in file section:
MK3-mmu2s IN with PC4-M10 compaticle with 6-in1 splitter
skr mini box for the MMU
MMU support for 2020
block for gear stepper
block for idler stepper (with inside ball roller)
ASSEMBLY
Extruder
Recommended extruder : https://www.thingiverse.com/thing:3626993
But if you want the orginal extruder :
For assembly of the MK3s-mmu2 extruder :https://manual.prusa3d.com/Guide/5.+E-axis+assembly/1055?lang=enhttps://manual.prusa3d.com/Guide/3B.+MK3S-MK2.5S+-+extruder+upgrade/1070?lang=en
Original prusa stl : https://www.prusa3d.com/prusa-i3-printable-parts/
MMU2S
For assembly of the MMU2s, you can use the official documentation :https://manual.prusa3d.com/c/Original_Prusa_i3_MK3S_to_MMU2S
Marlin version addon
Klipper version addon
Wiring the SKR-MINI
Marlin
3 drivers (DRV8825, TMC220X, A4988 ...) and configure the jumper to 1/16 to X Y and E0
X to selector Motor
Y to idler Motor
E0 to gear/extruder motor
Connect PINDA to X MIN
BROWN = +5V
BLUE = GND
BLACK = SIGNAL
Color selector to Z MIN pin
RED = SIGNAL
BLACK = GND
Filament extruder switch ( IR sensor on the extruder) to Z MAX pin
VCC = 5V
S = SIGNAL
G = GND
Add for wire from the SKR 1.3 (TFT) to the SKR MINI (TFT)
GND = GND
TX = RX
RX = TX
Z MAX Signal = RESET
Klipper
Firmware
Marlin
SKR MINI
Custom firmware for the MMU2 with a skr mini or GT2560 board (replace prusa firmware) :https://github.com/kakou-fr/mmu2s-clone
You can/must customize the file /mmu2-diy/config.h to indicate the size of your bowden tube
#define DIST_MMU_EXTRUDER 690
#define DIST_EXTRUDER_BTGEAR 30
And flash the SKR MINI with this firmware.
Printer
You can use My modified Marlin firmware (with my SKR 1.3 config) :https://github.com/kakou-fr/Marlin
Or use the last version of Marlin 2.0 bugfix
For the Marlin configuration, see the file MMU2S-clone-guide_v0.1.pdf
Klipper
Install the last version of klipper (https://www.klipper3d.org/Installation.html)
The MMU2S configuration is in the file : https://github.com/KevinOConnor/klipper/blob/master/config/sample-mmu2s-diy.cfg
you can include this file in your printer.cfg by adding (at the end of the printer.cfg) :
[include klipper/config/sample-mmu2s-diy.cfg]
Modify the parameter in the section PARAMETER TO ADAPT TO YOUR SETUP to match your setup
Howto to use it
ASAP
Marlin version
Klipper version
BOM
for screw, refer to prusa assembly guide (and buffer guide), you need a lot of M3/M2 screw
other :
PTFE 3x4mm (filament roll <-> buffer <-> mmu <-> extruder, i used 7 meter)https://www.aliexpress.com/item/1M-PTFE-Tube-Clear-Teflon-PiPe-to-J-head-hotend-RepRap-Rostock-Bowden-Extruder-Throat-For/32535510253.html?spm=a2g0s.9042311.0.0.27426c374OHBk7
PTFE fit (PC4-M6 x5 (mmu in))https://www.aliexpress.com/item/Pneumatic-Connectors-Bowden-Extruder-J-head-Hotend-for-OD-4mm-or-6mm-PTFE-Tube-Quick-Coupler/32809884127.html?spm=a2g0s.9042311.0.0.27426c37G5AlWi
PTFE fit (PC4-M10 x12(buffer x10, mmu out, mk3s in))https://www.aliexpress.com/item/Pneumatic-Connectors-Bowden-Extruder-J-head-Hotend-for-OD-4mm-or-6mm-PTFE-Tube-Quick-Coupler/32809884127.html?spm=a2g0s.9042311.0.0.27426c37G5AlWi
