Thingiverse
CUBETRIX diy corexy 3D PRINTER by Nelujones
by Thingiverse
Last crawled date: 3 years, 1 month ago
3D Printing is an additive manufacturing process that creates a physical object from a digital design. There are different 3D printing technologies and materials you can print with, but all are based on the same principle: a digital model is turned into a solid three-dimensional physical object by adding material layer by layer.
Every 3D print starts as a digital 3D design file – like a blueprint – for a physical object. Trying to print without a design file is like trying to print a document on a sheet of paper without a text file.This design file is sliced into thin layers which is then sent to the 3D printer. Chuck Hull invented the first 3D printing process called ‘stereolithography’ in 1983 and from this priciple, he built the foundation of what we now know today as additive manufacturing (AM) – or 3D printing. In the same way ( almost ) I did it myself from a dream turned into design to create my own 3d printer with the name CUBETRIX.
Thanks to open source we can program our printer to create almost any object. As many of you have at home a prusa i3 clone with which I have spent more money than it should be spent: that if you have to modify the structure, that if you have to change the extruder and the list goes on and on and I decided to get down to work and create something much, much better at a price of a prusa clone.
CUBETRIX has 330x330x300 printing area, 32bits processor,32 steps per motor, 3.2 inches tft touchscreen, wlan and wifi conecion,10 times superior velocity compare to a i3 prusa clone,6 points autolevel ( depends of your config.) , very stable structure no more rare movements, leds on the extruder to better view of the prints, etc…….. But you can add any board/lcd you like: duet,ramps,etc… on this printer. Without more ado I present my project:
With the files you will get the pdf on how to build/view the structure and the BOM (bill of materials )pdf file.
(Note: The mesurements are for 330x330x300 build volume If you intend to make a larger/smaller print area, then increase/decrese the length of the 20x20 extrusions and rods for each axis by the difference )
BILL OF MATERIALS here:http://j.gs/Bzcs
Any components for 3d printers here: http://j.gs/Bzct
Everyone is going to say: Yes we have the files, but how are we going to build the printer, so comrades I have created videotutorials on how to build the CUBETRIX. Here there are:
https://youtu.be/FIoFsy0vo4shttps://youtu.be/ddlW879DVuMhttps://youtu.be/vOqs3rLRUIMhttps://youtu.be/4-6K37xLN5Yhttps://youtu.be/-6uwrWvEVCYhttps://youtu.be/eRzEGFzxzekhttps://youtu.be/xEuZqSGd2kUhttps://youtu.be/Y8xZGErfRu0https://youtu.be/gWqOnVIwQbEhttps://youtu.be/GEX_BdRdJ4Ihttps://youtu.be/IXUjoF206Jghttps://youtu.be/-suTswubrHshttps://youtu.be/WrstJzkwn68https://youtu.be/x1vA-aiFKX4https://youtu.be/1PUMSOtGME4
Time Laps prints: https://www.youtube.com/playlist?list=PLJV8Q4s8TA7ERRsbzOHb0hlG5tFO2GyxP
Alsow we have a facebook group dedicated to this printer and for 3d makers alsow. fill free to come in:
https://www.facebook.com/groups/213987689093445/
To configure the motherboard more easier I attached the firmware to the files.
Happy building/printing guys.
Every 3D print starts as a digital 3D design file – like a blueprint – for a physical object. Trying to print without a design file is like trying to print a document on a sheet of paper without a text file.This design file is sliced into thin layers which is then sent to the 3D printer. Chuck Hull invented the first 3D printing process called ‘stereolithography’ in 1983 and from this priciple, he built the foundation of what we now know today as additive manufacturing (AM) – or 3D printing. In the same way ( almost ) I did it myself from a dream turned into design to create my own 3d printer with the name CUBETRIX.
Thanks to open source we can program our printer to create almost any object. As many of you have at home a prusa i3 clone with which I have spent more money than it should be spent: that if you have to modify the structure, that if you have to change the extruder and the list goes on and on and I decided to get down to work and create something much, much better at a price of a prusa clone.
