Delta G2S Configuration for Repetier Firmware by wbrucem

Last crawled date: 3 years ago

This isn't a printable thing. It is a starting configuration for running Repetier-Firmware on the Geeetech Delta G2S printer. My printer is working beautifully on this firmware, much smoother than the old Marlin stuff, along with a number of new features. Give it a try.
To use:
Go to [https://www.repetier.com/firmware/dev/index.php]
Upload the enclosed .json file as your "old" configuration.
Complete the configuration tool steps, adjusting where needed to match YOUR printer.
At the end, choose "Download complete firmware" to retrieve the entire firmware package (.zip file).
Compile and upload to your printer as you have done with Marlin.
Further configuration changes should always be performed via the online configuration tool. DON'T edit your Configuration.h file directly.
Notes:
Pay attention to the diagram showing how to measure dimensions of your printer. Some of these may differ slightly from the ones used in Marlin.
Extruder offsets are handled entirely within the firmware. You should enter ZERO offsets in your slicer and Repetier-Host configurations.
This firmware is under active development. If you happen to download a copy that fails to compile, just try again after a couple of days. Chances are the problem will have been fixed.
Disclaimer: I am not associated with Repetier. I'm just a happy user.
Update: I'm current recommending use of the "development" version. You can still upload my posted json file as your starting configuration.