Thingiverse
D&D Dice Tray and Carrying Case by Aethernex
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is my first attempt at 3D design and I was inspired by Wyrmwood's Adverturer's Arsenal. I chose to go with hiding the magnets in slots on the side of the "vault" so they would be less noticeable than on the top. Print two of the vaults and you can store 3 sets of dice as well as a mini. The magnets I acquired to fit those holes are more than strong enough to hold all of this, even with metal dice and a large mini.
I designed this using Tinkercad with the intent to print in woodfill and sand, stain and poly the finished product. Once dry I intend to install some foam around the dice and mini holder, as well as some felt wrapped cork in the bottom of the dice tray for rolling. I have already tested including these things and all holds together well.
These are the magnets I used: https://www.homedepot.com/p/MASTER-MAGNETICS-0-3-in-x-0-11-in-Neodymium-Rare-Earth-Magnet-Discs-10-per-Pack-07045HD/202526363
Please go easy on me as I'm just getting into 3D design and 3D printing. That being said, I'd love to receive some feedback, or requests for changes to better myself. I'm learning Fusion 360 so I can make more accurate designs.
Edit #1: I made the dice areas a little deeper to accept better foam and allow slightly larger dice. I also adjusted the size of the plugs to verify they are the proper size to fit in the holes.
Edit #2: I made a new version that has completely contained magnets so there is no longer a need for the plugs. This creates a better aesthetic and more secure finish, plus the post processing is a bit simpler to accomplish this way. To accomplish this you must use your slicer to put a pause in the gcode right before it starts the layer where it would cover the magnet holes. It would also be pertinent to ensure the extruder won't be paused over one of the holes, so ensure that you've configured the extruder to move away from your print. My extruder does have a screw that attaches it to the hot end and the magnets are strong enough to pull out of their holes onto this bit, so applying a small drop of glue to the base of the magnet is key, but be sure not to have this glue tough the top layer of your print otherwise you may run into problems. Also, make sure you pay attention to the polarity of your magnets to ensure they will attract the other half, rather than repel. I have also adjusted the finger holds a bit so they run the entire length of the vault instead of just by the mini location. This will ensure a better grip and easier separation of the two halves without disturbing your dice or mini. I will leave the other models up for anyone who doesn't want to this this work, but I've also included a new photo of a print I did in natural PLA so you can see how it comes out when done right.
Edit 11/26/2018: I've uploaded a newer version of this model that I feel is better to hold and use, as well as a bit nicer looking. I don't have any photos of the completed items right now, but I have printed in wood with magnets and all works perfectly.
I designed this using Tinkercad with the intent to print in woodfill and sand, stain and poly the finished product. Once dry I intend to install some foam around the dice and mini holder, as well as some felt wrapped cork in the bottom of the dice tray for rolling. I have already tested including these things and all holds together well.
These are the magnets I used: https://www.homedepot.com/p/MASTER-MAGNETICS-0-3-in-x-0-11-in-Neodymium-Rare-Earth-Magnet-Discs-10-per-Pack-07045HD/202526363
Please go easy on me as I'm just getting into 3D design and 3D printing. That being said, I'd love to receive some feedback, or requests for changes to better myself. I'm learning Fusion 360 so I can make more accurate designs.
Edit #1: I made the dice areas a little deeper to accept better foam and allow slightly larger dice. I also adjusted the size of the plugs to verify they are the proper size to fit in the holes.
Edit #2: I made a new version that has completely contained magnets so there is no longer a need for the plugs. This creates a better aesthetic and more secure finish, plus the post processing is a bit simpler to accomplish this way. To accomplish this you must use your slicer to put a pause in the gcode right before it starts the layer where it would cover the magnet holes. It would also be pertinent to ensure the extruder won't be paused over one of the holes, so ensure that you've configured the extruder to move away from your print. My extruder does have a screw that attaches it to the hot end and the magnets are strong enough to pull out of their holes onto this bit, so applying a small drop of glue to the base of the magnet is key, but be sure not to have this glue tough the top layer of your print otherwise you may run into problems. Also, make sure you pay attention to the polarity of your magnets to ensure they will attract the other half, rather than repel. I have also adjusted the finger holds a bit so they run the entire length of the vault instead of just by the mini location. This will ensure a better grip and easier separation of the two halves without disturbing your dice or mini. I will leave the other models up for anyone who doesn't want to this this work, but I've also included a new photo of a print I did in natural PLA so you can see how it comes out when done right.
Edit 11/26/2018: I've uploaded a newer version of this model that I feel is better to hold and use, as well as a bit nicer looking. I don't have any photos of the completed items right now, but I have printed in wood with magnets and all works perfectly.