mk3s extruder
24V blower (5015 turbo) :https://www.aliexpress.com/item/5015-4010-4020-12V-24V-Cooling-Turbo-Fan-Brushless-3D-Printer-Parts-2Pin-For-Extruder-DC/32874940278.html?spm=a2g0s.9042311.0.0.27426c373ckTlm
24V fan (4010) :https://www.aliexpress.com/item/5015-4010-4020-12V-24V-Cooling-Turbo-Fan-Brushless-3D-Printer-Parts-2Pin-For-Extruder-DC/32874940278.html?spm=a2g0s.9042311.0.0.27426c373ckTlm
hotend 24v Ptfe inside :https://www.aliexpress.com/item/Trianglelab-Highall-metal-v6-hotend-12V-24V-remote-Bowen-print-J-head-Hotend-and-cooling-fan/32844028127.html?spm=a2g0s.9042311.0.0.27426c37BKNwat
btech clone gearhttps://www.aliexpress.com/item/1Set-Cloned-Btech-Dual-Gears-DIY-Prusa-i3-Steel-Pulleys-Kit-3D-Printer-Gears-Extrusion-Wheel/32885613357.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
filament sensor IRhttps://www.aliexpress.com/item/Mk2-5-Mk3-To-Mk2-5s-Mk3s-Latest-3D-IR-Filament-Sensor-Upgrade-Detect-Stuck-Filament/32976750770.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
MMU2S
stepper (1.7A x3) :https://www.amazon.fr/gp/product/B06Y4NYJWN/
spring 15mm (2 for mmu, 1 for mk3s) :https://www.aliexpress.com/item/20pcs-compression-spring-wire-diameter-0-5mm-outer-diameter-4mm-Stainless-Steel-Micro-Small-Compression-spring/33021741010.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
coupler 5x5 (1) and 5mm x 8mm (1)https://www.aliexpress.com/item/Kande-Bearings-1pc-5x5-5x8-8x8-3D-Printer-Accessories-Aluminum-Couplings-Ship-Model-Couplings-5-5/32869281876.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
skr mini (1 for mmu)https://www.aliexpress.com/item/BIGTREETECH-SKR-mini-V1-1-32-Bit-Control-Board-ARM-CPU-32Bit-3D-Printer-Parts-TMC2130/33011542798.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
Clone gear (the one I use)https://www.aliexpress.com/item/5pcs-Filament-Gear-Motor-Gear-Filament-Pulley-For-Prusa-i3-MK2-MK2-5-MK3-Multi-Materials/32956124800.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
or Gear MK8 ( MK8 D) x5https://www.aliexpress.com/item/MK7-MK8-Extruder-Drive-Gear-Bore-26-36-40-teeth-5-8mm-For-1-75-3/33001874597.html?spm=a2g0s.9042311.0.0.27426c37DT28yh
rod 150mmx5mm (need to cut to the correct size with something like a dremel, 5x 16mm)https://www.aliexpress.com/item/RC-Stainless-Steel-Rod-shaft-Linear-Rail-Round-Shaft-Length150mm-Diameter-3mm-2mm-2-5mm-4mm/32297671032.html?spm=a2g0s.9042311.0.0.27426c37G5AlWi
leadscreww 150mm (you can cut it to correct size or not :))https://www.aliexpress.com/item/Lead-Screw-100mm-150mm-250mm-300mm-330mm-350mm-3D-Printers-Parts-8mm-Trapezoidal-Screws-Copper-Nuts/32971570416.html?spm=a2g0s.9042311.0.0.27426c37G5AlWi
pinda (x1)https://www.aliexpress.com/item/Prusa-i3-mk2-mk2s-F-I-N-D-A-Probe-Compatiable-With-mini-rambo-For-DIY/32909754101.html?spm=a2g0s.9042311.0.0.27426c37OzLD9y
rod and laiton tubehttps://www.aliexpress.com/item/1-Set-Prusa-i3-MK3-Multi-Materials-2-0-Aluminum-120mm-Smooth-Rods-And-Brass-Tube/32956496462.html?spm=a2g0s.9042311.0.0.27426c37OzLD9y