CUBETRIX has 330x330x300 printing area, 32bits processor,32 steps per motor, 3.2 inches tft touchscreen, wlan and wifi conecion,10 times superior velocity compare to a i3 prusa clone,6 points autolevel ( depends of your config.) , very stable structure no more rare movements, leds on the extruder to better view of the prints, etc…….. But you can add any board/lcd you like: duet,ramps,etc… on this printer. Without more ado I present my project:
With the files you will get the pdf on how to build/view the structure and the BOM (bill of materials )pdf file.
(Note: The mesurements are for 330x330x300 build volume If you intend to make a larger/smaller print area, then increase/decrese the length of the 20x20 extrusions and rods for each axis by the difference )
BILL OF MATERIALS here:http://j.gs/Bzcs
Any components for 3d printers here: http://j.gs/Bzct
Everyone is going to say: Yes we have the files, but how are we going to build the printer, so comrades I have created videotutorials on how to build the CUBETRIX. Here there are:
https://youtu.be/FIoFsy0vo4shttps://youtu.be/ddlW879DVuMhttps://youtu.be/vOqs3rLRUIMhttps://youtu.be/4-6K37xLN5Yhttps://youtu.be/-6uwrWvEVCYhttps://youtu.be/eRzEGFzxzekhttps://youtu.be/xEuZqSGd2kUhttps://youtu.be/Y8xZGErfRu0https://youtu.be/gWqOnVIwQbEhttps://youtu.be/GEX_BdRdJ4Ihttps://youtu.be/IXUjoF206Jghttps://youtu.be/-suTswubrHshttps://youtu.be/WrstJzkwn68https://youtu.be/x1vA-aiFKX4https://youtu.be/1PUMSOtGME4
Time Laps prints: https://www.youtube.com/playlist?list=PLJV8Q4s8TA7ERRsbzOHb0hlG5tFO2GyxP
Alsow we have a facebook group dedicated to this printer and for 3d makers alsow. fill free to come in:
https://www.facebook.com/groups/213987689093445/
To configure the motherboard more easier I attached the firmware to the files.
Happy building/printing guys.
Similar models
thingiverse
free
Prusa i3 MK8 clone air duct by maker_i3
...i simply glued it to the extruder. i also included a solidworks file so you can add your own.
printed with pla 0.2mm layer height
thingiverse
free
MKS sbase v1.3 board Case for Cubetrix by Palmodin
...printer with 2020 profile. no supports are need.
if you are building the cubetrix, i highly recommend buy an extra 240mm profiles
thingiverse
free
Prusa MK2 Z-axis fix in righ angle
...ut make it installation of threaded rods more easy)
how i install those parts on my prusa mk2 clone: https://youtu.be/cj05izone88
thingiverse
free
Prusa i3 MK2/S extruder screws cover by DaSebaa
... change filament! so i designed this.
my printer is a prusa clone but it may work with every printer with a prusa extruder.
enjoy
thingiverse
free
GUESS WHAT by Archos29
...nt identify a design or a sculptur.
for physics student identify a molecule.
you can custom it creating your own layers!
have fun
thingiverse
free
Custom Shelf Pin (IKEA) by pavel_si_
...to ikea shelf small hole :-)) as well.
don't not have a 3d printer? more info: https://3dtisk.pro we can make it for you. :-)
thingiverse
free
Prusa decorators! by obijuan
...se objects for creating decorators for your prusa mendel 3d printer
these decorators are attached to the prusa m8 threaded rods
thingiverse
free
FM Cryrstal Radio by cheungbx
...iate your contribution if you like my design:https://www.paypal.com/paypalme/billydiy
3d print using pla, no support, infill 40%.
thingiverse
free
3D Mantra by JoKhool
...nged at 3.0mm,
there is also a variation for dual extrusion printers as well.
designed to fit at 45˚ on a 300x300 build surface.
thingiverse
free
Tardis Box by CWarlord87
... printer till end of 2012, not sure how it will print out.
*update: made walls thicker so hopefully it should be more stable now.