Similar models
thingiverse
free
DishwasherPlacard and Magnet pocket by gerdtdj
...t was a bit challenging pausing the printer in the right spot. a better way would be to insert a gcode pause at the right moment.
thingiverse
free
Mini hex-bit holder with print-in-place magnet by mikesshopworks
...d actually kept the magnet in-place perfectly.
i printed in petg with 4 perimeters and about 30% infill. they print very quickly.
thingiverse
free
Magnetic Juul Holder by BillTheCat
...;d just de-burr it rather than mess with the scale.
here's a vid of it in action: https://www.youtube.com/watch?v=ycgwlyhiuf8
thingiverse
free
Press and Glue Denture Bit Holder by HuberD
...ts.
press and glue dentures 2 has a pair of 8x3mm holes in the bottom for attaching magnets to attach the print to your tool box.
thingiverse
free
Crimping die case by Nubbit
...or abs to ensure you don't permanently damage your magnets.
if anyone decides to make this i would love to see some pictures!
thingiverse
free
Star Wars Destiny Deck/Dice Tray by Trashpanda042
...se.com/thing:2838080 to add places for magnets to hold a lid in place. i used 6x2mm magnets and they hold the lid on really well.
thingiverse
free
Anet Tabbed Magnetic Extruder Fan Access [resized] by danricho
...magnets "captive" by pausing the print at 7.3mm so that i could add the magnets prior to the final 0.4mm of top layers.
thingiverse
free
Knurled Finger Ratchet - Magnetic by aero253
...t the magnet. the hole is designed to accept the magnet and then print over top of it.
you can also print it without the magnet.
thingiverse
free
Hex Dice Vault / Case
...like both sizes for different reasons, so here are both.
the magnet cutouts are for 8mm x 3mm magnets, which i hotglued in place.
thingiverse
free
Magnetic base tile 2x2 openlock by Mitchell_Cheng
...ng prints, the ones in the pictures were printed on a minimal setting to allow me to test them more quickly.
hope you guys enjoy!
Aethernex
thingiverse
free
Cylindrical Lithophane Lantern by Aethernex
...mazon.com/gp/product/b079dlvjm8/ref=oh_aui_detailpage_o02_s00?ie=utf8&psc=1
if anyone has questions, please feel free to ask.
thingiverse
free
DnD dice holder and spell slot tracker by NealHatesMath
...of two different projects. the dice tray is from aethernex and the spell slot tracker is from justuspr. if...
Dice
3d_export
$5
dice
...dice
3dexport
dice geometry
3d_export
$5
Dice
...dice
3dexport
a dice for poker
3d_ocean
$4
Dices
...dices
3docean
dice dices
this was created 3ds max 2014. file contains obj, 3ds, max, fbs file types.
3ddd
$1
dice+
...tic dice on electronic devices, in addition to technology.
everything made in 3ds max + vray blend material with light number.
3d_ocean
$2
dice
...dice
3docean
3ds arman3dg dice games low max poly
dice [2 texture color 512-128, 1024-256] (3ds max file- 2010, 2011, 2012)
turbosquid
free
Dice
...dice
turbosquid
free 3d model dice for download as blend on turbosquid: 3d models for games, architecture, videos. (1393051)
turbosquid
free
Dice
...dice
turbosquid
free 3d model dice for download as obj on turbosquid: 3d models for games, architecture, videos. (1310801)
turbosquid
free
Dice
...dice
turbosquid
free 3d model dice for download as blend on turbosquid: 3d models for games, architecture, videos. (1250342)
3d_export
$5
rol dice
...rol dice
3dexport
rol dices
3d_ocean
$3
Dice+Cards
...dice+cards
3docean
dice+cards
Carrying
3ddd
$1
carry-on pouf
...carry-on pouf
3ddd
пуф
carry-on pouf, textures included
3ddd
$1
Carrie chair
... hickory chair
фабрика hickory , стул carrie chair! размеры: высота 890мм ширина 660мм глубина 710мм
design_connected
$11
Carry On stool
...carry on stool
designconnected
offecct carry on stool computer generated 3d model. designed by stenberg, mattias.
turbosquid
free
carry-on poufs
...
turbosquid
free 3d model carry-on poufs for download as max on turbosquid: 3d models for games, architecture, videos. (1209554)
turbosquid
$15
Carrying box
...squid
royalty free 3d model carrying box for download as ige on turbosquid: 3d models for games, architecture, videos. (1338653)
turbosquid
$5
Carry Pouf
...ty free 3d model carry pouf for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1637327)
turbosquid
$10
Gamma Carrie
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$11
Carrie LED Lantern
...carrie led lantern
designconnected
menu carrie led lantern computer generated 3d model. designed by norm architects.
turbosquid
free
Suzuki Carry Minivan
...rbosquid
free 3d model suzuki carry minivan for download as on turbosquid: 3d models for games, architecture, videos. (1377802)
turbosquid
$9
Carry black coin
...d
royalty free 3d model carry black coin for download as max on turbosquid: 3d models for games, architecture, videos. (1494700)
Tray
archibase_planet
free
Tray
...tray
archibase planet
tray salver tea-tray
tray 1 n210312 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver tea-tray
tray 2 n210312 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$8
tray
...tray
3dexport
design of tray
archibase_planet
free
Tray
...tray
archibase planet
tray salver stand
tray - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver
tray n050408 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver kitchen ware
tray - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver
tray 2 n050408 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver kitchen ware
tray n241211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
tray salver office ware
tray n160808 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Tray
...tray
archibase planet
donuts donuts tray donut food
tray donuts n190614 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Case
3d_export
$1
case
...case
3dexport
case
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case + cakes - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
showcase show-case glass case
glass-case for chips - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case shelving drawer
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case rack locker
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case drawer kitchen furniture
case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case cupboard shelving
glass case - 3d model for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case handbag suitcase
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
case suitcase
case 5 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Case
...case
archibase planet
locker case dresser
case - 3d model (*.gsm+*.3ds) for interior 3d visualization.