Darkwing Duck Gas Gun Display Stand by gthmnyt2580

Last crawled date: 3 years ago

I was a huge Darkwing Duck fan growing up and saw there was a design of the Gas Gun that was created by TJJohn12 here:https://www.thingiverse.com/thing:1605298
I loved finally having one in my hands but needed a way to display it when not battling Negaduck, so I created a display stand to go along with it.
Please keep in mind that I haven't created a 3D model in years, so it's very basic but get's the job done.
The overall model consists of 2 parts which are the main base and the holder piece that holds up the front of the gun. The main base part has holders built into it for the bottom of the handle and the bottom of the front holder. All you need to do is super glue the front holder into the slot of the base.
Both parts can be printed flat.
It was modeled in Fusion 360 and then printed on a CR-10 with 3D Solutech filament at 0.1 resolution. The nozzle temp was 207 degrees. The initial bed temp was 72 degrees while the printing temp was at 65 degrees for the rest of the print.
Enjoy!