Thingiverse
Deadcat FPV MicroQuad 110mm by DwarfStarFPV
by Thingiverse
Last crawled date: 3 years, 1 month ago
UPDATE: 2/28/2019 - REVISED FRAME, LESS WEIGHT (4.7g) AND STRONGER DESIGN, ALSO HOLE UP FRONT FOR AIO VTX CAMERAS SUCH AS THE AKK S2
AVAILABLE IN 8.5MM AND 8MM MOTOR MOUNTS
Build Fly Crash, you have more than 9 lives with the Deadcat frame !
Grab a Micro Scisky, KingKong NZ32, F3 FC, pretty much any brushed FC can fit on this frame
8.5mm motors (Comment if you'd like this frame for 10mm motors)
VTX setup, go for the stand alone systems because the AIOs may require some trimming of the frame
50 to 65mm props
250 to 750mah lipo
AND GO HAVE FUN !
Takes about 50 mins to print this frame and top (Use good filament ABS or Nylon)
Go subscribe to my Youtube and follow on Instagram for latest designs and frame giveaways @dwarfstardrones
Don't have a 3d printer? We sell frames, check out the store, link is on my main page.
flysmall #flydwarfstar
AVAILABLE IN 8.5MM AND 8MM MOTOR MOUNTS
Build Fly Crash, you have more than 9 lives with the Deadcat frame !
Grab a Micro Scisky, KingKong NZ32, F3 FC, pretty much any brushed FC can fit on this frame
8.5mm motors (Comment if you'd like this frame for 10mm motors)
VTX setup, go for the stand alone systems because the AIOs may require some trimming of the frame
50 to 65mm props
250 to 750mah lipo
AND GO HAVE FUN !
Takes about 50 mins to print this frame and top (Use good filament ABS or Nylon)
Go subscribe to my Youtube and follow on Instagram for latest designs and frame giveaways @dwarfstardrones
Don't have a 3d printer? We sell frames, check out the store, link is on my main page.
flysmall #flydwarfstar
Similar models
thingiverse
free
Sim FPV MicroQuad 80mm by DwarfStarFPV
...nk is on my profile page
go follow on youtube and instagram for new designs and giveaways @dwarfstardrones
flysmall #flydwarfstar
thingiverse
free
Minimal frame for 65mm props and 8.5mm motors by KevinKuwata
...e the mass to be roughly 11 grams. which is a 40% weight reduction from my other fpv microquad frame. i will update with results.
thingiverse
free
Flat turtle 65mm frame by pieromenetti
...ingiverse
remix for 65mm props.
assembled with 1103 motors, 25x25 aio fc and triangular vtx fixed on top.
14x14 micro fpv camera
thingiverse
free
AIO FC VTX-RX mounting adapter by PachRay
...ilament.
to hold vtx im using heat resistant silicone glue .
please follow instagram.com/pach.ray for updates and new projects !
thingiverse
free
Nanotron-V by TronSolo
...notron-v by tronsolo
thingiverse
this is an untested design
frame designed around hubsan x4 fc
hubsan h107c
8.5mm brushed motors
thingiverse
free
AIO FC VTX-RX mounting adapter HGLRC Zeus25 AIO , ZEUS VTX , TBS nano rx by PachRay
...aio fc vtx-rx mounting adapter hglrc zeus25 aio , zeus vtx , tbs nano rx by pachray
thingiverse
esun epa nylon at 260deg
thingiverse
free
Micro FPV Quad Frame by jason51873
...ponents used:
8.5mm brushed motors
beef's brushed board
microfrx receiver - frsky compatible
hyperion quanum elite camera/vtx
thingiverse
free
--DEPRECATED-- Tiny Whoopic - Tiny Whoop alike frame for 8.5mm Motors by HicWic
...inside motor mount, they should fit tightly (secure them with a litte spot of hot glue)
attach vtx mount to frame with 3 zip ties
thingiverse
free
HexaWoop by henbach
...
