Thingiverse
Customizable Cuvette Adaptor by Emanresu
by Thingiverse
Last crawled date: 3 years ago
Most spectrophotometers are designed to hold a 1 cm cuvette with outer dimensions of 12.5 X 12.5 mm, however it is often desirable to use a cuvette with a shorter path-length.
This thing generates an adaptor that will stably position cuvettes that are thinner (in the beam path dimension) than the typical 1 cm pathlength cells in a spectrophotometer.
(The current version assumes that the cuvette is just as wide as the sample compartment in the dimension perpendicular to the beam path.)
This thing generates an adaptor that will stably position cuvettes that are thinner (in the beam path dimension) than the typical 1 cm pathlength cells in a spectrophotometer.
(The current version assumes that the cuvette is just as wide as the sample compartment in the dimension perpendicular to the beam path.)
Similar models
thingiverse
free
Cuvette holder by Seosamh
... got a new spectrophotometer, but it wouldn't hold the 50mm. cuvettes we had, so we just designed and 3d printed our own one.
thingiverse
free
Customizable spectrophotometer cuvette rack by jwchew
..., 2x3, or 2x12).
if your printer is capable of bridging a ~1 cm gap without supports, then no supports are needed for this print.
thingiverse
free
spectrophotometer cuvette adapter by pancala
...spectrophotometer cuvette adapter by pancala
thingiverse
for unico 1100rs spectrophotometer
thingiverse
free
2 mm cuvette adapter
...2 mm cuvette adapter
thingiverse
simple 2 mm cuvette adapter for general use in spectrophotometers.
3dwarehouse
free
Starna Cells fluorometer cuvette, 52-Q-5
...5. based off descriptions in company literature. #cell #cuvette #dual_path_length #fluorometer #quartz #spectrophotometer #starna
thingiverse
free
Cuvette Holder - PE Lambda 19 by RevChris
...ered they could force cuvettes in the narrow orientation into the wide holder, which also breaks off the front of the old holder)
thingiverse
free
Spectrophotometer cuvette cap by nachtwolf_arg
...our sides, 0.461.2 mm
it's a hollow piece, so you should use 100% infill.
you can print up to 169 per ender 3 printing area.
thingiverse
free
Flow Through Cuvette Lid by tiffnk
...tached to outside tube which connects to long inside downspout. outflow tubing should be connected to the remaining outside tube.
thingiverse
free
DIY spectrophotometer case by sh4shayan
...a space for led light source and a detector similar to a silicon...
thingiverse
free
DIY Spectrophotometer by jakelmer
...eces (led holder, cuvette/photoresistor holder, and a cuvette removal tool), which fully conceals the cuvette from ambient light.
Emanresu
thingiverse
free
Customizable Dial Indicator Mount for Stepstruder by Emanresu
...le dial indicator mount for stepstruder by emanresu
thingiverse
customizable dial indicator mount for the front of a stepstruder
thingiverse
free
Tinkertoy Spool Holder by Emanresu
...f you have some tinkertoy (or similar building toy) it's really easy to make a sturdy spool holder that will fit most spools.
thingiverse
free
Optics Table Tool Caddy by Emanresu
...by emanresu
thingiverse
this is a tool caddy designed to store commonly used tools (mostly hex keys) handily on an optics table.
thingiverse
free
Case for MeeBlip SE Rev1.31 Synthesizer by Emanresu
...su
thingiverse
this is a 3d printable enclosure for a meeblip se (rev1.31) hackable synthesizer (meeblip.com, now discontinued).
thingiverse
free
Customizable Arduino Tray by Emanresu
...this thing check out laird and boelle's things:http://www.thingiverse.com/thing:202525http://www.thingiverse.com/thing:164778
thingiverse
free
Customizable Cuvette/Vial Rack by Emanresu
...ck with round or square holes. this was designed with cuvettes and vials in mind, but should be useful for any number of things.
thingiverse
free
Customizable Beam Height Standard by Emanresu
...ems it is necessary align the beam level at a specific height. this thing is a customizable height standard for leveling a beam.
