Thingiverse
DEPRECATED: LCD 12864 RepRap Discount Anet A8 Adapter by OderWat
by Thingiverse
Last crawled date: 3 years, 1 month ago
DEPRECATION WARNING!
Be aware that this project may not work for you and is not supported in any way by me!
This allows to fully use the cheap LCD12864 from RepRap Discount as an alternative display for your Anet A8 printer.
For this to work you need to use the SkyNet3D port of the Marlin firmware. You can get this from the Facebook Support Page as package together with guides on how to setup sensors and stuff. You may also just get the current development version from the GitHub repository.
Disclaimer This "Thing" is meant for people which basically need the raw information and can handle the remaining stuff themselves. You are using this informations on your own risk. I am not responsible if your hardware breaks or your printer suddenly makes or is toast. If you need help with SkyNet3D or Marlin refer to original support!
I added some images of my working prototype. They are just to proof that it works and give an overview on how it was done. I may add more informations later on.
Until now there was only supported for the Anet A6 LCD12864 version of the full graphics display available in SkyNet3D. Afaik this is the first guide to get the LCD 12864 RepRap Discount Display controller working with the original Anet A8 board.
Creating an adapter wiring is actually easy!
Using patch cables:
A quick and easy way for people which don't want to cut their ribbon cables is to use ten breadboard "patch cables" (female to male) and stick the female part into the RepRap Connectors and the male part into the connectors of the cables. Garry did this here and I think that is a really good idea and very easy to do if you have some of those available.
Soldering:
Another way to do this is cutting the two ribbon 10 wire cables which usually come with the RepRap Discount Display. Splicing them and reconnect them using the information provided below. I was soldering them to some connectors which also keeps the cable spread out nicely."
Free Connection:
There is a free pin with this setup. I use it for my 3D-Touch sensor setup. I made the adapter so that it is fully compatible with the instructions from that description. I am happy to tell you that this setup also preserves the buzzer of the display.
The SD card slot on the display:
The SD card slot on the display is not useable (the one on the board still is). There may be the possibility to use it.
Hints (I did not test this): You need to wire all of the J3 wires and LCD:5 goes to EXP2:4 (instead of the Servo of BLTouch) this should be in the firmware LCD_SDSS = 27. You may also need/want to sacrifice the beeper and connect LCD:3 to EXP2:7 that would be the SD_DETECT_PIN = 28 in firmware.
Now for the adapter wiring itself!
It is not hard, just follow it wire by wire. It shows always originating connector:pin from Anet A8 Board > destination connector:pin on the RepRap Display.
Counting is done from the "red marked wire", which is no. 1 of the 10 cables.
The J3 connector is normally not used on your board (besides for flashing firmware with a programmer).
The LCD port is the one which your stock LCD 2004 Controller is plugged into.
The original display and the Anet board are not modified. You can always switch back.
J3 Connector on Anet Board
The connections in () are not really needed and can be omitted (yes there is only one needed with the J3).
J3:1 > -
J3:2 > -
J3:3 > (EXP2:1)
J3:4 > -
J3:5 > (EXP2:2)
J3:6 > (EXP2:6)
J3:7 > EXP2:8
J3:8 > (EXP2:9)
J3:9 > -
J3:10 > -
LCD Connector on Anet Board
LCD:1 > EXP1:9
LCD:2 > EXP1:10
LCD:3 > (Optional for BLTouch/3D-Touch)
LCD:4 > EXP2:3
LCD:5 > EXP1:1
LCD:6 > EXP2:5
LCD:7 > EXP1:3
LCD:8 > EXP1:2
LCD:9 > EXP1:4
LCD:10 > EXP1:5
Modifications in the firmware
Update: I added a commit to the SkyNet3D Development repository which contains the changes as easy to use configuration option (experimental)
Changing the firmware manually can be done by editing the pins_ANET_10.h file to address the right pins for this wiring.