Cubetrix
thingiverse
free
MKS sbase v1.3 board Case for Cubetrix by Palmodin
...printer with 2020 profile. no supports are need.
if you are building the cubetrix, i highly recommend buy an extra 240mm profiles
thingiverse
free
z axis bearing support moded- cubetrix by G_Dogg_777
...roved z_axis_bearing_support, for the cubetrix 3d printer.. this one keep the lead-screw planted, the original one keeps lifting.
thingiverse
free
Mod Cubetrix para apoyar todo el perfil by joystick79
...ezas podremos bajar los perfiles hasta ras de suelo mejorando la estabilidad
cubetrix: https://www.thingiverse.com/thing:2370539
thingiverse
free
Feet 2020 series profile Cubetrix by Palmodin
...feet 2020 series profile cubetrix by palmodin
thingiverse
feet for 2020 series profile. i print in tpu.
thingiverse
free
Pulley - Cubetrix Mod by Palmodin
...gn in order to make the idler pulley stronger. i add more screw holes. in total, three in the front and two more at the back top.
thingiverse
free
HeatBed Support- Cubetrix Mod by Palmodin
...hould chage the distance or drill it if you have another bed with another distance.
you need a 300x300 heatbed.
print two pieces.
thingiverse
free
Rod Side Support- Cubetrix Mod by Palmodin
...rk properly, the rod was not parallel to the structure due to these pieces. i change the position of the hole, in the two pieces.
Nelujones
thingiverse
free
Wire spool by Nelujones
...ued together. can be used to create a power generator or electromagnet and has a multitude of uses depending on what you want to.
thingiverse
free
perendev magnet motor Drum by Nelujones
...perendev magnet motor drum by nelujones
thingiverse
this is the drum fom the 3 wills i will upload the rest soon
thingiverse
free
Puzzle Cube by Nelujones
...nds will be amazed by its ease/complicity assembly and always in fashion design.
it will be a great and unique gift for everyone.
thingiverse
free
Cable and PTFE filament tube support by Nelujones
...uild ( hypercube 3dprinter ) yet but relize from tech2c videos that this kind of support will work like a charm for this printer.
thingiverse
free
Ergonomical handle adaptor by Nelujones
... just adding a simple double-sided adhesive tape to the flat side of the handle.
i recomend 100 % infill to be more durable..
thingiverse
free
Power suply case for Hyperbot 3d printer (mod. version) by Nelujones
...rbot 3d printer (mod. version) by nelujones
thingiverse
this is a modified version of the original accessories pack from tech2c.
thingiverse
free
Cable support for Hypercube 3d printer hotend by Nelujones
...e
this is an accessory for the hypercube printer which helps in picking up the cables etc.. from x/y cariage and hotend printer.
thingiverse
free
Origami lampshade by Nelujones
...ave been forced to print in 2 colors beacouse violet filament was not enough. these days i will paint the body part in 1 colour.
thingiverse
free
Stylish Desk Lamp by Nelujones
... filament even i advise that the inner part is transparent filament.
the best part is that could be printed without support.
thingiverse
free
Zip-Grip Zipper Pull by Nelujones
...p shut. ring diameter measures 2,9cm.
printing time 30min +/-
atention must be print in flexible filament only with 100% infill.
Corexy
thingiverse
free
CoreXY by Kaz_tech
...corexy by kaz_tech
thingiverse
this is the model of corexy platform. i separately put the parts on this place.
thingiverse
free
corexy plotter by tjwan
...corexy plotter by tjwan
thingiverse
parts for corexy mill inspired by http://der-frickler.net/technik/corexyportal
thingiverse
free
ScribbleJ CoreXY Beta by ScribbleJ
...j/corexy-v1https://github.com/scribblej/corexy-v1#corexy-beta
full gallery of development photos here: http://imgur.com/a/donun
thingiverse
free
CoreXY Emblem by emkajot
...by emkajot
thingiverse
an emblem for your corexy printer.
size: 100mm x 38mm x 2mm.
update: added a version with a proper mount.
