Cycle desk camera tripod stand by Noctaro

Last crawled date: 3 years, 1 month ago

This is a simple 1 axis desk stand for cameras. You can mount actioncams, small DSLR cameras (~600gram), microphones or your mobile phone onto it.
I like to use it if i want to film solder work, for this it works quite nice.
You will need 1 M3 screw with nut for the camera mount. The mobile mount needs 2 additional M3 screws and nuts.
The 2 slider parts for the mobilephone need to be screwed together in a distance where you phone will snap in.
I have printed it with PLA at 0.4mm layerheight using 45% infill. Also i recommend using at least 2 shells.
If you need camera screws, have a look at this awesome cusomziable thingi by stylesuxx ->https://www.thingiverse.com/thing:2749041
Have fun and let me know if you have ideas to improve it :)
Update:
i reduced the distance between the mount rings, to be able to tighten the screw a bit better.
added model for a tpu antislide mount - @stylesuxx thanks for the feedback :)