500-750mah 1s battery
ladybird props
rubber band fro holding battery
optional 2/3mm zipties for mounting the camera mount
enjoy!
thingiverse
free
Drone VTX-FC Stack spacer by siderits
...drone vtx-fc stack spacer by siderits
thingiverse
stack spacer for vtx-racerstar f4 aio flight controller.
Dwarfstarfpv
thingiverse
free
SnapChat Ring by DwarfStarFPV
...his ring. i'll print it out for you for $5 and ship it to you free ! just comment :)
enjoy this design and share your makes !
thingiverse
free
Sim FPV MicroQuad 80mm by DwarfStarFPV
...nk is on my profile page
go follow on youtube and instagram for new designs and giveaways @dwarfstardrones
flysmall #flydwarfstar
thingiverse
free
Elf 88mm Micro Camera Mount Boldclash F-02 by DwarfStarFPV
...he elf 88mm micro quad
the vtx holder can be mounted onto a 16x16mm stack.
print holder with support, i printed in flexible nylon
thingiverse
free
Shadow 95mm Microquad by DwarfStarFPV
...d
follow me on instagram for weekly updates on new microquads @3dprint_rcrt
as always print it, build it, share it and have fun !
thingiverse
free
Irangex IR8M Gimbal Retainer by DwarfStarFPV
...//www.banggood.com/irangex-irx-ir8m-2_4g-8ch-multi-protocol-transmitter-with-ppm-s_bus-mini-receiver-p-1226058.html?rmmds=myorder
thingiverse
free
Tweiner 75mm MicroFPV Quadcopter by DwarfStarFPV
...ings.
go subscribe to my youtube @ 3dprint_rcrt & follow my instagram @ 3dprint_rcrt for latest designs and frame giveaways !
thingiverse
free
250mah Lipo 6 Battery Holder by DwarfStarFPV
...uot; or "low" sides
takes about two hours to print.
enjoy !! follow on instagram @3dprint_rckc for designs every week !
thingiverse
free
Rockatansky 85mm Microquad by DwarfStarFPV
..., build it and have fun !!
if you have any questions, ask away !
follow me on instagram for cool designs every week @3dprint_rcrt
thingiverse
free
The Batarang 75mm MicroQuad by DwarfStarFPV
...-check ebay !
have any questions? ask away! download, build, fly and share !
follow on instagram for weekly designs @3dprint_rckc
Deadcat
thingiverse
free
SK450 Deadcat Runcam gimbal by KillerDave
...added a new mount with lights to fit this to my deadcat quad...
works great with the parts i had laying in the bottom of a box...
thingiverse
free
HK DeadCat Rear Light by KillerDave
...31111__turnigy_high_density_r_c_led_flexible_strip_red_1mtr_uk_warehouse_.html
this thing is low polly but it does the job great!
thingiverse
free
3dTouch probe model by deadcat
...e model by deadcat
thingiverse
this a fusion360 model of the 3dtouch to use when designing mounts. i have also included the stl.
thingiverse
free
Wellgo Pedal Cage by deadcat
...or wellgo pedals - a bit less likely to destroy your shins than the normal metal cage.
i recommend printing in abs for strength.
thingiverse
free
Basic S hook by deadcat
...verse
i use this simple hook to hang those suction cup storage basket things over my shower screen. the suction cups never work!
thingiverse
free
Garmin Nuvi 2360LT sun shade by deadcat
...360lt sun shade by deadcat
thingiverse
this is a simple sunshade that slides over the gps so you can see the screen in sunlight.
thingiverse
free
Solar rail end cap and foot by deadcat
... foot by deadcat
thingiverse
this is a foot (with grip lines) along with an end cap for a specific type of aluminium solar rail.
thingiverse
free
SK450 DeadCat GoPro/Lights Mount by KillerDave
......http://www.ebay.co.uk/itm/131546308908?_trksid=p2060353.m2749.l2649&sspagename=strk%3amebidx%3ait
they are super bright!!!
thingiverse
free
Floss 3.0 LITE - HD 7in Deadcat - Custom Mounts by zenithfpv
...rig:
top plate mount for the caddx vista
sma + brainfpv gps mounts
dji fpv camera mount
gopro hook mount
(more pics to come soon)
thingiverse
free
Garmin GPS mount by deadcat
...e it to your dash board.