thingiverse
free
Round Optics Table Tool Caddy by Emanresu
...nresu
thingiverse
this is a round tool caddy designed to store commonly used tools (mostly hex keys) handily on an optics table.
thingiverse
free
Customizable Spool Adapter by Emanresu
...his .scad file lets you quickly make a set of two printable "bearings" that will center your spool on your skinny axel.
thingiverse
free
Customizable M/F Shaft Coupling by Emanresu
...want to join too shafts together. it was originally designed to couple a stepper motor to a knob through a flexible drive shaft.
Cuvette
thingiverse
free
Cuvette holder / rack (10 cuvettes) by vsaggiomo
...r 10 cuvettes.
it prints easily without support or raft
tutorial on how to design it: https://www.youtube.com/watch?v=de253fmf7rs
thingiverse
free
Cuvette adapter by Chemist
...cuvette adapter by chemist
thingiverse
this is a adapter for use of cuvettes with 4 mm width in a normal cuvette slot.
thingiverse
free
cuvette rack by Phokas
...cuvette rack by phokas
thingiverse
cuvette rack
thingiverse
free
Standard cuvette by Dr_MCeeP
...standard cuvette by dr_mceep
thingiverse
a model of a standard cuvette.
thingiverse
free
Cuvette by seedwire
... ports permit an excitation beam to enter and fluorescence to be collected at 90deg.
this fits a 12.5mm x 12.5mm cuvette holder.
thingiverse
free
Cuvette Holder by aegorsuch
...cuvette holder by aegorsuch
thingiverse
holds a cuvette for a spectral project i made.
thingiverse
free
Cuvette holder by Seosamh
... got a new spectrophotometer, but it wouldn't hold the 50mm. cuvettes we had, so we just designed and 3d printed our own one.
thingiverse
free
Standard 3.5mL Cuvette by tcmartin24
...ndard 3.5ml cuvette by tcmartin24
thingiverse
3.5ml plastic cuvette. i modeled it to design a device that can contain a cuvette.
thingiverse
free
Cuvette Holder by bobthechemist
...holder by bobthechemist
thingiverse
a simple cuvette holder which was designed to assist students in creating a diy colorimeter.
thingiverse
free
Cuvette Rack by cmaschan
...tand stably on the bench. it is desirable to have a holder to avoid toppling. this holder can hold 8 cuvettes at the same time.
Adaptor
turbosquid
$15
Adaptor-2
...alty free 3d model adaptor-2model for download as dwg and ige on turbosquid: 3d models for games, architecture, videos. (1710809)
turbosquid
free
Adaptor plug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male DFP adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Female VGA Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male VGA Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Memory stick adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
male union tee adaptor
...ame is male union tee adaptor , it is used in home and industrial area . if you want to get yhis parts blue print buy it from me
turbosquid
$20
Male M1 Digital Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Male M1 Digital & Analog Adaptor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Samsung Travel Adapter 3D Model
...samsung travel adapter 3d model 3dexport charger white travel adaptor battery charging device samsung travel adapter 3d model g.lex...
Customizable
3d_export
$10
customizable sd port
...customizable sd port
3dexport
customizable sd port
turbosquid
$99
Customizable character
...alty free 3d model customizable character for download as max on turbosquid: 3d models for games, architecture, videos. (1152525)
turbosquid
$1
Customizable Mug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Customizable Spider Mech
... free 3d model customizable spider mech for download as blend on turbosquid: 3d models for games, architecture, videos. (1462055)
turbosquid
$20
Customizable Egyptian Pillar
...zable egyptian pillar for download as ma, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1307376)
turbosquid
$75
Fully Customizable Hospital
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Customizable Caste Pieces
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Customizable Tea Cup
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Water Bottle(Customizeable)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$49
Book customizable 3D Model
...3dexport
book booshelf novel teach library learn read pages cover fairy tales
book customizable 3d model guitargoa 74240 3dexport