metal ball for pinda (7mm)https://www.aliexpress.com/item/10PCS-Pack-Durable-Bicycle-Stainless-Steel-Ball-Replacement-Parts-2mm-3mm-4-763mm-5mm-6mm-7mm/32965688089.html?spm=a2g0s.9042311.0.0.27426c37EssjEm
ptfe capricorn clone 1m (inside the mmu, you need to cut small part and drill the in)https://fr.aliexpress.com/item/32889180926.html?spm=a2g0o.productlist.0.0.6ae726a5l2HjaF&algo_pvid=5320d311-e6ed-491d-959b-b89e051e53d6&algo_expid=5320d311-e6ed-491d-959b-b89e051e53d6-9&btsid=24dc803f-a53a-459e-9c8e-f489c849b701&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55
bearings : 625-ZZ bearings (x10)
What i use in my printer
LV8729 extruder driver (1)https://www.aliexpress.com/item/LV8729-stepper-motor-driver-4-layer-substrate-ultra-quiet-driver-LV8729-driver-support-6V-36V-full/32812173457.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
tmc2209 (x/y)https://www.aliexpress.com/item/Pre-Sale-BIGTREETECH-TMC2209-V1-1-UART-Stepper-Motor-Driver-Stepsticks-Mute-Driver-VS-TMC2208-TMC2130/33028054557.html?spm=a2g0s.9042311.0.0.27426c37OzLD9y
skr 1.3https://www.aliexpress.com/item/BIGTREETECH-SKR-V1-3-Control-Board-32-Bit-ARM-CPU-32bit-Board-Smoothieboard-3D-Printer-Parts/32980090169.html?spm=a2g0s.9042311.0.0.27426c37HDT5ir
Help me to buy new rolls/hardware for testing ;)
Paypal donate
Update
update 3/3/20
docs
update 25/2/20 :
documentation 1.0 (see PDF in file section)
update 6/2/20 :
add block support for gear motor with ball bearing, so the 5mm rod is supported by two ball bearing
add case top that allow fixing on 2020
This thing a little howto for building a DIY MMU2s for a printer with an skr 1.3 board on the printer and a skr mini (or gt2560) in the MMU2s.
What you need to print :
MMU2S
MMU2S ("mmu2s unit" directory ) :https://www.prusa3d.com/downloads/others/MK3orMK25toMMU2S_upgrade_stl.zip
Extruder
Recommended : https://www.thingiverse.com/thing:3626993
or classic MK3s mmu2s (directory "mk3s or mk25s extruder") :https://www.prusa3d.com/downloads/others/MK3orMK25toMMU2S_upgrade_stl.zip
MMU print upgrade :
Ease filament insertion : PTFE insert MMU :https://www.thingiverse.com/thing:3233579
orhttps://www.thingiverse.com/thing:3657251
Better selector upgrade :https://www.thingiverse.com/thing:3528314
Stl available here
What I customized and you can download in file section:
MK3-mmu2s IN with PC4-M10 compaticle with 6-in1 splitter
skr mini box for the MMU
MMU support for 2020
block for gear stepper
block for idler stepper (with inside ball roller)
ASSEMBLY
Extruder
Recommended extruder : https://www.thingiverse.com/thing:3626993
But if you want the orginal extruder :
For assembly of the MK3s-mmu2 extruder :https://manual.prusa3d.com/Guide/5.+E-axis+assembly/1055?lang=enhttps://manual.prusa3d.com/Guide/3B.+MK3S-MK2.5S+-+extruder+upgrade/1070?lang=en
Original prusa stl : https://www.prusa3d.com/prusa-i3-printable-parts/
MMU2S
