Thingiverse
Custom Uber Light by KillerSmurfling
by Thingiverse
Last crawled date: 3 years, 1 month ago
Stand Out from the Rest in the dark with this Updated DIY Uber Light Box.
The original was too thin, I have made the separate files and increased the thickness
You may sell these in your city, all I ask is that you donate 10% of each sale to the local children's hospital in your state.
I designed this box so you can add your own led combo to make your own light up box for your dash in cities where Uber says you don't need one. If you are going to print this with a multi-extruder download the .3mf files. The STL file is the whole thing but not broken up to fit most beds, each part is 150mm x 150mm so you will have to separate the parts. If you are printing this with a single extruder you can snap the letters and parts of the lid together when properly cooled and removed from the bed. Once you have assembled the light box to your satisfaction either glue or use adhesive to stick the lens or lid if you will to the top of the box.
Suggested materials would be Natural PETG Transparent for letters and uber logo and Black PETG These should be pretty resistant to heat in the car should you forget to remove your light at the end of the day.
Led installation is simple enough, line the box with foil using spray adhesive then stick your led strips around the edges of the box or cut them to fit the center. Run your wires through the back and snap the hole in with your wires in the small holes. Depending on the lights you use the results should be great. I'm using dual 12 inch multi-function multi-color with a 12v plug. This runs about $40 at Auto Zone. I will post a video once I get mine done. This is the first thing I will be printing on the Monstrosity 3D Printer if I can finish it this sunday.
Testing the lights in the light box part https://www.youtube.com/watch?v=RPPPrI2GgsM
Here is the Finished Product https://youtu.be/xj3bZd8IipA PLA Version is good only if you are good at remembering to remove the light during the day when not working. Don't place against windshield.
I will design a stand as soon as I can to mount it to your car dash
The original was too thin, I have made the separate files and increased the thickness
You may sell these in your city, all I ask is that you donate 10% of each sale to the local children's hospital in your state.
I designed this box so you can add your own led combo to make your own light up box for your dash in cities where Uber says you don't need one. If you are going to print this with a multi-extruder download the .3mf files. The STL file is the whole thing but not broken up to fit most beds, each part is 150mm x 150mm so you will have to separate the parts. If you are printing this with a single extruder you can snap the letters and parts of the lid together when properly cooled and removed from the bed. Once you have assembled the light box to your satisfaction either glue or use adhesive to stick the lens or lid if you will to the top of the box.
Suggested materials would be Natural PETG Transparent for letters and uber logo and Black PETG These should be pretty resistant to heat in the car should you forget to remove your light at the end of the day.
Led installation is simple enough, line the box with foil using spray adhesive then stick your led strips around the edges of the box or cut them to fit the center. Run your wires through the back and snap the hole in with your wires in the small holes. Depending on the lights you use the results should be great. I'm using dual 12 inch multi-function multi-color with a 12v plug. This runs about $40 at Auto Zone. I will post a video once I get mine done. This is the first thing I will be printing on the Monstrosity 3D Printer if I can finish it this sunday.
Testing the lights in the light box part https://www.youtube.com/watch?v=RPPPrI2GgsM
Here is the Finished Product https://youtu.be/xj3bZd8IipA PLA Version is good only if you are good at remembering to remove the light during the day when not working. Don't place against windshield.
I will design a stand as soon as I can to mount it to your car dash
Similar models
thingiverse
free
LED light strip plug for Lithopanemaker Lithopane Light Box by psikic
...hen glue the lid of the box on. you can then put a dab of glue on the outside of the plug to hold the wire in place if you wish.
thingiverse
free
Slide in Light Rail 150mm x 10mm by Vagan64
...led light rail mount for the tevo tarantula or similar measures 150mm x 10mm and slides in the bottom...
thingiverse
free
Adjustable Led lighting for K8200 by RobinSt
...ay be filled down a little bit and pressed in place.
a hole should be drilled at the most convenient place to connect the wiring.
thingiverse
free
Stackable Sieve
...in place with an impact adhesive.
this should be printed in a plastic with good layer adhesion. use pla or petg as abs will warp.
thingiverse
free
Prusa Mendel i2 RGB LED Light Strip Mount by Snarky
...ed set, you can add as many as your controller can handle.
created on sketchup and exporter via plugin, sketchup file included.
thingiverse
free
Poker card box by aNodyNos
... not use brim either but my printer has heated table and i also used petg which in general sticks better to the printing surface.
thingiverse
free
Desiccant Box by Zaniix
...e back out easily.
it holds about 1/3rd of a quart of desiccant, i filled 3 of these with a 1 quart (2lb) container of desiccant.
thingiverse
free
Daily pill box by C-son
... it should be resizable. not tested tho.
there are two lids with letters for english and swedish (and maybe other languages too).
thingiverse
free
Snap Box by phoryan
... up there, should have better grip and snap locking also chamfered the lid once i finished printing it i will put the results up.
thingiverse
free
Heart Box With Lid (for Valentine's Day!) by QuantumConcepts
...thingiverse my first thing! this is a heart-shaped box similar to the one kurt kobain spoke of in his...
