Diatone R349 DJI Caddx Vista Conversion Kit by jonbean

Last crawled date: 3 years, 4 months ago

This is a dji digital fpv conversion kit for the diatone r349; you'll need to:
1) Replace the default stack with the GEPRC toothpick 20A aio board (https://geprc.com/product/gep-20a-f4-aio/). Note that this board will be elevated so the motor leads should not be soldered in place until you are done putting everything else in place (indeed I suggest that you assembling everything without soldering anything together to see how things fit, then disassemble and plan your soldering order!)
2) To assemble:
(a) Install the vista
(b) Install the 3d printed mating plate, and then the aio board.
(c) To make room for this new stack & the DJI camera, spacers are installed under the canopy in both front and back (and the rear plastic piece between the mounting posts is removed).
(d) to fit the DJI camera (nobody likes the nebula... ick!), it will be necessary to cut the canopy a little bit- this part is self-explanatory; to hold the camera in place I used liquid electrical tape, because the screws don't QUITE fit.
3) Enjoy!