Diving Bell

A diving bell is a rigid chamber used to transport divers from the surface to depth and back in open water, usually for the purpose of performing underwater work. The most common types are the open bottomed wet bell and the closed bell, which can maintain an internal pressure greater than the external ambient. Diving bells are usually suspended by a cable, and lifted and lowered by a winch from a surface support platform. Unlike a submersible, the diving bell is not designed to move under the control of its occupants, nor to operate independently of its launch and recovery system. The wet bell is a structure with an airtight chamber which is open to the water at the bottom, that is lowered underwater to operate as a base or a means of transport for a small number of divers. Air is trapped inside the bell by pressure of the water at the interface. These were the first type of diving chamber, and are still in use in modified form.





What is included:

Poser ERC Figure:

Diving Bell - PBR and Specular Preset



Material Options

Vintage Bell - PBR and Specular

Modern Bell - PBR and Specular



Chains and Chain Hanger PBR and Specular



M4(V4) Poses:

Diver on Bench

Diver swimming out

Diver boarding the Bench

Diver siting on the hatch

Operator Standing on Floater



Lights:

Green Cabin Light

Orange Cabin Light



Props:

Chain Hanger, Upper Chain (can be multiplicated)



Scaled to poser people, up to 4kx4k textures, product is intended for closeups, midrange and distant shots, selected dials with limits on, fully rigged figure is suitable for animations. Unpacked Runtime Size: 159 MB. Original Design, Real Life Inspiration.