CST-100 Starliner and Atlas V N22

Last crawled date: 4 years, 3 months ago

The Boeing CST-100 Starliner successfully launched on an Atlas V N22 on Friday 12/20.
This is a 1:1 scale model. Recommend printing at 1:100 scale :)
In order to print you should make:
1x atlas_core
1x atlas_stand
1x centaur
1x launch_vehicle_adapter
2x atlas_srb
4x atlas_srb_pin
1x starliner_cm_sm_with_cap (you can print it in its in-space configuration by printing starliner_cm_sm_no_cap)

CST-100 Starliner
From: https://www.boeing.com/space/starliner/
Boeing's Crew Space Transportation (CST)-100 Starliner spacecraft is being developed in collaboration with NASA's Commercial Crew Program. The Starliner was designed to accommodate seven passengers, or a mix of crew and cargo, for missions to low-Earth orbit. For NASA service missions to the International Space Station, it will carry up to four NASA-sponsored crew members and time-critical scientific research. The Starliner has an innovative, weldless structure and is reusable up to 10 times with a six-month turnaround time. It also features wireless internet and tablet technology for crew interfaces.

Atlas V
From: https://www.ulalaunch.com/rockets/atlas-v
Atlas V uses a standard common core booster, up to five solid rocket boosters (SRBs), a Centaur upper stage in a single- or dual-engine configuration, and one of several sizes of payload fairings.
Centaur is the world's highest-performing upper stage. The pressure-stabilized tanks combined with the lightweight Aerojet Rocketdyne RL10C-1 engine provides industry best thrust-to-weight ratio. The stage has demonstrated long-coast relight capability that enables it to service any orbital need.