Killersmurfling
thingiverse
free
Flash Gordon Logo by KillerSmurfling
...s one is going to be a tough one. trying to figure out how to do gradient but for now it is split to do the letters in two tones.
thingiverse
free
Chimera Vertical Mount with optional Sensor by KillerSmurfling
... mount with optional sensor by killersmurfling
thingiverse
for those building their printers who have the chimera cyclops setup.
thingiverse
free
Fidget Spinner Caps by KillerSmurfling
...hey are in they don't come out unless you break them.
for pla
210 on hotend
60 on bed
0.4mm nozzle
15% infill (optional 100%)
thingiverse
free
Doogie Howser MD Logo by KillerSmurfling
... like the show doogie howser md
just split the layers black for bottom and white for top with simplify3d single extruder coloring
thingiverse
free
Original Batman Logo by KillerSmurfling
... see what colors go to what layer levels
want to know how to print the logos i designed for yourself?https://youtu.be/rrxxexkqsb8
thingiverse
free
AIRWOLF Logo by KillerSmurfling
...ake a great decoration on a laptop back.
want to know how to print the logos i designed for yourself?https://youtu.be/rrxxexkqsb8
thingiverse
free
Dr Strange Logo by KillerSmurfling
...r thin should you want to back light it.
want to know how to print the logos i designed for yourself?https://youtu.be/rrxxexkqsb8
thingiverse
free
Garfield and Pooky drawn by Kat Inator by KillerSmurfling
... them in what i have on 3d builder without messing with the pallet.
same as the logos you can do this at 0.1 micron layer height
thingiverse
free
Logo for the 4th Doctor in Dr. Who by KillerSmurfling
... results can be achieved with simplify3d
want to know how to print the logos i designed for yourself?https://youtu.be/rrxxexkqsb8
thingiverse
free
GreatSword of Destiny by KillerSmurfling
... see angus from makers muse or jerry from barnaclese nerdgasm get a crack at this as i know they love great looking game weapons.
Uber
turbosquid
$9
Uber tank
...d
royalty free 3d model 3d tank uber scetch for download as on turbosquid: 3d models for games, architecture, videos. (1699599)
turbosquid
$49
HAD1-T Helineo Uber
...free 3d model had1-t helineo uber for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1605816)
3d_export
free
Download free Uber sword 3D Model
...download free uber sword 3d model
3dexport
youtoo32
uber sword 3d model bouchet 50494 3dexport
turbosquid
$10
Uber Super Spacey Dice Planet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
FN SCAR 3D Model
...obj weapon gun fn scar fn scar 3d model uber 19559...
3dfindit
free
UBER
...uber
3dfind.it
catalog: a&t
thingiverse
free
Uber Gnome by megane008
...uber gnome by megane008
thingiverse
my one of the kind gnome for the competition
renderosity
$9
Uber Suit for V4
.../>
- second skin suit,<br />
- helmet,<br />
- boots,<br />
- 5 materials for poser and daz studio</p>
thingiverse
free
Fast And Basic Clothing Hanger Divider (Uberized) by mofosyne
...ce think?
unlike the original design, this is not too practical. as the hole inside 20cm. unless you have a 20cm diameter hanger?
unity_asset_store
$35
Garage & Toolshed Prop Uber Pack by GameTextures
...hed prop uber pack by gametextures asset from gametextures.com. find this & other props options on the unity asset store.
Custom
3ddd
free
Customized
...customized
3ddd
комод
customized, chest, cabinet
3d_export
$50
Custom motorcycle
...custom motorcycle
3dexport
custom motorcycle
3d_export
$21
Funko custom
...funko custom
3dexport
funko custom
turbosquid
$2
Customs
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Customs
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Custom Car
...turbosquid
royalty free 3d model custom car for download as on turbosquid: 3d models for games, architecture, videos. (1584212)
3d_export
$7
Custom glasses
...custom glasses
3dexport
3d custom glasses;<br>textured with non overlapping<br>rigged: yes
turbosquid
$80
Custom sportbike
...d
royalty free 3d model custom sportbike for download as fbx on turbosquid: 3d models for games, architecture, videos. (1313435)
turbosquid
$30
custom truck
...squid
royalty free 3d model custom truck for download as max on turbosquid: 3d models for games, architecture, videos. (1329357)
turbosquid
$10
custom alien
...squid
royalty free 3d model custom alien for download as fbx on turbosquid: 3d models for games, architecture, videos. (1244065)
Light
archibase_planet
free
Light
...light
archibase planet
lamp lighting light
light - s2 - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
light luminaire lighting
light l0465 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
lighting
...lighting
3dexport
lighting
3d_export
$5
lighting
...lighting
3dexport
lighting in livingroom
turbosquid
$3
Lighting Tree with Lights
...d model lighting tree with lights for download as max and 3ds on turbosquid: 3d models for games, architecture, videos. (1585507)
archibase_planet
free
Light
...light
archibase planet
luster lighting solution
light - s - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
luster lamp lighting
light 1 - 3d model for interior 3d visualization.
archibase_planet
free
Lights
...lights
archibase planet
surgical lights surgical lamp
surgical lights (floor) - 3d model for interior 3d visualization.
archibase_planet
free
Light
...light
archibase planet
lighting luminaire candlelight
light l0463 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$18
street light-lighting-light-xia bing
...
3dexport
street light-lighting-light-xia bing<br>max 2015 v-ray 3 max 2015<br>textures<br>all files in zip...