For assembly of the MMU2s, you can use the official documentation :https://manual.prusa3d.com/c/Original_Prusa_i3_MK3S_to_MMU2S
Marlin version addon
Klipper version addon
Wiring the SKR-MINI
Marlin
3 drivers (DRV8825, TMC220X, A4988 ...) and configure the jumper to 1/16 to X Y and E0
X to selector Motor
Y to idler Motor
E0 to gear/extruder motor
Connect PINDA to X MIN
BROWN = +5V
BLUE = GND
BLACK = SIGNAL
Color selector to Z MIN pin
RED = SIGNAL
BLACK = GND
Filament extruder switch ( IR sensor on the extruder) to Z MAX pin
VCC = 5V
S = SIGNAL
G = GND
Add for wire from the SKR 1.3 (TFT) to the SKR MINI (TFT)
GND = GND
TX = RX
RX = TX
Z MAX Signal = RESET
Klipper
Firmware
Marlin
SKR MINI
Custom firmware for the MMU2 with a skr mini or GT2560 board (replace prusa firmware) :https://github.com/kakou-fr/mmu2s-clone
You can/must customize the file /mmu2-diy/config.h to indicate the size of your bowden tube
#define DIST_MMU_EXTRUDER 690
#define DIST_EXTRUDER_BTGEAR 30
And flash the SKR MINI with this firmware.
Printer
You can use My modified Marlin firmware (with my SKR 1.3 config) :https://github.com/kakou-fr/Marlin
Or use the last version of Marlin 2.0 bugfix
For the Marlin configuration, see the file MMU2S-clone-guide_v0.1.pdf
Klipper
Install the last version of klipper (https://www.klipper3d.org/Installation.html)
The MMU2S configuration is in the file : https://github.com/KevinOConnor/klipper/blob/master/config/sample-mmu2s-diy.cfg
you can include this file in your printer.cfg by adding (at the end of the printer.cfg) :
[include klipper/config/sample-mmu2s-diy.cfg]
Modify the parameter in the section PARAMETER TO ADAPT TO YOUR SETUP to match your setup
Howto to use it
ASAP
Marlin version
Klipper version
BOM
for screw, refer to prusa assembly guide (and buffer guide), you need a lot of M3/M2 screw
other :
PTFE 3x4mm (filament roll <-> buffer <-> mmu <-> extruder, i used 7 meter)https://www.aliexpress.com/item/1M-PTFE-Tube-Clear-Teflon-PiPe-to-J-head-hotend-RepRap-Rostock-Bowden-Extruder-Throat-For/32535510253.html?spm=a2g0s.9042311.0.0.27426c374OHBk7
PTFE fit (PC4-M6 x5 (mmu in))https://www.aliexpress.com/item/Pneumatic-Connectors-Bowden-Extruder-J-head-Hotend-for-OD-4mm-or-6mm-PTFE-Tube-Quick-Coupler/32809884127.html?spm=a2g0s.9042311.0.0.27426c37G5AlWi
PTFE fit (PC4-M10 x12(buffer x10, mmu out, mk3s in))https://www.aliexpress.com/item/Pneumatic-Connectors-Bowden-Extruder-J-head-Hotend-for-OD-4mm-or-6mm-PTFE-Tube-Quick-Coupler/32809884127.html?spm=a2g0s.9042311.0.0.27426c37G5AlWi
mk3s extruder
24V blower (5015 turbo) :https://www.aliexpress.com/item/5015-4010-4020-12V-24V-Cooling-Turbo-Fan-Brushless-3D-Printer-Parts-2Pin-For-Extruder-DC/32874940278.html?spm=a2g0s.9042311.0.0.27426c373ckTlm
24V fan (4010) :https://www.aliexpress.com/item/5015-4010-4020-12V-24V-Cooling-Turbo-Fan-Brushless-3D-Printer-Parts-2Pin-For-Extruder-DC/32874940278.html?spm=a2g0s.9042311.0.0.27426c373ckTlm
hotend 24v Ptfe inside :https://www.aliexpress.com/item/Trianglelab-Highall-metal-v6-hotend-12V-24V-remote-Bowen-print-J-head-Hotend-and-cooling-fan/32844028127.html?spm=a2g0s.9042311.0.0.27426c37BKNwat
