Thingiverse
Direct Drive V6 MGN12C Mount by BavarianMaker
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is my poorly designed mount for my Ender 3 with MGN12C linear rail on the X-axis.
The extruder is a BMG Clone with a v6 hotend clone.
I used a pancake stepper motor and was able to put cooling block on the back.
No shortening of the X-axis range but a few mm in Y-axis range.
As part cooling i remixed the Biqu H2 Fan Duct: https://www.thingiverse.com/thing:4682915
which unfortunately needs to be glued to the Mount (make sure the Hotend is in place so you don´t get a bad surprise when it doesn´t fit anymore)
And for attaching the belt i used this awesome part: https://www.thingiverse.com/thing:212873
For which you probably can NOT use the original belt as it has the brass crimping and is probably to short.
Probe offset should be X: -30 Y: 0
I advise you to print it in ABS or something similar, not PETG because it will deform as far as my experience went.
Assembly:
Screw the mount to the sled of your linear rail.
BMG and Hotend assembly screw against the plate with the Motor.
Attach the Fans and the BL-Touch.
Test fit the fan duct with or without a silicone heatblock sock, make sure you have enough space vertically between the nozzle and the duct and glue it in place.
Setup your Nozzle offset.
Happy printing.
The extruder is a BMG Clone with a v6 hotend clone.
I used a pancake stepper motor and was able to put cooling block on the back.
No shortening of the X-axis range but a few mm in Y-axis range.
As part cooling i remixed the Biqu H2 Fan Duct: https://www.thingiverse.com/thing:4682915
which unfortunately needs to be glued to the Mount (make sure the Hotend is in place so you don´t get a bad surprise when it doesn´t fit anymore)
And for attaching the belt i used this awesome part: https://www.thingiverse.com/thing:212873
For which you probably can NOT use the original belt as it has the brass crimping and is probably to short.
Probe offset should be X: -30 Y: 0
I advise you to print it in ABS or something similar, not PETG because it will deform as far as my experience went.
Assembly:
Screw the mount to the sled of your linear rail.
BMG and Hotend assembly screw against the plate with the Motor.
Attach the Fans and the BL-Touch.
Test fit the fan duct with or without a silicone heatblock sock, make sure you have enough space vertically between the nozzle and the duct and glue it in place.
Setup your Nozzle offset.
Happy printing.
Similar models
thingiverse
free
Linear Rail BMG Extruder V6 hotend Adapter for KP3S w/ 5015 fan by Artifical
...l allow you to mount a bmg extruder onto the exist rail block with a direct v6 hotend
integrated cooling duct and 5015 fan mount
thingiverse
free
E3D V6 Direct drive hotend support - LK4 Pro / U30 Pro by cristef
...i use a e3d v6 hotend with a bmg clone extruder, bltouch, a 4010 fan for hotend cooling and a 5015 radial fan for print cooling.)
thingiverse
free
Thinker S dual blower hotend - Remix for Linear Rail by dapostol73
...e you align it with the y end stop.
included an alignment tool for installing the x axis linear rail as provide from another mod.
thingiverse
free
Linear Rail x axis Dragon Hotend carriage by Mendingthings
...es the bl-touch mount and the x home switch mount into the carriage. this carriage mounts directly to a 12mm linear rail bearing.
thingiverse
free
linear rail direct drive bmg mount for ender 3
...opposite of the x motor to reduce belt tension and allow the adjustment of the belt via separate tensioner
update:
x = 28
y = -19
thingiverse
free
E3D V6 hotend with BLTouch for Linear guide and 2020 Extrusion by Chromatophore
...for the extruder idler
mk7 extruder drive gear
m3 and m4 rubber washers
short length of ptfe tube
m6 pneumatic fitting (optional)
thingiverse
free
EASYTHREED X1(SONDORY PICO - X carriage for V6 and motor mount for bowden extruder by GloSense
...mount to maintenance.
coolling fan duct is not included - i printed one of uploaded cooing fan duct in thingiverse for v6 hotend.
