Cubicle Hooks, Hangers and Magnet Holders for Haworth Compose cubicles (with STEP file) 3d model
3dmdb logo
Thingiverse
Cubicle Hooks, Hangers and Magnet Holders for Haworth Compose cubicles (with STEP file)

Cubicle Hooks, Hangers and Magnet Holders for Haworth Compose cubicles (with STEP file)

by Thingiverse
Last crawled date: 4 years, 3 months ago
This is a collection of cube hooks, hangers and magnet holders which were inspired by Mavericm1's Cubicle-hook. They are designed to clip over the top or side plates of a cubicle with a cross section of approx 77mm x 2.6mm. I have tested them and they snap on the top plate of my cubicle pretty firmly, but are easy to remove.
Sorry no pics of them installed, but these are designed to be used with Haworth Compose cubicles, which have a thin top and side plates that do not have overhangs on the edges. The profile of the top plate on the cubicles these are designed to fit is approx 77mm x 2.6mm , so basically a rectangle with those dimensions.
These have all been tested and work as intended.
There are several things posted here:
Coat hook:
Cube-Clips-1g-hook.stl
Cube-Clips-1g-hook-thin.stl (just a thinner version)
Magnet hangers (3 types which use 12x3mm Neodymium magnets):
These uses 4 magnets (2x2 stacked in each hole):
Cube-Clips-1B-Magnets-DOUBLE.stl
Cube-Clips-1B-Magnets-DOUBLE-TALL.stl
This uses 2 magnets:
Cube-Clips-1B-Magnets.stl
This is a clip with a button that has a 9mm small diameter, designed to fit though a grommet but could also be used for holding various items:
Cube-Clips-1H-Poster-Clip.stl
Cube-Clips-1H-Poster-Clip-Button.stl
Cube-Clips-1A-Poster-Clip-Button-Whiteboard.stl (smaller 12mm head button)
This is a flag holder which has a hole of approx 9mm diameter with three 1mm bumps arranged to help grip the flag better. There is no bottom on this, it is just a through hole. I may update this one further, but changes will be minor.
Cube-Clips-1K-flag-holder.stl
Finally, this thing is a simple low profile hook designed to allow hanging a white board or other lightweight item:
Cube-Clips-1L-WB-Hanger.stl
I posted a remix of a headphone hanger which uses Qoupd's "Headphone Holder to be mounted with one screw" (https://www.thingiverse.com/thing:3840789) which is a remix of polxuriach's "Headphone Holder" (https://www.thingiverse.com/thing:180851). You can find that here:
https://www.thingiverse.com/thing:4129244
These models are not oriented for printing and I printed them at 0.2mm resolution. STEP files are included for easy remixing.
If you make one and like it please post a make, if you have a comment or suggestion to improve it post a comment and I will see what I can do to make it better.

Tags