#elif ENABLED(U8GLIB_ST7920)
// For RepRap Discount (with Anet Adapter wiring)
#define SERVO0_PIN 27 // free for BLTouch/3D-Touch
#define BEEPER_PIN 28
#define LCD_PINS_RS 30
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 17
/*
#define BEEPER_PIN 17
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 28
#define LCD_PINS_D4 30
*/
#define ST7920_DELAY_1 DELAY_0_NOP
#define ST7920_DELAY_2 DELAY_1_NOP
#define ST7920_DELAY_3 DELAY_2_NOP
#ifndef ENCODER_STEPS_PER_MENU_ITEM
To enable this display in the firmware you need to tell Configuration.h to use it:
//#define ANET_KEYPAD_LCD
#define ANET_FULL_GRAPHICS_LCD
Have fun with the cheap controller and a nice and much easier to use printer!
Be aware that this project may not work for you and is not supported in any way by me!
This allows to fully use the cheap LCD12864 from RepRap Discount as an alternative display for your Anet A8 printer.
For this to work you need to use the SkyNet3D port of the Marlin firmware. You can get this from the Facebook Support Page as package together with guides on how to setup sensors and stuff. You may also just get the current development version from the GitHub repository.
Disclaimer This "Thing" is meant for people which basically need the raw information and can handle the remaining stuff themselves. You are using this informations on your own risk. I am not responsible if your hardware breaks or your printer suddenly makes or is toast. If you need help with SkyNet3D or Marlin refer to original support!
I added some images of my working prototype. They are just to proof that it works and give an overview on how it was done. I may add more informations later on.
Until now there was only supported for the Anet A6 LCD12864 version of the full graphics display available in SkyNet3D. Afaik this is the first guide to get the LCD 12864 RepRap Discount Display controller working with the original Anet A8 board.
Creating an adapter wiring is actually easy!
Using patch cables:
A quick and easy way for people which don't want to cut their ribbon cables is to use ten breadboard "patch cables" (female to male) and stick the female part into the RepRap Connectors and the male part into the connectors of the cables. Garry did this here and I think that is a really good idea and very easy to do if you have some of those available.
Soldering:
Another way to do this is cutting the two ribbon 10 wire cables which usually come with the RepRap Discount Display. Splicing them and reconnect them using the information provided below. I was soldering them to some connectors which also keeps the cable spread out nicely."
Free Connection:
There is a free pin with this setup. I use it for my 3D-Touch sensor setup. I made the adapter so that it is fully compatible with the instructions from that description. I am happy to tell you that this setup also preserves the buzzer of the display.
The SD card slot on the display:
The SD card slot on the display is not useable (the one on the board still is). There may be the possibility to use it.
Hints (I did not test this): You need to wire all of the J3 wires and LCD:5 goes to EXP2:4 (instead of the Servo of BLTouch) this should be in the firmware LCD_SDSS = 27. You may also need/want to sacrifice the beeper and connect LCD:3 to EXP2:7 that would be the SD_DETECT_PIN = 28 in firmware.
Now for the adapter wiring itself!
It is not hard, just follow it wire by wire. It shows always originating connector:pin from Anet A8 Board > destination connector:pin on the RepRap Display.
Counting is done from the "red marked wire", which is no. 1 of the 10 cables.
The J3 connector is normally not used on your board (besides for flashing firmware with a programmer).
The LCD port is the one which your stock LCD 2004 Controller is plugged into.
The original display and the Anet board are not modified. You can always switch back.
J3 Connector on Anet Board
The connections in () are not really needed and can be omitted (yes there is only one needed with the J3).
J3:1 > -
J3:2 > -
J3:3 > (EXP2:1)
J3:4 > -
J3:5 > (EXP2:2)
J3:6 > (EXP2:6)
J3:7 > EXP2:8
J3:8 > (EXP2:9)
J3:9 > -
J3:10 > -
LCD Connector on Anet Board
LCD:1 > EXP1:9
LCD:2 > EXP1:10
LCD:3 > (Optional for BLTouch/3D-Touch)
LCD:4 > EXP2:3
LCD:5 > EXP1:1
LCD:6 > EXP2:5
LCD:7 > EXP1:3
LCD:8 > EXP1:2
LCD:9 > EXP1:4
LCD:10 > EXP1:5
Modifications in the firmware
Update: I added a commit to the SkyNet3D Development repository which contains the changes as easy to use configuration option (experimental)
Changing the firmware manually can be done by editing the pins_ANET_10.h file to address the right pins for this wiring.