btech clone gearhttps://www.aliexpress.com/item/1Set-Cloned-Btech-Dual-Gears-DIY-Prusa-i3-Steel-Pulleys-Kit-3D-Printer-Gears-Extrusion-Wheel/32885613357.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
filament sensor IRhttps://www.aliexpress.com/item/Mk2-5-Mk3-To-Mk2-5s-Mk3s-Latest-3D-IR-Filament-Sensor-Upgrade-Detect-Stuck-Filament/32976750770.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
MMU2S
stepper (1.7A x3) :https://www.amazon.fr/gp/product/B06Y4NYJWN/
spring 15mm (2 for mmu, 1 for mk3s) :https://www.aliexpress.com/item/20pcs-compression-spring-wire-diameter-0-5mm-outer-diameter-4mm-Stainless-Steel-Micro-Small-Compression-spring/33021741010.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
coupler 5x5 (1) and 5mm x 8mm (1)https://www.aliexpress.com/item/Kande-Bearings-1pc-5x5-5x8-8x8-3D-Printer-Accessories-Aluminum-Couplings-Ship-Model-Couplings-5-5/32869281876.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
skr mini (1 for mmu)https://www.aliexpress.com/item/BIGTREETECH-SKR-mini-V1-1-32-Bit-Control-Board-ARM-CPU-32Bit-3D-Printer-Parts-TMC2130/33011542798.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
Clone gear (the one I use)https://www.aliexpress.com/item/5pcs-Filament-Gear-Motor-Gear-Filament-Pulley-For-Prusa-i3-MK2-MK2-5-MK3-Multi-Materials/32956124800.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
or Gear MK8 ( MK8 D) x5https://www.aliexpress.com/item/MK7-MK8-Extruder-Drive-Gear-Bore-26-36-40-teeth-5-8mm-For-1-75-3/33001874597.html?spm=a2g0s.9042311.0.0.27426c37DT28yh
rod 150mmx5mm (need to cut to the correct size with something like a dremel, 5x 16mm)https://www.aliexpress.com/item/RC-Stainless-Steel-Rod-shaft-Linear-Rail-Round-Shaft-Length150mm-Diameter-3mm-2mm-2-5mm-4mm/32297671032.html?spm=a2g0s.9042311.0.0.27426c37G5AlWi
leadscreww 150mm (you can cut it to correct size or not :))https://www.aliexpress.com/item/Lead-Screw-100mm-150mm-250mm-300mm-330mm-350mm-3D-Printers-Parts-8mm-Trapezoidal-Screws-Copper-Nuts/32971570416.html?spm=a2g0s.9042311.0.0.27426c37G5AlWi
pinda (x1)https://www.aliexpress.com/item/Prusa-i3-mk2-mk2s-F-I-N-D-A-Probe-Compatiable-With-mini-rambo-For-DIY/32909754101.html?spm=a2g0s.9042311.0.0.27426c37OzLD9y
rod and laiton tubehttps://www.aliexpress.com/item/1-Set-Prusa-i3-MK3-Multi-Materials-2-0-Aluminum-120mm-Smooth-Rods-And-Brass-Tube/32956496462.html?spm=a2g0s.9042311.0.0.27426c37OzLD9y
metal ball for pinda (7mm)https://www.aliexpress.com/item/10PCS-Pack-Durable-Bicycle-Stainless-Steel-Ball-Replacement-Parts-2mm-3mm-4-763mm-5mm-6mm-7mm/32965688089.html?spm=a2g0s.9042311.0.0.27426c37EssjEm
ptfe capricorn clone 1m (inside the mmu, you need to cut small part and drill the in)https://fr.aliexpress.com/item/32889180926.html?spm=a2g0o.productlist.0.0.6ae726a5l2HjaF&algo_pvid=5320d311-e6ed-491d-959b-b89e051e53d6&algo_expid=5320d311-e6ed-491d-959b-b89e051e53d6-9&btsid=24dc803f-a53a-459e-9c8e-f489c849b701&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55
