Thingiverse
Customizable Curved Overhang Tester by kickahaota
by Thingiverse
Last crawled date: 3 years ago
This is an attempt at an overhang tester with a little bit of a different look. See how well your printer and filament can handle overhangs of thin materials. Check both for print quality and for how well each curve lines up with the backing.
I've included pictures of a 40mm version of this printed out on an Ultimaker 3 with PLA and standard Cura settings. You can see fairly typical results for this type of overhang test: a relatively serene and normal top surface, concealing the horror show that increasingly engulfs the underside as the overhang passes the magic 45-degree mark. With thin curves like this, errors are introduced from at least two sources: the usual sag of unsupported material at the edge of each layer, and the slight mismatches caused by the curves being pushed ever-so-slightly back and forth by the tip of the nozzle.
Feedback is welcomed.
I've included pictures of a 40mm version of this printed out on an Ultimaker 3 with PLA and standard Cura settings. You can see fairly typical results for this type of overhang test: a relatively serene and normal top surface, concealing the horror show that increasingly engulfs the underside as the overhang passes the magic 45-degree mark. With thin curves like this, errors are introduced from at least two sources: the usual sag of unsupported material at the edge of each layer, and the slight mismatches caused by the curves being pushed ever-so-slightly back and forth by the tip of the nozzle.
Feedback is welcomed.
Similar models
thingiverse
free
Support Material Benchmark Torture Test by SeaTurtle22
... the main tower and joins up with it later. it can also be used to test bed adhesion if you don't use a raft, skirt, or brim.
thingiverse
free
overhang tests by thumper06
...int.
the bridge test tests bridging from 5 to 100mm
the overhang angle test tests angles from 10 to 85 deg in 5 deg increments
thingiverse
free
Overhang angle calibration benchmark test by johnmazz
...nting works. i intentionally designed this hoping that the higher angles will fail, in order to educate those new to 3d printing.
thingiverse
free
Woven, Unsupported, 45 Degree Columns - Stress Test by Kevinkevin
...erse
just a quick stress test print to see how well your printer can handle overhangs and unsupported angled columns. good luck!
thingiverse
free
Headphone Wallhanger
... from dangling around.
the piece you can see in the pictures was printed with white pla and then spray-painted in a satin black.
thingiverse
free
Curve Overhang Test by HeyVye
...erhang. concave surfaces perform much better than convex.
recommended to print without infill and top.
let's see how you go.
thingiverse
free
Overhang angle or Support test by eyn2k
...10 degrees to 80 degrees.
or
see how your printer manages with support material.
quiet straight forward print, hope it helps.
:)
thingiverse
free
Ugly Cat by Despild
...ugly cat by despild
thingiverse
you can test your printer about how printing long thin object well while printing tail of cat.
thingiverse
free
Customizable Shock Absorber by Pentland_Designs
...er.
i do not recommend setting the pitch higher than 3 unless you want to test to see how well your printer can handle overhangs.
thingiverse
free
Refined Raspberry Pi 4 Drive Bay Mount/Case by N_Putting
...ckness to multiples of 0.4mm
thinned out the back to save on material that was not needed.
removed faces that didn't line up.
Kickahaota
thingiverse
free
Clank! In Space! Card Boxes by kickahaota
...pace! card boxes by kickahaota
thingiverse
card boxes and lid suitable for the clank! in space! board game (without expansions).
thingiverse
free
Black Orchestra Card Boxes and Lid by kickahaota
...black orchestra card boxes and lid by kickahaota
thingiverse
card boxes for the black orchestra board game.
thingiverse
free
Filament Hole Size Tester by kickahaota
...ment is consistently sized? this small block just has a series of holes in .05-mm size increments for 1.75mm and 2.85mm filament.
thingiverse
free
Locking Box for One Night Ultimate Werewolf by kickahaota
...er games. includes a small 'sidecar' box for the role tokens.
also includes boxes for the "daybreak" expansion.
thingiverse
free
Parametric Round Coins Holder by kickahaota
...a preconfigured coin holder for us coins.
added labels for each coin slot.
label text no longer goes all the way through the lid.
thingiverse
free
Customizable Spool Label and Filament Clip by kickahaota
...s.
see the "measuring your spool" section below to find out how to measure your spool to make just the right clip size.
thingiverse
free
Filament Clip for XYZPrinting 1.75mm PLA by kickahaota
...ump" on the side of the clip marks the wider end -- you should insert the filament from this side, as shown in the picture..
thingiverse
free
Clank: A Deck-Building Adventure Card Boxes by kickahaota
...card stacks (with sleeves) and use the customizer at https://www.thingiverse.com/thing:2954310 to make a set that fits perfectly.
