Thingiverse
Diaphragm Air Engine by TomStanton
by Thingiverse
Last crawled date: 3 years, 4 months ago
Please use this product at your own risk and always wear eye and ear protection!
Do not pressurise this engine without carrying out safe pressure tests. 3D print qualities vary and will not guarantee that the bottle cap/cylinder head can cope with high pressures.
Video for more info: https://www.youtube.com/watch?v=5B1H5syp4PM
Print info:
Material: PLA (I prefer PLA as it's easy to get strong layer strength)
Nozzle diameter - 0.4mm
Print width - 0.5mm
Layer height - 0.2mm
Cylinder Head Print info:
Top/Bottom layers - 6
Outer walls - 6 (enable single wall preimeters for the cylinder volume fins)
Infill - 30%
Nozzle Temperature - 220c (Recommend 5-10c hotter than usual for extra strength)
Bed temperature - 50c
Other Parts Print info: (Can use your usual print settings, these are mine)
Top/Bottom layers - 3
Outer walls - 2
Infill - 15%
Nozzle Temperature - 210c
Bed temperature - 50c
Required Hardware:
13pcs M2x10 Bolts
6pcs M2 Nuts
4pcs MR128 8x12x2.5mm bearings
1pcs 0.5mm Viton Rubber Sheet
2pcs Oring (7mm Outside diameter 2mm Cross section)
1pcs 6mm Ball bearing
1pcs Brass tube 3mm Outside Dia 2mm Inside Dia (Need atleast 25mm to cut for conrod inserts and piston tube)
1pcs 1mm Steel wire (piston pin)
1pcs M3x10mm bolt (propeller adaptor attachment)
2pcs M3x6mm bolts (mount T-style propeller)1pcs 1/8 BSP pneumatic fitting1pcs O-ring (21mm Outside diameter 2.5mm Cross section diameter)
*Depending on which cylinder head you choose to use, you'll need either of these, not both.
Hole in the diaphragm needs to be 4mm and I recommend using a hole punch as cutting with a knife can result in the diaphragm tearing after little use.
The length of the brass tube and pin on the piston needs to be exactly the correct length or the engine won't run. I've attached an image of the length (brass tube 4mm from piston top, pin 10mm from piston top).
Do not pressurise this engine without carrying out safe pressure tests. 3D print qualities vary and will not guarantee that the bottle cap/cylinder head can cope with high pressures.
Video for more info: https://www.youtube.com/watch?v=5B1H5syp4PM
Print info:
Material: PLA (I prefer PLA as it's easy to get strong layer strength)
Nozzle diameter - 0.4mm
Print width - 0.5mm
Layer height - 0.2mm
Cylinder Head Print info:
Top/Bottom layers - 6
Outer walls - 6 (enable single wall preimeters for the cylinder volume fins)
Infill - 30%
Nozzle Temperature - 220c (Recommend 5-10c hotter than usual for extra strength)
Bed temperature - 50c
Other Parts Print info: (Can use your usual print settings, these are mine)
Top/Bottom layers - 3
Outer walls - 2
Infill - 15%
Nozzle Temperature - 210c
Bed temperature - 50c
Required Hardware:
13pcs M2x10 Bolts
6pcs M2 Nuts
4pcs MR128 8x12x2.5mm bearings
1pcs 0.5mm Viton Rubber Sheet
2pcs Oring (7mm Outside diameter 2mm Cross section)
1pcs 6mm Ball bearing
1pcs Brass tube 3mm Outside Dia 2mm Inside Dia (Need atleast 25mm to cut for conrod inserts and piston tube)
1pcs 1mm Steel wire (piston pin)
1pcs M3x10mm bolt (propeller adaptor attachment)
2pcs M3x6mm bolts (mount T-style propeller)1pcs 1/8 BSP pneumatic fitting1pcs O-ring (21mm Outside diameter 2.5mm Cross section diameter)
*Depending on which cylinder head you choose to use, you'll need either of these, not both.
Hole in the diaphragm needs to be 4mm and I recommend using a hole punch as cutting with a knife can result in the diaphragm tearing after little use.
The length of the brass tube and pin on the piston needs to be exactly the correct length or the engine won't run. I've attached an image of the length (brass tube 4mm from piston top, pin 10mm from piston top).
Similar models
thingiverse
free
Compressed Air Engine by TomStanton
... with a yellow cap)
1200 grit wet/dry sand paper
scissors
vice or clamp
1.5mm hex driver
2mm hex driver
drill & 6mm drill bit
grabcad
free
Compressed Air Engine
... with a yellow cap)
1200 grit wet/dry sand paper
scissors
vice or clamp
1.5mm hex driver
2mm hex driver
drill & 6mm drill bit
grabcad
free
A n50 version worm-gear reduction gearbox
...g(2mm*5mm*2mm) 2pcs
n20 dcmotor shaft length 5mm shaft diameter 1mm 1pcs
1mm center hole interference fit m0.4 8z brass gear 1pcs
thingiverse
free
spool holder for profile delta lightweight by codavr
...crew m4 bolts, thread length 6mm: 4pcs
printed:
rod 1: 2pcs
rod 2: 2pcs
joint 1: 2pcs
joint 2: 1pcs
joint 3: 1pcs
pla amount: 50g
grabcad
free
another version worm gearbox used n50 DC motor
...g(2mm*5mm*2mm) 2pcs
n20 dcmotor shaft length 5mm shaft diameter 1mm 1pcs
1mm center hole interference fit m0.4 8z brass gear 1pcs
thingiverse
free
UlTi Steel top cover by avolkov1987
...mm.dxf - 2pcs
back_glass_3mm.dxf - 1pcs
upper_glass_3mm.dxf - 1pcs
https://aliexpress.ru/item/32936762466.html - hygrometer gauge
thingiverse
free
DIY headphones (driver support for Weize Ear Muffs) by rokyed
...)
made for weize wz-5002b earmuff
prints with 0.5mm nozzle, supports, raft and brim (5mm) layer height 0.4mm, first layer 0.35mm.
grabcad
free
PISTON HEAD
...the pressure and temperature of the combustion products directly. the shape of the cylinder piston varies according to the needs.
grabcad
free
Piston pin
...piston pin
grabcad
piston pin for single cylinder engine used to connect piston head with crank rod
grabcad
free
PISTON
...the pressure and temperature of the combustion products directly. the shape of the cylinder piston varies according to the needs.