#elif ENABLED(U8GLIB_ST7920)
// For RepRap Discount (with Anet Adapter wiring)
#define SERVO0_PIN 27 // free for BLTouch/3D-Touch
#define BEEPER_PIN 28
#define LCD_PINS_RS 30
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 17
/*
#define BEEPER_PIN 17
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 28
#define LCD_PINS_D4 30
*/
#define ST7920_DELAY_1 DELAY_0_NOP
#define ST7920_DELAY_2 DELAY_1_NOP
#define ST7920_DELAY_3 DELAY_2_NOP
#ifndef ENCODER_STEPS_PER_MENU_ITEM
To enable this display in the firmware you need to tell Configuration.h to use it:
//#define ANET_KEYPAD_LCD
#define ANET_FULL_GRAPHICS_LCD
Have fun with the cheap controller and a nice and much easier to use printer!
Similar models
thingiverse
free
Ramps 1.4 with Anet display and external SD card reader by stefankck
...:4
exp2:4 - sd:cs
exp2:5 - lcd:6
exp2:6 - sd:det (7th pin on socket)
exp2:7 - sd:mosi
exp2:8 - j3:7
exp2:9 -
exp2:10 -
thingiverse
free
Anet 32bit by Far_a_way
...d now works with this.
all other settings are normal in the configuration.h or
configuration_adv.h made.
this was my anet e12 ;-)
thingiverse
free
Anet A8 - RepRapDiscount Full Graphic LCD Holder by MasterFX
...o approx 19cm!
if you don't want to lose build height just use the bottom holes and screw them in the top holes of the frame.
thingiverse
free
Anet A8 Reset Button Frame
...tton cover (https://www.thingiverse.com/thing:2078881) partially hides the j3 connector on the a8 board, so i adapted the design.
thingiverse
free
3D touch Black Anet A8 Left_Mount by zerone82
...ne z_min_endstop_inverting false
#define z_min_probe_endstop_inverting false
comment
//#define probe_manually
wiring as per image
thingiverse
free
LCD Display mount, right side remix by devonjones
...e right side of the prusa i3.
needs the other two parts from "lcd display mount for reprap discount full lcd display"
thingiverse
free
Anet A6 : Auto Leveling bed AND Cable chain ! by Athanasus
... : https://www.facebook.com/skynet3ddevelopment/
don't forget to replace "configuration.h" file by this one for a6.
thingiverse
free
RepRap discount 2004 LCD Display cover for Hypercube by agnus
...apt it to the hypercube reprap discount smart display mount (https://www.thingiverse.com/thing:2084725).
you need 4 m3x20 screws.
thingiverse
free
SkyNet 2.3.2 Display-Mod - FAN-SPEED by OtterNas3
...ation_adv.h file like this:
// #define display_fan_speed
upload to your printer and done!
have fun and happy printing!
moo,
otter
thingiverse
free
Anet A8 LCD 2004 Adapter + Cover by br34ker
...iverse
this is an adapter to mount a lcd 2004 display (e.g. for ramps 1.4) to the original anet a8 frame.
the cover is included
Oderwat
thingiverse
free
Cat Litter Scoop "Detector" by OderWat
...print a cat litter scoop since i got an 3d printer. now 1 1/2 years later i finally did it! have fun and greet your cats from me!
thingiverse
free
Arya Stark's Needle - Blade / Hilt adapter. by OderWat
... mount the blade into the hilt. i used it for my make of the original arya stark's sword, which you can find in the original.
thingiverse
free
Paint Kraken for Vallejo paints by OderWat
...es twelve bottles per level and can easily be stacked up to four times. the current design also contains a rotating base and lid.
