Deej Enclosure and Knobs by DruciferRedbeard

Last crawled date: 3 years, 4 months ago

I made this enclosure and knobs for the excellent deej project. My sliders ended up being a different size than the other models and I wanted an enclosure that had no visible screws.
Knob was remodeled from scratch but I used the bottom pattern from ezremek's knobs because it fit my sliders well. I added color changes at 6.4 and 7.0mm (on the inset-mark file).
The stabilizer file supports the back of the sliders without needing to screw them in.
I have included the bottom with and without the nano mount if you have a different microcontroller.
You will need 4 m3x8 and 1 m3x6 for the nano. I printed the bottom with supports for the screw holes and then popped them out with a bamboo skewer but you can probably get away with not using supports.
The sliders I used can be found here: https://www.amazon.com/gp/product/B07232HGS1/