Diablo Picatinny Crossbow Quiver by happydead

Last crawled date: 3 years ago

if you download it please be kind enough to like it. I printed 90 infill for durability. rafts and support fine print. I used fiberglass rods to attach (ones u use to mark driveways for snow plow solid not hollow) 6.4mm x2 holes for rods use drill to fine tune wanted tight. used 4x #8 washers for screws going in rods. 4.53 x 15.53 mm bolts to hold raised rods in place (can glue to) use smaller bolts or screws for lower rod not as thick. will be redesigning and modifying soon but holds 5 arrows and attaches to crossbow with picatinny rail. put it on Barnette Wildcat C6 works great. picatinny might be bit tight but should go on with little effort. I didn't bother sanding and all that jaz cause plan on modifying soon ( ; printed with pla glow heated bed 110 I use painters blue tape to print on seems to do the job. rafts support and 90% infill high quality fiberglass rods 1' long
special thanks to slavikk (low poly skull) + of course fermunoz (quiver) thanks to these talented people they saved me some draw time to put this collaboration together thanks guys ( ; happy holidays and don't shoot your eye out
NOTE: use drill and drill bit to pilot holes for screws for poles use flat head screw so it does not block path of picatinny u can use flat tip screw or pointed either or but if u use pointed to grip pole pilot pole to hope this helps any ?'s message and il try to help. might try to do video later