thingiverse
free
Funnel Spoon Rev 2 by OderWat
...priority. the design works pretty well, so i thought i share the design with you.
see it in action: https://youtu.be/x21wrc9wdjq
thingiverse
free
Female Mask Fixed by OderWat
...ems with my linear bearings. i got y and x axis layer and single line shifts. i guess it is also a nice test for your hardware :)
thingiverse
free
Knitting Wool Hank Tool by OderWat
... to mount the bolts and nuts inside the plastic parts.
p.s.: i wonder if anybody here will make one! please tell me if you did!11
thingiverse
free
CaliCross by OderWat
...our printer i suggest reading:
http://reprap.org/wiki/triffid_hunter%27s_calibration_guide
http://www.thingiverse.com/thing:52946
thingiverse
free
First Layer Target by OderWat
...still i don't believe much into adjust steps as those are basically a constant for a given design. but that is another topic.
thingiverse
free
Anet A8 Dial Indikator Holder (Snugfit) by OderWat
...pretty easy to get.
i added the source file so you can adjust it to your tastes. be warned: it is not the cleanest design though!
thingiverse
free
Card Clip - Spades by OderWat
... ez-stick hot and it works pretty good. the model stands and stays perfectly in place even with the fairly small contact surface.
Deprecated
thingiverse
free
Battery Holder (deprecated) by RFZ
...ng springs etc... use these!
18650 li-ion battery-holder.
use with copper tape (model 1) or wrap wires around contacts (model 2).
thingiverse
free
Nintendo Switch Case (deprecated) by Zippitybamba
...ed for this build results in the clips being weak. i may return and revise, but for now please use the switchbox linked to above.
unity_asset_store
$39
Lowpoly Modular Armors v.1 - DEPRECATED PACKAGE
...armors v.1 - deprecated package asset from polytope studio. find this & other humanoids options on the unity asset store.
thingiverse
free
60mm Fan Adapters - Deprecated by DarkAlchemist
...eased while putting out more cfm than a 60mm can do.
there are extra tall versions (30mm taller) that allow more airflow to pass.
thingiverse
free
80mm Fan Adapters - Deprecated by DarkAlchemist
...ased while putting out more cfm than an 80mm can do.
there are extra tall versions (30mm taller) that allow more airflow to pass.
thingiverse
free
Motorcycle Headlight Bracket (deprecated) by berryd
... brackets. included sizing for 43, 50, and 55mm fork tubes. untested, and not exactly parametric, but maybe useful for someone.
thingiverse
free
40mm Fan Adapters - Deprecated by DarkAlchemist
...ver do.
for the 120mm, 92mm, and the 80mm fan mounts there are extra tall versions (30mm taller) that allow more airflow to pass.
thingiverse
free
RepRap Simpson (Gada Prize Silver Medalist) DEPRECATED by nseward
...olume: about 10l
build area: about 350mm diameter
build height: 190mm
speed: >200mm/s
realistic print speed: 60mm/s
cost: $390
thingiverse
free
[Deprecated] Dactyl ManuForm Mini v2 Split Mechanical Keyboard Case by l4u
...ersion 2
source: http://github.com/l4u/dactyl-manuform-mini-keyboard
updated version at https://www.thingiverse.com/thing:2959294
thingiverse
free
Manual 1980s Style Juicer - Deprecated. by DarkAlchemist
...the juicer all the way inside and this time squeeze the citrus fruit. out of the small hole will come forth the seed free juice.
12864
3d_export
$10
Eros Due 2 pillows sofa 3D Model
...sofa eros due 2 pillows sofa 3d model boroda 12864 ...
3d_ocean
$13
Black Wood Cabinet with Drawers
...black wood cabinet with four drawers. poly: 25388 vert: 12864 ...
3d_export
$7
Female Hair Style 04
...into blender 3.1<br>verts: 6825<br>edges : 13252<br>faces : 6436<br>tris : 12864lt;br>as an emoticon, custom 3d explainer videos, presentation movies, animation...