print in petg or abs so it can handle heat inside your car.
note: i've added a new, stronger version
Microquad
thingiverse
free
Tie Fighter MicroQuad by Barry_Barrera
...tie fighter microquad by barry_barrera
thingiverse
fly and rnjoy your new tie fighter microquad
thingiverse
free
MicroQuad frame by cacer
...microquad frame by cacer
thingiverse
frame for microquadcopter
thingiverse
free
Shadow 95mm Microquad by DwarfStarFPV
...d
follow me on instagram for weekly updates on new microquads @3dprint_rcrt
as always print it, build it, share it and have fun !
thingiverse
free
Foldable Brushed Microquad 7mm Mounts by unclecracker
...ulflindestrom's foldable brushed microquad to fit 7mm motors instead of 8.5mm ones.
i remixed it to fit the hubsan x4 motors.
thingiverse
free
X-Frame85 MicroQuad Box by 4runner
...ilament pla black, 2.85mm
best value filament pla snowwhite, 2.85mm
montage:
quad, charger, props, lipos rein und deckel drauf...
thingiverse
free
Antenna Guard for ulflindestrom's Brushed FPV Microquad by henbach
...p://www.thingiverse.com/thing:1398182) and needed some more protection for my vtx antenna, so i made this little bolt on antenna.
thingiverse
free
Foldable Brushed Microquad Camera Mount by r1b4z01d
...croquad camera mount by r1b4z01d
thingiverse
i added some walls to hold the camera in better. i plan to print this later today.
thingiverse
free
6mm microquad with top plate by VPCTech
...es and lightened up the base plate to compensate the extra weight.
thanks to brod for the perfectly simple starting point.
cheers
thingiverse
free
MicroQuad v0.4 by mduca
...ils coming soon.
parts list
1x hobby king jr-wl-fd02r rev02 main board
4x sourced 7mm motors qr series ladybird - wltoys v939
thingiverse
free
Brushed MicroQuad
...020-10x20mm-coreless-motor-for-90mm-150mm-diy-micro-fpv-rc-quadcopter-frame-p-1106428.html?rmmds=myorder
thank you for reading :)
110Mm
3ddd
$1
Terzani / Tresor
...terzani 3d max 2013 d = 450mm a = 110mm ...
3ddd
free
Полотенца
...полотенца 3ddd полотенце polys: 17086 габаритные размеры: x-196mm, y-370mm, z-110mm размер полотенец: 700mm.x1400mm. 500mm.x900mm. цвет меняется картой tow_color, можно...
3d_export
$125
hdpe pipe coiling machine
...bearing, file simulation report, and many more. it's support 32-110mm pipes...
3ddd
$1
Бра LUX-Light BOTTLE
...ld06-3588/1+776 dimensions: 110mm x 130mm x h380mm ld06-4464/1+776 dimensions: d110mm x h380mm model info: vertices 2699 faces 5292 3ds...
3ddd
$1
NAIAD AMBER
...base height: 420mm widest body diameter: 160mm base diameter: 110mm ...
3d_export
$5
Iris diaphragm mechanism
...with the specific measurement. enjoy it. the ring has 110mm outer diameter and each component has 1.25mm...
3d_export
$19
Guerlain Kisskiss Matte Lipstick
...5 edges: 0<br>object:<br>- dimension mm: 139mm x 29mm x 110mmlt;br>- dimension cm: 13.9cm x 2.9cm x 11cm<br>- dimension m:...
thingiverse
free
Box 150mm x 110mm by kafachan
...box 150mm x 110mm by kafachan
thingiverse
box 150mm x 110mm (inside 45mm , 105mm )
thingiverse
free
PVC adapter 110mm to 60mm by Juntendo
...pvc adapter 110mm to 60mm by juntendo
thingiverse
110mm to 60mm pvc adapter.
5mm wall thickness.
thingiverse
free
Absperrschieber für Fallrohr 110mm
...se
absperrschieber passt mit einer seite in fallrohr 110mm mit dichtung und auf sie andere seite passt ein 100mm ansaugschlauch.
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.