thingiverse
free
Customizable Card Boxes and Lids by kickahaota
...ishing it. you'll know these files because their thumbnails will say "you can delete this file from your thing." :)
Tester
turbosquid
$2
tester
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Virus tester
... free 3d model virus tester for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1526983)
turbosquid
$24
Hipot Tester
...odel hipot tester for download as skp, 3ds, dae, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1651595)
turbosquid
$10
Tester Cube
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
BIPED tester
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
99 Tester SM
...e 3d model 99 tester sm for download as ma, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1258979)
turbosquid
$19
Concrete Compression Tester
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
AC Electric Tester 2
...ectric tester 2 for download as max, ige, obj, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1464810)
turbosquid
$14
Digital Electric Tester Pen
...tric tester pen for download as max, ige, obj, stl, and sldpr on turbosquid: 3d models for games, architecture, videos. (1416100)
3d_export
$15
Probe Screwdriver 3D Model
...screw driver voltage volt electronic equipment tool electric contact tester detector flat head electrician electrical probe screwdriver 3d model...
Overhang
turbosquid
$16
Overhangs
...
royalty free 3d model overhangs for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1301095)
3d_export
$7
birch tree trunk with roots overhang scan pbr
...bj - .fbx - .blend 4k textures: - normal map - albedo - roughness please let me know if something isn't working as it should.
archibase_planet
free
Cornice
...cornice archibase planet cornice overhang cornice n101108 - 3d model (*.gsm+*.3ds) for interior 3d...
archibase_planet
free
Canopy
...canopy archibase planet canopy awning overhang canopy - 3d model (*.gsm+*.3ds) for interior 3d...
archibase_planet
free
Canopy
...canopy archibase planet canopy awning overhang canopy - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Canopy 3D Model
...canopy 3d model archive3d canopy awning overhang canopy - 3d model (*.gsm+*.3ds) for interior 3d...
archive3d
free
Canopy 3D Model
...canopy 3d model archive3d canopy awning overhang canopy - 3d model (*.gsm+*.3ds) for exterior 3d...
archive3d
free
Canopy 3D Model
...canopy 3d model archive3d canopy awning overhang canopy - 3d model (*.gsm+*.3ds) for exterior 3d...
archibase_planet
free
Canopy
...canopy archibase planet canopy awning overhang canopy n130814 - 3d model (*.gsm+*.3ds) for interior 3d...
archibase_planet
free
Canopy
...canopy archibase planet canopy awning overhang canopy 2 - 3d model (*.gsm+*.3ds) for interior 3d...
Customizable
3d_export
$10
customizable sd port
...customizable sd port
3dexport
customizable sd port
turbosquid
$99
Customizable character
...alty free 3d model customizable character for download as max on turbosquid: 3d models for games, architecture, videos. (1152525)
turbosquid
$1
Customizable Mug
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Customizable Spider Mech
... free 3d model customizable spider mech for download as blend on turbosquid: 3d models for games, architecture, videos. (1462055)
turbosquid
$20
Customizable Egyptian Pillar
...zable egyptian pillar for download as ma, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1307376)
turbosquid
$75
Fully Customizable Hospital
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Customizable Caste Pieces
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Customizable Tea Cup
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Water Bottle(Customizeable)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$49
Book customizable 3D Model
...3dexport
book booshelf novel teach library learn read pages cover fairy tales
book customizable 3d model guitargoa 74240 3dexport
Curved
3d_export
free
curved sword
...curved sword
3dexport
a curved sword
3ddd
$1
CURVE
...wave oscillates rhythmically across this rug.
hand knotted from tibetan wool, curve is available from stock in a range of sizes.
3ddd
$1
SYSTEMPOOL Serie Curve
..., serie curve , раковина
systempool serie curve
3ddd
$1
DIAMANTE Curved Bench
...diamante curved bench
3ddd
diamante curved bench скамья
diamante curved bench
3ddd
$1
Enne Curve Sofa
...enne curve sofa
3ddd
enne , curve
диван enne curve, размеры -h800x920x2350mm
design_connected
$27
Curve Sofa
...curve sofa
designconnected
living divani curve sofa computer generated 3d model. designed by lissoni, piero.
3d_export
$5
curve base handle
...curve base handle
3dexport
curve base handle
3d_export
$5
simple curve handle
...simple curve handle
3dexport
simple curve handle
turbosquid
$2
Curved leaf
...urbosquid
royalty free 3d model curved leaf for download as on turbosquid: 3d models for games, architecture, videos. (1641948)
turbosquid
$2
Curved Mouse
...rbosquid
royalty free 3d model curved mouse for download as on turbosquid: 3d models for games, architecture, videos. (1314525)