3d_export
$28
0001-07 alligator
...assorted ornaments vol 1<br>high/lod0<br>- number triangles, 25724<br>- number points, 12864lt;br>- file types<br>- -- obj, png, exr<br>- texture types<br>- --...
thingiverse
free
12864 mount by hackqiang
...12864 mount by hackqiang
thingiverse
12864 mount
thingiverse
free
Case LCD 12864 by Tharles
...case lcd 12864 by tharles
thingiverse
case 12864
no tested
thingiverse
free
LCD Smartcontrol 12864 by 3dboxpro
...lcd smartcontrol 12864 by 3dboxpro
thingiverse
lcd smartcontrol 12864
thingiverse
free
LCD 12864 knob by EWadsager
...lcd 12864 knob by ewadsager
thingiverse
simple knob for lcd 12864
thingiverse
free
12864 Lcd mount
...12864 lcd mount
thingiverse
just mashed up this lcd front with a 12864 mount i found on thingiverse. i havent printed it yet.
thingiverse
free
Housing for lcd 12864 by luphaxio
...housing for lcd 12864 by luphaxio
thingiverse
housing for lcd 12864
no need screws to anchor the frame
Reprap
turbosquid
$1
Go Pro Balance Hand Wand Reprap
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
thingiverse
free
Reprap keychain by AndreasD
...reprap keychain by andreasd
thingiverse
a simple reprap logo keychain for the reprap lovers like me!
thingiverse
free
REPRAP CHASSIS by leonk
...reprap chassis by leonk
thingiverse
reprap chassis
thingiverse
free
COUPLER RepRap by leonk
...coupler reprap by leonk
thingiverse
coupler reprap
thingiverse
free
RepRap Switch by n3opl4n
...reprap switch by n3opl4n
thingiverse
switch for reprap prusa i2.
p-space hackerspace logo.
thingiverse
free
Reprap pendulum by mr_seeker
...ap pendulum by mr_seeker
thingiverse
its a pendulum in the shape of the reprap logo. it has a 1mm hole for putting a wire in it.
thingiverse
free
RepRap Ornament by redskinsjbs
...reprap ornament by redskinsjbs
thingiverse
i tried to make a teardrop shape ornament for the holiday season in honor of reprap
thingiverse
free
Spool holder reprap by mdnm
...spool holder reprap by mdnm
thingiverse
this is spool holder for reprap.
thingiverse
free
RepRap logo keyring by mrjohnc
...reprap logo keyring by mrjohnc
thingiverse
reprap logo keyring
thingiverse
free
REPRAP LEON K by leonk
...reprap leon k by leonk
thingiverse
reprap leon k
Discount
turbosquid
free
Discount
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
flower discounts
...flower discounts
3ddd
кашпо , цветы
flower discounts
turbosquid
$20
Chair (Discounted)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
DISCOUNT Rugs Ikea
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Discount furniture 3D Model
...discount furniture 3d model
3dexport
furnitures chairs armchairs sofa garden
discount furniture 3d model eric_s3e 25542 3dexport
3d_export
$5
Leaf Autumn discount sale 3D Model
...eaf autumn discount sale 3d model
3dexport
leaf autumn discount sale
leaf autumn discount sale 3d model astore2006 87060 3dexport
3d_export
$5
3d market discount sign model
...rket discount sign, can be an impressive element for your projects. easy to use, realistic image, low polygon, quality materials.
turbosquid
$30
Snowy rocky mountains with 10 percent Discount
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Two rocky mountains with 10 percent discount
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$70
4 High Quality mountains Landscape2. 15pct Discount
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
A8
turbosquid
$47
Car A8
...