Tomstanton
thingiverse
free
TSX200 HS1177 Camera Bracket by TomStanton
...tsx200 hs1177 camera bracket by tomstanton
thingiverse
tsx200 hs1177 fpv camera bracket
thingiverse
free
Stanton Frames TSX200 GoPro Mount by TomStanton
...stanton frames tsx200 gopro mount by tomstanton
thingiverse
gopro mount for a tsx200 frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro Mount V2 by TomStanton
...tsx frame gopro mount v2 by tomstanton
thingiverse
v2 35 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro 30 Degree Mount by TomStanton
...tsx frame gopro 30 degree mount by tomstanton
thingiverse
30 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro 40 Degree Mount by TomStanton
...tsx frame gopro 40 degree mount by tomstanton
thingiverse
40 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro 25 Degree Mount by TomStanton
...tsx frame gopro 25 degree mount by tomstanton
thingiverse
25 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
TSX Frame GoPro 35 Degree Mount by TomStanton
...tsx frame gopro 35 degree mount by tomstanton
thingiverse
35 degree gopro mount for a tsx frame (www.stantonframes.co.uk)
thingiverse
free
HS1177 Mount - Stanton Frames by TomStanton
...ra with a tsx mini quad frame (www.stantonframes.co.uk)
you will require longer self tapping screws (5-6mm) to secure the hs1177.
thingiverse
free
Emax 2205 motor protectors by TomStanton
... they pop off.
clip on like this: https://www.youtube.com/watch?v=wron-nuuwwi
i printed with abs, 100% infill, 0.2mm layer height
thingiverse
free
3D Printed wing by TomStanton
... and wingspan of the print is 200mm, but can be added together for any chosen length.
https://www.youtube.com/watch?v=lowlw4bzndw
Diaphragm
turbosquid
$79
Diaphragm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Diaphragm Stool
... model diaphragm stool for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1219186)
turbosquid
$59
Diaphragm Muscle group
... muscle group for download as ma, c4d, lwo, max, lwo, and obj on turbosquid: 3d models for games, architecture, videos. (1519897)
cg_studio
$49
Human Diaphragm Anatomy3d model
...max .mb .lxo .fbx .c4d .3ds - human diaphragm anatomy 3d model, royalty free license available, instant download after purchase.
3d_export
$49
Human Diaphragm 3D Model
...atomy characters torso
human diaphragm 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl digitallab3d 106460 3dexport
3d_export
$44
Diaphragm Muscle Group
... in mammals. it plays a major role in breathing, as its contraction increases the volume of the thorax and so inflates the lungs.
3d_export
$49
Human Diaphragm Anatomy 3D Model
...ation internal
human diaphragm anatomy 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl digitallab3d 102506 3dexport
3d_export
$44
Human Diaphragm
... in mammals. it plays a major role in breathing, as its contraction increases the volume of the thorax and so inflates the lungs.
3d_export
$14
zrj5-m series hydraulic diaphragm metering pump
...zrj5-m series hydraulic diaphragm metering pump
3dexport
zrj5-m series hydraulic diaphragm metering pump
turbosquid
free
Mechanical Blade Iris Diaphragm Aperture
...re for download as 3ds, dxf, obj, wrl, c4d, fbx, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1474115)
Air
3ddd
$1
Calligaris air
...calligaris air
3ddd
air , calligaris
cтул calligaris air
3ddd
$1
Air freshener
...air freshener
3ddd
air freshener , освежитель
air freshener
design_connected
$16
Air
...air
designconnected
flexform air lounge chairs computer generated 3d model. designed by antonio citterio.
turbosquid
$250
Heat pump air air
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
air
...air
3dexport
3ddd
$1
Кухня AIR
...кухня air
3ddd
air , мария
кухня air фабрики "мария"
3ddd
$1
Лампа AIR
...лампа air
3ddd
boconcept , air
настольная лампа air, boconcept. в50½xø32см
3d_export
$40
air deflector
...air deflector
3dexport
air deflector
3d_export
$15
air purifier
...air purifier
3dexport
air purifier
3d_export
$5
macbook air
...macbook air
3dexport
macbook air
Engine
3d_export
$5
engine
...engine
3dexport
engine
3d_export
free
Engine
...engine
3dexport
engine
archibase_planet
free
Engine
...engine
archibase planet
motor engine
engine - 3d model for interior 3d visualization.
archibase_planet
free
Engine
...engine
archibase planet
motor engine mover
engine n170708 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Engine
...engine
archibase planet
engine locomotive train
locomotive - 3d model for interior 3d visualization.
turbosquid
$1
ENGINE
...osquid
royalty free 3d model ic engine for download as sldas on turbosquid: 3d models for games, architecture, videos. (1382781)
3d_export
$5
engine
...engine
3dexport
3d_export
free
engine
...engine
3dexport
turbosquid
$7
Engine
...d model animated engine mograph element3d for download as c4d on turbosquid: 3d models for games, architecture, videos. (1380716)
turbosquid
$1
ENGINE
...y free 3d model engine for download as max, 3ds, stl, and fbx on turbosquid: 3d models for games, architecture, videos. (1673703)