Thingiverse
Cubeiron by jameswisnie
by Thingiverse
Last crawled date: 3 years, 1 month ago
This will change a lot as i add and edit parts
the idea is to convert your chiron from an anycubic printer to something better. i am calling the improved version the Cuberion
first parts are the Z_motor brace and lower side linear rod supports
added bottom corner supports and top front support/ belt braces
the idea is to convert your chiron from an anycubic printer to something better. i am calling the improved version the Cuberion
first parts are the Z_motor brace and lower side linear rod supports
added bottom corner supports and top front support/ belt braces
Similar models
thingiverse
free
CR-10 low support front brace by Chasong
...cr-10 low support front brace by chasong
thingiverse
i made a low support front brace in fusion 360.
thingiverse
free
Extrusion corner brace by goatzilla
... by goatzilla
thingiverse
simple corner brace for misumi 15x15 extrusion.
i print mine on the hypotenuse; no supports necessary.
grabcad
free
Leg Brace (Orthopedic)
...foot. suitable for 3d printing using flexible or rigid material. room for improvements and additions especially on the foot parts
thingiverse
free
Delta Corner Braces by 3dmpro
...tmr/topl clip
support
print instructions:
1 to 2 supports per mid brace / corner
2 btm/top per corner
1 mid brace clip per corner
thingiverse
free
Prusa i3 Frame Brace Support Eliminate Vibration by aleiovanevcp
...e brace support eliminate vibration, no need to disassemble any part of the printer. possible align perpendicular axis 90° x / y.
thingiverse
free
Anet a8 Frame brace for my sega brace PART#3 by 3DTSUJ
...top support works with the other braces
http://www.thingiverse.com/thing:2166204
http://www.thingiverse.com/thing:2165738
enjoy
3dwarehouse
free
Cargo Bay Support Brace
...cargo bay support brace
3dwarehouse
cargo bay support brace #omega_parts
thingiverse
free
Anet A6 Stepper Brace by JohnQ
...erse.com/thing:1896013
i also edited in some support. this breaks away with ease. so no big issues when printing without support.
thingiverse
free
Trex 600 Tail Boom Support Brace by Phil_590
...ttle brace to eliminate tail vibration on my trex 600 nitro and it worked perfectly! strap it to the support rods with 4 zipties!
thingiverse
free
Right Angle Support Brace by msiek
...specific project i had.
counter sunk holes: recess is 6.65mm x 2.3 mm. screw hole is 3.1 mm
straight holes: 3.783mm (m4.5x0.5)
Jameswisnie
thingiverse
free
table bumper edge pads by jameswisnie
... by jameswisnie
thingiverse
i got young kids, and kids fall
print in any tpu with low infill
print slowly and disable retraction
thingiverse
free
Beta Tank Divider by jameswisnie
...nfill you want recommend atleast 20%
divider setup fits 5 gallon fish tank
divider measures 8 inch(203 mm) x 8.75 (222 mm)
enjoy!
thingiverse
free
Wire wall bracket hangers by jameswisnie
...9;t feel like running out to the store for these so instead i made them. works well with finishing nails scale to any size needed
thingiverse
free
Kitchenaid mixer replacement foot simple design by jameswisnie
...ot simple design by jameswisnie
thingiverse
simple foot design, made two prints, found both ninjaflex and prline tpu worked well
thingiverse
free
A-Arm pin retainer by jameswisnie
...a retaining clip for front arm pin, secure to side with small screw and a shallow hole (1.5mm) drilled shallowly into control arm
thingiverse
free
PTFE/Capricorn tubing cutter by jameswisnie
...ibration
ptfe/capricorn tube cutter feed the tube inside and cut along the line, use a razor blade to cut.
insures straight cut.
thingiverse
free
Fast Traxx's Track Replacement by jameswisnie
... and error i made these
print them solid
print them in ninjaflex or any 85a shore hardness tpu.
print them slow 35 mm/s or slower
thingiverse
free
Geek3d/Fly board box by jameswisnie
...e trigorilla crap board
these are simple prints, don't over think them.
i used petg
print the plug in tpu for the flexibility
thingiverse
free
3018 laser bracket 60mm by jameswisnie
...92 mounting plate with 54wx50h hole spacing designed to slip fit around 20k rpm stock spindle motor on 3018 cnc engraver machines