bearings : 625-ZZ bearings (x10)
What i use in my printer
LV8729 extruder driver (1)https://www.aliexpress.com/item/LV8729-stepper-motor-driver-4-layer-substrate-ultra-quiet-driver-LV8729-driver-support-6V-36V-full/32812173457.html?spm=a2g0s.9042311.0.0.27426c37nC13mZ
tmc2209 (x/y)https://www.aliexpress.com/item/Pre-Sale-BIGTREETECH-TMC2209-V1-1-UART-Stepper-Motor-Driver-Stepsticks-Mute-Driver-VS-TMC2208-TMC2130/33028054557.html?spm=a2g0s.9042311.0.0.27426c37OzLD9y
skr 1.3https://www.aliexpress.com/item/BIGTREETECH-SKR-V1-3-Control-Board-32-Bit-ARM-CPU-32bit-Board-Smoothieboard-3D-Printer-Parts/32980090169.html?spm=a2g0s.9042311.0.0.27426c37HDT5ir
Similar models
thingiverse
free
KP3S BMG E3DV6 extruder mod by ehitaja_fpv
...af19b7xaof8q
nema17 17hs4023 extruder motor https://www.aliexpress.com/item/32998564515.html?spm=a2g0s.9042311.0.0.27424c4da1ai8m
thingiverse
free
Curtain Control System
...2311.0.0.3bb14c4djb8a7m
dc-dc (12v to 5v) : https://www.aliexpress.com/item/32742116421.html?spm=a2g0s.9042311.0.0.27424c4doqjuwk
thingiverse
free
Ender 3 pro Direct - E3D V6, fan duct Prusa mini design, runout sensor, BLTOUCH, 5015 Fan by Tomas633
...11.0.0.27424c4dv1tn6b
marlin settings
define x_min_pos -10.75
define y_min_pos -25
define nozzle_to_probe_offset { -20, 14.5, 0 }
grabcad
free
BMG Aero Extruder
...424c4dxjqzch
please buy a titan heatbreak.
https://www.aliexpress.com/item/32853548000.html?spm=a2g0s.9042311.0.0.27424c4dxjqzch
thingiverse
free
12/24v case by Havrick
...ingiverse
just a case for a 12/24v socket.
https://www.aliexpress.com/item/33049954671.html?spm=a2g0s.9042311.0.0.2742b90aahnyif
thingiverse
free
XT60 to USB power converter by Tiitan
...ews inside
mounted to my printer with m216 t-nut bolt
i use it to power my printer octopi directly from my printer power supply.
thingiverse
free
MKSima full direct extruder V6 by sima35
... filaments
i recommend only for those users who can also set the firmware
!!i do not recommend beginners only at their own risk!!
thingiverse
free
Internet radio by marigu
...html?spm=a2g0s.9042311.0.0.27424c4dyfcy69
https://www.aliexpress.com/item/4001165112842.html?spm=a2g0s.9042311.0.0.27424c4dt8zbfs
thingiverse
free
Sovol SV01 Left BMG Extruder and E3D V6 direct conversion by macielle
...ps://www.thingiverse.com/thing:4329777
the hotend cooler i've downloaded from here: https://www.thingiverse.com/thing:4547109
thingiverse
free
PANASONIC BATTERY
...2g0s.9042311.0.0.27424c4d6unh2a
power meter:https://www.aliexpress.com/item/33003319718.html?spm=a2g0s.9042311.0.0.27424c4d6unh2a
Mmu2S
thingiverse
free
MMU2S Adapter Printer
...mmu2s adapter printer
thingiverse
proper piece to upgrade an mk3 mmu2 to an mk3s mmu2s
thingiverse
free
mmu2s extension by mumg
...mmu2s extension by mumg
thingiverse
added support of endstop for mmu2 idler
thingiverse
free
MMU2 Buffer horizontal stand
...mmu2 buffer horizontal stand
thingiverse
the mmu2 stand is designed for the ikea lack housing and two stacked samla dryboxes.