thingiverse
free
SolidCore CoreXY Carriage by shanehooper
...olidcore 3d printer. this design could be used in other corexy 3d printers.
also see:https://3ddistributed.com/corexy-3d-printer/
thingiverse
free
CoreXY 3D Printer Model by ReginaFabricam
...bricam
thingiverse
this is an original design of a corexy printer.https://www.tinkercad.com/things/jggr9qk4s4p-3d-printer-corexy
thingiverse
free
coreXY Upper structure Left
...corexy upper structure left
thingiverse
my customized corexy 3d printer upper left parts
thingiverse
free
CoreXY by frankie
...ing machines, etc. the design is described in greater detail at http://www.corexy.com . a video is at http://vimeo.com/40914530 .
thingiverse
free
Endstop block for CoreXY carriage by svkeulen
...endstop block for corexy carriage by svkeulen
thingiverse
endstop for corexy carriage
thingiverse
free
X carriage for the CoreXY MGN12 by hackerbijay
...x carriage for the corexy mgn12 by hackerbijay
thingiverse
x carriage for the corexy frame
Diy
thingiverse
free
dockking diy
...dockking diy
thingiverse
diy dock king
thingiverse
free
DIY GoPro Dual handles (DIY ??? ????) by seokhunkim
...gopro dual handles (diy ??? ????) by seokhunkim
thingiverse
diy gopro dual handles.
youtube link : http://youtu.be/jrnu5ph7p_c
thingiverse
free
DIY Photobooth
...diy photobooth
thingiverse
here are some files for a diy photobooth i made myself, have fun with it
thingiverse
free
DIY keychain by arki03
...diy keychain by arki03
thingiverse
diy keychain
thingiverse
free
DIY Tattoogun by NRX
...diy tattoogun by nrx
thingiverse
diy tattoogun
thingiverse
free
diy ventilator by Devon3DP
... ventilator by devon3dp
thingiverse
diy ventilator covid 19 work in progresshttps://github.com/devon3dp/covid-19-diy-ventilators
thingiverse
free
DIY Climbing Hangboard
...diy climbing hangboard
thingiverse
2 part diy hangboard
thingiverse
free
DIY Keychain by sreenath
...diy keychain by sreenath
thingiverse
diy keychain,
for multi color pause and change filament at different elevations
thingiverse
free
Fume Extractor DIY by mwieland
...fume extractor diy by mwieland
thingiverse
diy fume extractor.
project page: https://www.tsb.space/bl0g/diy-fume-extractor/
thingiverse
free
OTTO DIY by bitsmaker
...otto diy by bitsmaker
thingiverse
otto diy dans eden robot için kullanabileceğiniz basit ve kullanışlı modeller
Printer
thingiverse
free
printer by riegel
...printer by riegel
thingiverse
printer
thingiverse
free
Printer by elnuvoldesign
...printer by elnuvoldesign
thingiverse
printer
thingiverse
free
3D Printer of a 3D printer by wacko
...3d printer of a 3d printer by wacko
thingiverse
a 3d print of the new low costs ready to print, 3d printer from www.pp3dp.com
thingiverse
free
Printer case light (X3D printer) by arekm
...printer case light (x3d printer) by arekm
thingiverse
printer case light.
thingiverse
free
Printer Knob by arthurTW
...printer knob by arthurtw
thingiverse
printer knob for delta 3d printer
thingiverse
free
3d printer part for Irapid printer by esadesad
...use damage to your printer. this solution fixes the platform of the printer with magnets and allows more precise printing models.
thingiverse
free
printer parts by kmoore22
...printer parts by kmoore22
thingiverse
printer parts for montevallo build your own 3d printer course
thingiverse
free
3D PRINTER by juju68
...3d printer by juju68
thingiverse
3d printer
thingiverse
free
Light on the printer by umitakin
...light on the printer by umitakin
thingiverse
light on the printer
thingiverse
free
Calibrate the printer by olo2000pm
...calibrate the printer by olo2000pm
thingiverse
calibrate the printer