thingiverse
free
E3D V6 and BMG Extruder Hotend Direct Drive Fan Mount and Bltouch Mount by adjoneses
...intermods bracket, and in my opinion it makes my ender work as well if not better than my buddy's prusa. linear rails advised
thingiverse
free
Tronxy X5SA direct drive mount, BMG, V6, BL TOUCH, PART COOLING by spryguyuk
...k. removing the part fan duct will give you access to heat tighten your nozzle. (i will get a video done shortly on this process)
thingiverse
free
24mm stepper BMG mount by TRrexx
...t front-heavy, it doesn't hit z-axis on ender 3 and it fits perfectly if you use it with bullseye fan duct and e3d v6 hotend.
Bavarianmaker
thingiverse
free
MGN12C-BIQU-H2 Mount by BavarianMaker
...ltouch i used this: https://www.thingiverse.com/thing:4722930
feel free to redesign or adapt it to your liking with the step-file
thingiverse
free
Mazda Miata NB / NBFL Cup Holder by BavarianMaker
...ng heat and uv resistant as it will be in the car.
driving sharp corners and spilling the cup/can will probably not be a problem.
Mgn12C
thingiverse
free
MGN12C Carriage by renierduminy
...mgn12c carriage by renierduminy
thingiverse
remix for a mgn12c carriage
thingiverse
free
MGN12C Carriage Mount
... 20x15 screw pattern
thanks to fantasmag0ria
modular x-carriage for anet a8 / am8 / blvhttps://www.thingiverse.com/thing:2599692
thingiverse
free
BLV X Carriage Top for MGN12C
...blv x carriage top for mgn12c
thingiverse
x-carriage top for mgn12c sliding block
thingiverse
free
MGN12C and MGN12H adapter plate by 3r4th
...h
thingiverse
i created a adapter plate for the y axis from mgn12c and mgn12h to a hole pattern of the sc8uu.
best regards 3r4th
thingiverse
free
MGN12C Short linear carriage by Lalala65765
...carriage block, all credit to artu66 for the original file.
actual blocks can variate by a mm or so in width depending of screws.
thingiverse
free
MGN12C Carriage Mounts for Y and Z Axis by marcbea
... pattern
here are the y and z axis mounts that will work with mgn12c carriages should you have gotten these instead of the mgn12h
thingiverse
free
Remixed Voron Switchwire Blocks for MGN12C rails by RedWhere2020
...r mgn12c rails by redwhere2020
thingiverse
the blocks have been remixed to suit the mgn12c linear rails for those who need them.
thingiverse
free
MGN12C ADAPTADOR A CARRO EJE Y by AIRWALK
...erse
basándome en el gran tabajo blv mgn12 mod, he adaptado el soporte del carril mgn12c a mi carro soporte de la cama caliente.
thingiverse
free
MGN12C-BIQU-H2 Mount by BavarianMaker
...ltouch i used this: https://www.thingiverse.com/thing:4722930
feel free to redesign or adapt it to your liking with the step-file
thingiverse
free
MGN12C Linear rails for Y axis on Prusa i3 Mk3/MK3S Bear
...gn12c linear rails for y axis on prusa i3 mk3/mk3s bear, i remix it from olorf design (https://www.thingiverse.com/thing:3781079)
V6
thingiverse
free
clip intercomunicador v6 // intercom clip v6 by javitoraz
...v6 by javitoraz
thingiverse
clip para soporte de intercomunicador v6 casco moto //clip for intercom support v6 motorcycle helmet
thingiverse
free
E3D V6
...e3d v6
thingiverse
just another remix with the belt mounting points raised 5mm. not tested yet as i still do not have a v6.
thingiverse
free
3D model E3D V6 extruder
...3d model e3d v6 extruder.