turbosquid
royalty free 3d model car a8 for download as max on turbosquid: 3d models for games, architecture, videos. (1196060)
turbosquid
$50
Audi A8
...yalty free 3d model audi a8 for download as 3dm, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1580187)
turbosquid
$15
Audi A8
...lty free 3d model audi a8 for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1387519)
turbosquid
$500
Audi A8
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
Audi A8 3D Model
...audi a8 3d model
3dexport
audi a8 cars car
audi a8 3d model ma 20351 3dexport
3d_export
$5
Audi A8 3D Model
...audi a8 3d model
3dexport
3d model of audi a8
audi a8 3d model badyaka 12136 3dexport
3d_ocean
$89
Audi A8 2010
...usiness car car class class f f german german luxury luxury s s s8 s8 sedan sedan vehicle vehicle
new audi a8 2010 detaled model.
turbosquid
$39
A8 2018
...a8 2018 for download as 3ds, obj, wrl, c4d, fbx, dae, and stl on turbosquid: 3d models for games, architecture, videos. (1345349)
turbosquid
free
audi a8 l
...rbosquid
royalty free 3d model audi a8 l for download as obj on turbosquid: 3d models for games, architecture, videos. (1663016)
3d_ocean
$45
Audi A8 restyled
...our door vehicle was created in blender3d 2.62.realistic renderings were created with yafaray 0.1.2 realistic plugin.rendering...
Anet
thingiverse
free
Anet by derbodesign
...anet by derbodesign
thingiverse
logo anet
thingiverse
free
Anet e10 , Anet v1.0 by jonathan_943D
...anet e10 , anet v1.0 by jonathan_943d
thingiverse
soporte de ventilador de 80mm, para controladora anet v1.0
thingiverse
free
Anet A8 Anet AM8 Y belt holder
...anet a8 anet am8 y belt holder
thingiverse
anet a8 anet am8 y belt holder
thingiverse
free
Anet A8 Probe Bracket for anet sensor by chelrix
...anet a8 probe bracket for anet sensor by chelrix
thingiverse
anet a8 probe bracket for anet official sensor and marlin firmware
thingiverse
free
Anet logo by JUST3D_PRNTNG
...anet logo by just3d_prntng
thingiverse
anet logo
thingiverse
free
Fan nozzle for Anet A8 with original Anet levelsensor by peteruhlmann
...et levelsensor by peteruhlmann
thingiverse
here is an improved fan nozzle for the anet a8 with original level sensor from anet.
thingiverse
free
Anet Et4 Box
...anet et4 box
thingiverse
tool box for anet et4
thingiverse
free
Anet Logo by Superflex_Plastic_Fantastic
...anet logo by superflex_plastic_fantastic
thingiverse
anet logo to incorporate into designs.
thingiverse
free
Box for Anet ET4
...box for anet et4
thingiverse
this is a simple box for tool of anet et4
thingiverse
free
Anet V1.0 Board Kühlung (80mm Lüfter) / Anet A8 by MadCre8
...anet v1.0 board kühlung (80mm lüfter) / anet a8 by madcre8
thingiverse
anet v1.0 board kühlung (80mm lüfter) / anet a8
Lcd
turbosquid
$20
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
lcd
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LCD
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Noti Lcd Sofa
...noti lcd sofa
3ddd
noti , lcd
3d model of noti lcd sofa
3d_ocean
$7
Lcd tube wall
...hrome electronic electronic lcd tv videowall
lcd tube wall you can put in the lcd your own texture or movie in it and animate it.
Adapter
3d_export
$10
Adapter 3D Model
...adapter 3d model
3dexport
adapter
adapter 3d model mur 20260 3dexport
archive3d
free
Adapter socket 3D Model
...dapter socket adapter
adapter socket n090211 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$400
cell adaptation
...
royalty free 3d model cell adaptation for download as blend on turbosquid: 3d models for games, architecture, videos. (1701655)
archive3d
free
Adapter 3D Model
...ups pc equipment
adapter extron n180813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
usb adapter
...royalty free 3d model usb adapter for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1582234)
turbosquid
$15
Power adapter
...free 3d model power adapter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510024)
turbosquid
$8
USB adapter
...e 3d model usb adapter for download as max, fbx, obj, and dwg on turbosquid: 3d models for games, architecture, videos. (1713542)
turbosquid
$30
adapter.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Nokia Adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Universal adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.