thingiverse
free
MMU2S M10 Passthrough Selector
...assthrough selector
thingiverse
designed for a better path from mmu2s selector to printer with m10 passthrough bowden connector.
thingiverse
free
Spiral tree MMU2
...spiral tree mmu2
thingiverse
not suitable for printing in vase mode
thingiverse
free
Prusa MMU2 Light Bar
...prusa mmu2 light bar
thingiverse
simple remix of mr_tantrum's prusa mk3/mk3s light bar in order to accommodate for the mmu2
thingiverse
free
Prusa MMU2 tube holder for filament
...prusa mmu2 tube holder for filament
thingiverse
wall tubes 6pcs holder between filament and mmu2 unit
thingiverse
free
Sonicare Toothbrush Holder for MMU2/S
...e toothbrush holder for mmu2/s
thingiverse
added color rings on the top of the toothbrush stands, to print it with prusa mmu2/s.
thingiverse
free
MMU2s Quick Test by MrPUSH
...thingiverse
i made this mmu2s quick test because i wanted something that would switch colors quickly. i usually add a 10mm brim.
thingiverse
free
Idles MMU2 Beermat
...d this at 95mm x 95mm x 2mm with 100% infill.
for more beermats, see my group:
https://www.thingiverse.com/groups/beermats/things
Diy
3d_export
free
DIY 3D Printer
...diy 3d printer
3dexport
diy 3d printer model
turbosquid
$10
Diy tiered
...l diy tiered for download as max, max, max, max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1603709)
turbosquid
$3
Diy Desk to Bench
...odel diy desk to bench for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1506589)
turbosquid
$2
DIY Moon Light
...model diy moon light for download as obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1501170)
3d_export
$8
DIY CNC Router 3D Model
...diy cnc router 3d model
3dexport
cnc; router; diy; homemade
diy cnc router 3d model maikeru86 58463 3dexport
turbosquid
$5
Diy Kitchen Cabinets
...itchen cabinets for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1197373)
3d_export
free
Download free Diying Plant 3D Model
...download free diying plant 3d model
3dexport
diying plant blender
diying plant 3d model visitorsama 98607 3dexport
3ddd
$1
DIY coffee table + decor
... рамка для фото
кофейный столик diy 400х350х600(h) мм. моделился по фото. внимание: материалы - corona.
turbosquid
$3
Diy Wire Lamp Shade
...free 3d model diy wire lamp shade for download as 3ds and fbx on turbosquid: 3d models for games, architecture, videos. (1347605)
cg_studio
$12
DIY MONGOLIAN LAMB STOOLS3d model
... hair soft pile white
.max - diy mongolian lamb stools 3d model, royalty free license available, instant download after purchase.
Clone
3d_export
$5
Clones great republic
...clones great republic
3dexport
clones great republic.those same clones from the star wars movie universe.4 clones available.
3d_export
$10
Clone 3D Model
...clone 3d model
3dexport
clone woman girl female lady chamber sci fi
clone 3d model calcm1 51695 3dexport
turbosquid
$5
Clone machine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archive3d
free
Clone trooper 3D Model
...nd army soldier trooper
clone trooper 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
free
Lego Clone Walker
...ree 3d model lego sw clone walker for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1292252)
turbosquid
$15
Clone trooper helmet
...d model clone trooper helmet for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1199355)
archive3d
free
Clone trooper 3D Model
...and army soldier trooper
clonetrooper 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Clone trooper 3D Model
...and army soldier trooper
clonetrooper 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$35
Surface Clone C4D materials
...+ of the most well made materials for maxon’s cinema 4d; on the internet today. each material is crafted with a specific purpo...
turbosquid
$3
Sci-fi cloning vats
...cloning vats for download as 3ds, obj, wrl, x, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1290168)