DELL 7001080-Y100 PSU Mod for Zaribo 3030 Aluminium Extrusion by murathanaraz

Last crawled date: 3 years, 1 month ago

DO THIS MOD ON YOUR OWN RISK.
This is a custom design for DELL 7001080-Y100 PSU for 3030 Aluminium Extrusions.
You need a 40x40x40 silent fan, a W1209 thermostat and a Power Switch
As this PSU is meant to work with a Dell server, it does not have a cooling system onboard so if you want to use it with your 3d printer build, you have to add a fan because it locks it self because of overheat.
This is a bit advanced modding so if you are not familiar with electronics DON'T DO IT. For this mod you have to remove the handle and the power input of the PSU and extend the power input cables inside the PSU and take them out from the bottom. And don't forget to add a 12v cable for the fan in vice versa direction.
Use AWG14 cables for this mod. 12v ports are 3 negative and 3 positive which are paralel behind. See the picture for pin connection in order to run when you power it. With this pin mod you don't need a motherboard soft switch in order to boot the PSU.
Power Switchhttps://www.aliexpress.com/item/Red-Light-Power-Rocker-Switch-Fused-IEC-320-C14-Inlet-Power-Socket-Fuse-Switch-Connector-Plug/32679674596.html
Thermostathttps://www.aliexpress.com/item/THGS-DC-12V-Thermostats-Temperature-heat-sensor-switch-50-110-degree/32729521814.html