e3d v6 radiator
e3d v6 volcano nozzle
e3d v6 heat break
e3d v6 heater block
e3d v6 volcano heater block
thingiverse
free
ROBOT V6 SANTINO by chirimbolo
...robot v6 santino by chirimbolo
thingiverse
robot v6
thingiverse
free
Nut V6
...ogeqn5jnbdayqq
motherboard capacitors 1000uf 16v low esrhttps://www.ebay.com.au/itm/173841745704
donatehttp://paypal.me/rixtronix
thingiverse
free
Based_vase_hex-tapped v6 by 728design
...based_vase_hex-tapped v6 by 728design
thingiverse
based_vase_hex-tapped v6
thingiverse
free
DStike v6 oled by h4x0r1
...dstike v6 oled by h4x0r1
thingiverse
for dstike v6 oled
thingiverse
free
Flower Pot V6 by 3DPino
...flower pot v6 by 3dpino
thingiverse
flower pot v6
thingiverse
free
E3D-V6 FAN by qqbbpp1234
...e3d-v6 fan by qqbbpp1234
thingiverse
e3d v6 fan
thingiverse
free
E3D-V6 Back Support
...e3d-v6 back support
thingiverse
e3d-v6 back support
Drive
thingiverse
free
USB Drive / Flash Drive / Pen Drive Case by BrosJr
...usb drive / flash drive / pen drive case by brosjr
thingiverse
spare part for a broken usb drive case.
my mom´s request :-)
thingiverse
free
Turret Drive
...turret drive
thingiverse
drive key and housing
thingiverse
free
USB Flash Drive Holder of Drives by paxamime
...ot of flash drives for various purposes so while 20 drives may sound like a lot, this is only one of 3 that i am currently using.
thingiverse
free
Ender3 Direct drive duel drive mount
...have created for the ender3 and should fit the cr10 printers. this is for the duel drive mount version not the standard version.
thingiverse
free
Drive Shaft by RedMerlin
...drive shaft by redmerlin
thingiverse
a drive shaft.
thingiverse
free
Driving Message by Mariblueruby
...driving message by mariblueruby
thingiverse
cheeky driving message
thingiverse
free
G-Drive External Hard Drive Case by EvanVS
...ve case by evanvs
thingiverse
this is a case for an external usb harddrive.
this case is designed to fit the "g-drive"
thingiverse
free
MK2 Drive Bashguards
...mk2 drive bashguards
thingiverse
bashguards for the mk2 avio at gear drive!
thingiverse
free
Harmonic drive
...harmonic drive
thingiverse
harmonic drive i made, uses 7.9 mm steal ball bearings. make sure to split into parts before printing
thingiverse
free
Waterjet Drive
...waterjet drive
thingiverse
waterjet model
Direct
thingiverse
free
IeC Direct - Basculating MK8 Direct Extruder by Immaginaecrea
...iec direct - basculating mk8 direct extruder by immaginaecrea
thingiverse
another mk8 direct extruder
thingiverse
free
Directed Numbers by hachihung
...directed numbers by hachihung
thingiverse
directed numbers model for students playing
thingiverse
free
Direct Extruder by ManfredSaemann
...direct extruder by manfredsaemann
thingiverse
conversion of the ender-6 to direct extruder with filament guide.
thingiverse
free
Directional Marker (Arrow) by Crazy_Diver_84
...directional marker (arrow) by crazy_diver_84
thingiverse
directional marcer for cavediving
thingiverse
free
Direct Drive Delta by gustofusion
...direct drive delta by gustofusion
thingiverse
direct drive delta
thingiverse
free
Direct Drive Extruder by djBo
...ig big fan of this)
compact bowden extruder
one piece simple direct drive extruder
mariusmartin's direct drive extruder
thingiverse
free
Sapphire Pro bowden to direct
...sapphire pro bowden to direct
thingiverse
bracket model for direct extruder.
thingiverse
free
cable manager for zav direct
...cable manager for zav direct
thingiverse
cable manager for zav direct
thingiverse
free
Direct mounting NEMA17 by adolf81
...direct mounting nema17 by adolf81
thingiverse
direct mounting nema17 for cnc
thingiverse
free
Sunlu direct extruder by masbytes
...sunlu direct extruder by masbytes
thingiverse
adapter for direct extruder for sunlu s8
Mount
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount